Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Frozen fishes and shrimps , frozen halal meat , en 590 10 ppm & jet fuel a1, icumsa sugar 45, hms 1&2 iron scrap and used rails , aluminium ingot , copper cathode and millberry , frozen and fresh seafood, meat and frozen french fries.Export
We are a supplier of the following minerals iron ore, silica sand, silica quartz lumps as well as silica quartz mesh(powder), plaster of paris, gypsum, hydrated lime, limestone, bentonite, dolomite, chormite, barite, fluorspar , rock salt, soapstone, feldspar, fire clay, kaolin clay, china clay, bleaching earth, calcium fluoride and calcium carbonate, nephrite jade,mica white, mica black, mica flakes, mica scrap..Special offer: we have the deposits of quartz milky and our offer is us$100 per mt fob karachi
Iron Ore Specs : Variable FeO 16.28 % Hierro Total 64.02 % SiO2 4.03 % AhO3 0.24% s 0.07% p 0.04 % CaO 1.34 % MnO 0.00%, PbO 0.00 % MgO 0.00 % ZnO 0.00%, TiO2 0.00% As 0.00 % Cu 0.02 % K2O 0.00% Origin Mexico Minimum monthly shipment 100,000MT CFR terms only (Maximum quantity of 200,000MT per month is possible) Annual contract only The price shall be quoted against firm inquiry. Payment: 90% by DLC / MT700 Nontransferrable and confirmed and payable at sight (Loading port) after SGS for quality and quantity. Balance 10% shall be against discharge port inspection at the discharge port in China Sellers performed shipments in the past ( during 2019 prior Covid period ). This offer is valid for a limited period and the response to queries shall be only through email so long as inquiries are received with KYC of the buyer/end user.
Can supply: PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade. Post industrial. Materials are bulk. Can load bulk in 1x40' Open Top container approx. 20-24 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
We are counted amongst the leading names of the company that is into offering Iron Ore. The products offered by us are of very fine quality. These products have rich content of iron as a result the users get relatively high amount of iron. Our products are very easily enriched as a result our clients save their precious time and money. We supply Iron Ore in different types- Iron Ore Lumps (Hematite & Magnetite) Iron Ore Fines (Hematite & Magnetite)
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of Mangnetie (Fe3O4, 72.4% Fe) hematite (Fe2O3 69.9%) goethite ((FeO(OH), 62.9% Fe) Limonite (FeO(OH) n(H2O) 55% Fe) siderite (FeCO3, 48.2%, Fe) Ores containing very high quantities of hematite or magnetite, typically greater than about 60% iron, are known as natural ore or direct shipping ore, and can be fed directly into iron-marking blast furnaces. Iron ore is the raw material used to make pig iron which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel. In 2011 the Finacial Times quoted Christopher LaFemina, mining analyst at Barclays Capital, saying that iron ore is " More integral to the global economy than any other commodity except perhaps oil". MOQ 25,000 Supplied from Oman
Our products are made of cast iron, which has the characteristics of high temperature resistance, and the surface is vegetable oil, which is very healthy.
CAST IRON FOUNDRY We produce grey cast iron and ductile iron in our foundry in city Konya /Turkey. We use for melting a modern medium frequency induction furnace (Meltingcapacit y: 500 kg / hour) Cast iron / graphite flakes in piece weights from 0,15 up to 400 kg in the qualities EN GJL 200-300 according to DIN EN 1561 [Or GG 20, GG 25 and GG 30 according to DIN 1691] Ductile cast iron in piece weights from 0,15 up to 400 kg in the qualities EN GJS 400-700 according to DIN EN 1563 [Or GGG 40, GGG 50, GGG GGG 60 and 70 according to DIN 1693] High alloyed cast irons (NiHard,White cast iron) The whole production controlled with a consistent quality assurance system All charges are monitored In a separate test laboratory . Mechanical tests ,r¶ntgen and crack tests done by our government laboratory and documented. Individual pieces and small series are manufactured in the hand moulding. Larger quantities are produced by shell molding process.
Cerium oxide, chrome flour, carbon, coke powder, red iron oxide, cobalt oxide, aluminum oxide, nickel oxide, lithium carbonate.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Product name Iron scrap Type Casting iron, Iron scrap Metal 100% Alloy or not Non-alloy Secondary or not Non-secondary
Zirconsand, columbite, tantalite, quartz,feldspar and iron ore.Transportation
Natural pine water is obtained by the steam distillation of the needles, twigs and cones of pine tree. Here are some of the medicinal uses of the pine plant and pine water: Skin care: the most widely known use of pine essential water is in treating skin problems. Dermatologists often prescribe the water in treating the following conditions: psoriasis, itching, eczema, scabies, sores, and fleas; Cosmetics: pine essential water has a distinctive essence and gives a sweet aroma to the cosmetics it is used in. Pine plant water is widely used as massage water and in perfumes and other scents.
Iron castings