Designed to comply with API 594 Adopting dual plate design for efficient sealing Valve inspection and testing comply with API 598 Available in series F16 and series F125 Series F16 check valve compatible with DIN, BS flanges Face to face according to ISO 5752 basic series 16 (wafer long) F125 check valve compatible with ANSI 125/150 flanges Available in size 2 to 24 inches Available in wafer type body Materials list: Body materials: cast iron, ductile iron Disc: ductile iron (with nickel plating or nylon coated), SS 304, 304L, 316, 316L, aluminum-bronze Seat: NBR, EPDM, neoprene, PTFE, Viton Shaft: SS304, SS316, SS410 Spring: SS304, SS316, SS410 Seal washer: NBR, EPDM, neoprene, Viton
Magnetic check valve was designed with magnet diaphragm, and sealed by the metal. it was used on the exhaust pipe of the compressor, for inside, it uses guide device and automatic suchtion design thant prevent reverse refrigerant flow in liquid lines and compressor discharge lines.
1. Its Material Is PVC 2. Size: 3/4" - 8"(20mm-200mm). 3. Alkali and acid resistant 4. Standard: DIN, ANSI, JIS. 5. With Socket End. 6. 100% factory tested no leak. 7. Durable and long lasting. Packing: box or poly bags, Carton.
Check valve class Full port pressure temperature rating 200 psi w.O.G. 350 f.S.P. Threaded ends conform to ansi b 2.1, bs 21, din 259/2999, stainless steel class 200 screwed cap, swing type disc, integral seat. 1/4"---4"
This reducing valve the new type pilot extra-huge membrane pressure reducing valve developed by our company. It is greatly improved on basis of normal pressure reducing valve. The membrane use new material, enlarging the working area, so the slight change of upper pressure or lower pressure can be fed back to membrane of main valve, and adjust the opening of main valve to ensure the constant pressure of lower stream pressure.
Inflatable disposable PVC anesthesia mask� is designed for use with automatic ventilators, manual resuscitators and anesthesia machine. Item NO.: TW8350-TW8356 Payment: T/T 30% and balance before shipment Product Origin: CHINA Color: Transparent Shipping Port: Xiamen, Shanghai, any port in China Lead Timeï¼? 30 days PVC aneshesia mask with check valve Air cushion anesthesia mask� is a medical device used to administer anesthetic gases to a patient through inhalation during surgical Interventions. Anesthesia masks have 4 point head strap harnesses to securely fit on the head to hold the mask in place as the anesthesia doctor controls the gases and oxygen inhaled. Winner Medicalâ??s (China)� disposable anesthesia masks� are comfortable and easy to use, patient comfort and ease of use were the top priorities when developing the winnerâ??s anesthesia face masks. Hightlights: -Plastic cross for nape fixation -Transparent shell for monitoring -Soft cushion for perfect fitting on face -Check valve to inflate or deflate Speciality:� � **Made of Phthalates free PVC, disposable **Conforms to Council Directive MDD/93/42/EEC concerning Medical **TW8350:  for neonate **TW8351:  for infant **TW8352:  for pediatric **TW8353: for adult-S **TW8354:  for adult-M **TW8355: for adult-L **TW8356: for adult-XL Packaging: **Poly bag **Carton Size: 55.5 * 34 * 46 cm ; **Qty/ctn:  200 pcs **Net Weight:  5.8 KGS; **Gross Weight:  8.8 KGS What is the difference between PVC anesthesia mask with check valve and without check valve? PVC anesthesia mask with check valve can be inflatable, while the mask without check valve can not. How many types of anesthetic? There are three main types: Local - numbs one small area of the body. You stay awake and alert. Regional - blocks pain in an area of the body, such an arm or leg. A common type is epidural anesthesia, which is often used during childbirth. General - makes you unconscious. You do not feel any pain, and you do not remember the procedure afterwards. How to distinguish disposable anesthesia/anesthetic mask from reusable anesthesia/anesthetic mask? Disposable anesthesia/anesthetic mask is made of polyvinyl chloride which is not autoclavable, while reusable anesthesia/anesthetic mask is made of silicone which is autoclavable.
It is also a type of check valve that operates because of the difference between upstream & downstream pressures. When the inlet pressure is high then the disc lifts up and the valve allows the fluid to flow to the outlet side. If the downstream or gravity pressure if higher than inlet pressure the disc gets back to its seat. This way reverse flow is blocked. For the smooth process it is important to have durable working disc and this is what we offer. We examine the raw material to be used in our product’s exporting. This results in durable quality production.
Wafer check valve is another type of check valve that allows only unidirectional flow. The advantage of employing check valves is that they automatically block the reverse flow with the change in pressure difference. Wafer check valves have thin design with the swinging disc as the main component. These valves are made to fit in tight spaces so it is desired to get them accurately designed. We offer cut-to-cut exporting and ensures its proper functioning before releasing the consignment.
Check valves are two port valves i.e. two sides opened. Swing check valve allows unidirectional flow. From one side fluid enters and from other it leaves. These are automatic valves that do not require open and close assistance. As they have single directional functionality, thus, automatically prevents backflow or reverse flow. We at Suraj Steelmet maintain inventory of finished swing check valves at best competitive prices.
Razor alternatives for spare parts
Ingersoll rand reciprocating piston air compressor 15T2 check valve 32162943
Valves are used in a variety of applications including industrial, military, commercial, residential, and transportation. Oil and gas, power generation, mining, water reticulation, sewerage and chemical manufacturing would constitute the majority of valves used by industry. The body material is grey cast iron, ductile iron or carbon steel. check valves are mechanical device allowing fluid to flow through it in one direction. These valves have two ports or two openings. From one opening the fluid enters while from the other the fluid leaves. These valves have many applications.
Lift Check Valve The disc of lift check valve is located on the valve seat sealing surface. And the disc can be free to move up and down, other parts is like a globe valve. When the fluid passes, the disc is lift from the seat sealing surface. When the fluid back flow, the disc falls back onto the seat and cut off the flow. Depending on the condition of using, the disc can be made of full metal construction, or be in rubber or rubber ring on the disc holder. Specification: Size: 1/2~12 Pressure Rating: Class150~2500LB Main Materials: WCB, WC6, WCC, LCB, CF8, CF8M, CF3, CF3M, 4A, LF2, F304, F316 etc. Design and Manufacture: BS 1868, ANSI B16.34 Face-to-Face:ASME B16.10, DIN3202 Pressure-temperature Ratings: ASME B16.34 Ends Connection: Flange, Butt Welding Inspection & Testing: API 598, EN12266 Feature: Bolted Bonnet - BB Lift or Piston Type Horizontal or Vertical Service Non-penetrate Disc Shaft
Swing Check Valve The swing check valve is also called non-re valve. The function is to prevent the fluid in the pipeline back flow. Swing check valve is mainly used for the one-way flow of the medium, and only allowing the medium to flow in one direction to prevent accidents. Generally, this type of valves should be installed horizontally in the pipeline. Specification: Size: 1/2~24 Pressure Rating: Class150~2500LB Main Materials: WCB, WC6, WCC, LCB, CF8, CF8M, CF3, CF3M, 4A, LF2, F304, F316 etc. Design and Manufacture: BS 1868, ANSI B16.34 Face-to-Face:ASME B16.10, DIN3202 Pressure-temperature Ratings: ASME B16.34 Ends Connection: Flange, Butt Welding Inspection & Testing: API 598, EN12266 Feature: Bolted Bonnet - BB Swing Type, Anti-rotation Disc Renewable Seat Rings Non-penetrate Disc Shaft Horizontal or Vertical Service
check valves are mechanical device allowing fluid to flow through it in one direction. These valves have two ports or two openings. From one opening the fluid enters while from the other the fluid leaves. These valves have many applications.
Ball Check Valve Fig. No. CV48S Size: DN25-DN80 for Threaded End,DN40-DN600 for Flanged End Design Standard: EN12050-4 Face to Face: EN558 Series48 Threaded according to ISO228-1,BSPP Flange drilling according to EN1092-2 PN10,PN16, ISO 7005-2 PN10,PN16 Working Pressure: PN10.PN16 Hydralic Test according to EN12266-1, ISO5208 Material conform to EN-GJS500-7. Counterweight Control Lever for selection. Suitable for both horizontal and vertical installation
Fig. No. CV3202 â?¢Size: DN40-DN600 â?¢Design Standard: EN1074-1.3 â?¢Face to Face: DIN3202-F6 â?¢Flange drilling according to EN1092-2 PN10/PN16. â?¢Working Pressure: PN10, PN16. â?¢Hydralic Test according to EN12266-1, ISO5208 â?¢ Material conform to EN-GJL-250,EN-GJS500-7. â?¢ Counterweight Control Lever for selection. â?¢ Suitable for both horizontal and vertical installation * EN1074-1.3
Type: Flanged Duckbill Check Valve, Slip on Duckbill Check Valve Size: DN50-DN1800 Rubber Material: EPDM, NBR, NR, CR, CSM, FKM etc. End Connection: Slip on/Flange Flange/ Clamp material: Galvanized Steel, AISI304 or AISI316 Flange Drilling: EN1092 PN10, PN16; AS2129 Table D/ E, ANSI B16.10 Class 150# etc. Pressure: PN10, PN16 Curved Bill, flat bottom is also available For more detail information kindly come to worgocn dot com or contact us sales at worgocn dot com freely. -
Model 137-010 consists of Robocon Valve (BALEM 130) and Two Flow Control Valve. This valve is installed at outline of pump to prevent back flow caused by Back Pressure. This valve is slowly opening to prevent sudden opening surges, When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube line, and the valve closes drip tight.
We offer a extensive variety of valves & cocks known for perfect size, wear & tear resistance, which are extensively used for controlling the flow of various liquids. Used in industries like chemical, pharmaceutical and other similar industries, these are designed in various shapes and sizes to cater to various needs of our clients. Our bronze vertical check valve isi marked to is-778/1984 class-i, screwed female end bsp hydraulic pressure body tested - 1.5 mpa, seat - 1.0 mpa.
