Cashew nuts, cardanol, palm oil, nuts oil, argan oil, sunflower oil, coconuts, d2 gas oil l o.2/62, rebco, diesel gas oil ultra low sulphur diesel 50 ppm, low sulfur diesel 10 ppm, mazut 100, lpg , jp54, automotive fuel diesel, bitumen, cst 180, sugar.Broker
Nigeria bonny light crude oil (blco).Consultancy, brokerage and marketing of crude oil and other petroleum products
CR03 Jet A1, EN590 FOB CI DIP Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan FOB CI DIP & PAY Transaction Procedure 1. Seller mandate issues SCO, buyer issues official ICPO including buyer company certificate and buyer international passport to the seller. 2. Seller Acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and return back Commercial Invoice (CI) along with Tank Storage Agreement (TSA). 3. Seller provides Buyer with the Below Listed PPOP: a) Certificate Of Origin b) Dip Test Authorization (DTA) c) Injection Report (IR) 4. Buyer endorse DTA with his Tank Farm or Extend Seller Tank to enable Buyer receive full GPS coordinates of the tanks, Hub Numbers, Terminal Access Permit to dip test in Seller Tank and obtain fresh SGS Report. 5. After a successful Dip Test in Sellers tanks, Buyer takes over sellers tank or Seller injects into buyers vessel / Tank and the buyer makes the payment for the total value of the product injected into the tanks through the means of MT103-TT. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all Intermediaries involved in the transaction Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.
CR02 Jet A1, EN590 CIF ESCROW PROCEDURE Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan CIF ESCROW PROCEDURE 1. Buyer issues LOI, seller issues FCO for buyer to sign and return with following below: a) Buyer official Irrevocable Corporate Purchase Order (ICPO). b) Buyer company certificate of business incorporation/ registration. c) Buyer Company comprehensive profile. d) Buyer�¢??s Copy of identification materials (international passport). 2. Seller issues SPA to buyer for review/countersign forward back to seller with acceptance letter, and seller issues Product Passport/Company Certificate and appoint Escrow Company in USA for both parties to sign Escrow agreement. Both parties pay consultation costs (1) to the attorney law firm before an escrow agreement can be drafted. 3. Seller and Buyer sign Escrow agreement and buyer makes 10% Escrow deposit of total value products for one shipment and Seller schedules shipment, ships out the cargo to the buyer destination port and sets of Full POP documents below to buyer/delivery documents send to buyer below; All party sign NCNDA/IMFPA. a) Certificate of Authenticity. b) Bill of Lading. c) Q88. d) Packing List Certificate. e) Export Clearance Permit. f) Insurance Policy. g) Commercial Invoice. h) Company registration certificate. i) Certificate of origin GOST. j) Passport of the Product. k) Commitment to Supply. l) Statement of Availability of the Product. m) Export clearance Affidavit. n) Registered, Legalized, Approved SPA. 4. Transaction certificate for 12 months which gives the BUYER the legitimate approval to purchase oil products from the Republic of Kazakhstan for yearly contracts. 5. The Buyer makes the product payment in full via MT-103/TT and Escrow company return 10% Escrow deposit to buyer. Seller transfers the Title Ownership to the Buyer Company and the Seller pay commissions to all involved via NCNDA/IMFPA.
CR01 Jet A1, EN590 Tank To Vessel Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan Tank To Vessel Procedure (TTV ROTTERDAM PORT) NOT NEGOTIABLE. 1. Buyer issues official ICPO including buyer company certificate and buyer international passport to the seller 2. Seller acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and returns back Commercial Invoice (CI) along with, all parties sign NCNDA/IMFPA; a) Charter Party Agreement (CPA) b) Pipeline Injection Agreement (PIA) 3. Seller provides Buyer with the below listed PPOP: a) Certificate Of Origin (COO). b) Local Dip Test Analysis Result Report (Equivalent to SGS). c) Injection Report (IR). d) Tank To Vessel Injection Agreement (TTVIA) to be endorsed by Buyer Pipeline Company. 4. Buyer endorses TTVIA with his Pipeline Company or transfers Title to the buyer's name to facilitate physical verification and dip test of the product in seller tank before Injection into vessel. 5. After a successful Dip Test in Sellers tanks, Buyer Pipeline Company starts Injection into the Buyer Vessel or Seller injects into buyers vessel and the buyer makes the payment for the total value of the product injected into the Vessel through the means of MT103-TT. 6. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. 7. The seller pays all Intermediaries involved in the transaction and close the transaction. Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality:LNG Price TTO;$260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Terms;MT103/TT/DLC/LC/ESCROW/BTC Below procedures are NOT NEGOTIABLE. TANK TO VESSEL TAKE-OVER STANDARD PROCEDURE 1. Buyer issues official ICPO with company registration, buyers passport data page and banking details. 2. Seller issues MOU to buyer and buyer signs and send back to seller 3. Upon receipt of the countersigned original MOU from the buyer, seller emails to buyer the below listed documents:- 1) Certificate of Product Origin 2) Product Passport (Quantity & Quality Dip Test Analysis Report) 3) Bill of Lading 4) Tanker Vessel Q88 5) Cargo Manifest 6) Payment invoice for Title Takeover, 7) Ullage Report. 4) Upon buyer receipt of the documents, within 48 hours buyer contact the vessel captain and verifies the shipping documents of the product onboard the tanker vessel and pays 5% of the cargo value for the title takeover which amount to the sum of $450,000.00 5) Upon seller receipt of the title takeover payment, Seller transfers the title to the potential buyers company's name and issues all documents to the buyer company's name and send via swift from sellers bank to buyers bank the full prove of product documents. 6) Buyer carries out the CIQ/SGS inspection and upon a successful inspection; buyer pays via TT MT103 for the full product to the seller and after commences vessel to vessel transfer of the product. 7) The inspection at the loading port still remains the Russ Standard GOST R Quality and Quantity Analysis Report while inspection at the discharge point will be performed by Societe General De Surveillance SGS or CIQ at the expense of the potential buyer
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality: LNG Price TTO $260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Payment Terms MT103/TT/DLC/LC/ESCROW/BTC Below profcedures are NOT NEGOCIABLE. CIF STANDARD TRADING PROCEDURE 1. Buyer issues ICPO with Company Profile and Buyer Passport Copy, Companys registration Copy. 2. Seller acknowledges ICPO and issue to Buyer a Letter of Acceptance and Guarantee. 3. Seller issue Draft Contract SPA to Buyer. Buyer review SPA open for any amendment, sign and return to Seller for approval. 3. Seller registers and legalizes the signed Sales and Purchase Agreement contract and provides the registered, legalized and notarized SPA including PPOP as listed below. A. Certificate of Origin. B. Commitment to Supply. C. certificate of conformity D. Statement of Availability of the product. E. Product Export license for Allocation Issued by Ministry F. Allocation invoice 5. buyer secures allocation from the refinery (securing allocation at buyers expense). 6. Upon buyer securing allocation, Seller issues and register the Full set of POP with the Ministry of Energy and Justice, and with the loading Port Authorities, and charter of vessel for product Shipment. 7. Seller send to Buyer the full set of POP documents, vessel documents including SGS report at Origin Country to Buyer (by Bank to Bank and by email). Loading commence according to shipment schedule for departure from origin port within the specified working days after Buyer final notification of POP verification and Confirmation. POP DOCUMENTS: a)Certificate of Incorporation b )Act of Transfer c) Commercial Invoice d) Company Tax Payers Certificate e) Fresh SGS Report at Loading Port f) Tank Receipt g) Vessel Q&Q and Quality Specification h) Bill of Lading i) Certificate of Non-Wooden Package j)Notice of Readiness (NOR) k) Estimated Time of Arrival (ETA) l) Authorization To Sale (ATS) m) Cargo Declaration / Conforming Warrant n) Charter Party Agreement (CPA) to transport the product to the Discharge Port o) Ullage Report p) Customs Declaration Certificate. q) Product Allocation Certificate r) Notarized NCNDA/IMFPA and Endorsed by Seller Bank 8. within 3 banking days of the Vessel arrival at Buyer destination port, upon Buyers Confirmation and satisfaction with product buyer makes payment via TT/MT103 to Seller against Shipping documents and Title transfer. 9. Product discharged into Buyers storage.
All our Avocados are grown at 1,000-3,000m above sea level with maximum day temperatures of 28C & night temperatures of 12-15C. This is very different to product grown in Spain, Mexico, South America, New Zealand & Australia which grow mainly at Sea Level, and in very dry areas with a lot of heat. Our Avocados do not get stressed as they grow at high altitude. During the day the trees and the fruit grow, and at night they rest. As a result of this the fruit takes an extra one -two months to mature. This results in a superb Avocado with a strong colour, rich flavourand nice texture. Due to the rains we get twice a year around the Equator the trees grow naturally. There is need for additional irrigation during the dry season but not much water is used. This means our water footprint is also very low. At high altitude there are very few pests and diseases & the trees continue to grow and with minimal pest pressure so there is little to no chemicals sprayed. Our Frozen Avocados are harvested at optimal maturity, and then natural ripened. After this each avocado is handled, one by one, by our team of ladies who are skilled food handlers & have been trained on post-harvest Avocado processing, to prepare the halves, chunks and slices. Each piece of the Avocado is handled with a lot of care, and individually frozen at -35C to capture the essence of the fruit and not allow any damage.We can pack for consumers in 300gms / 500gms 1kg, 2kg or 5kg ziplockbags.
- Icumsa 45, 150, 600, 1200. - Packaging: 50kg. / NOTE: Please follow the standard procesure, we will respond to your requests and price after we recieve NCNDA, ICPO or LOI, and POF. - Icumsa 45, $425 CIF China -Payment by transferrable LC
We are state of the art production technology for various microalgae species. Our modular design enables us to simultaneously cultivate several algae species, alongside specific nutritional enrichments, allowing to attend to market & customer needs. Our professional team developed thorough and exclusive know-how of commercial cultivation protocols for 9 selected species., targeting major business sectors: Aquaculture, Nutritional supplements. If any hatchery who is interested, we can put them to talk to the specialist directly.
Applications; This grade is intended for general applications like chemical synthesis, dyes, leather, fire extinguishers, water treatment, plastic molding, flue gas treatment & in the drilling industry, sodium bicarbonate is used to chemically treat drilling mud when it becomes contaminated with calcium ions from cement or lime. It is NOT intended for applications, directly or indirectly, related to human consumption.
Piston available for Hyundai and Kia
PRODUCT: Chicken Paws SIZE: 35G and above PRICE: TBD SPECIFICATION: GACC Approved for Slaughter house and Processor GACC No. to be released on receipt of ICPO CARRIAGE: CIF
Refined Petroleum Products including Diesel Gas D2 Oil Gost 305 82, Virgin D6 Fuel Oil, Diesel EN590, Diesel Gas Oil Ultra Low Sulphur Diesel, Light Cycle Oil (lLCO), Aviation Fuel Grade JP54, Aviation Fuel Jet A1, Automotive Gas Oil (AGO) and Fertilizers like Urea 46, DAP and NPK.
USDA approved
ICUMSA 45 Grade Raw Unrefined/Refined Sugar White/Brown
USDA Approved
Fuels products of: ja54, jet a1, d6, diesel gas d2, ultra low sulfur diesel, en590, light cycle oil, ago (automotive gas oil), rebco, liquefied natural gas, lpg, espo blend crude oil, and any other fuel products such as asphalt, petroleum coke, mazut 75 & 100 bitumen 60/70, bitumen 80/100. urea n46% prilled & granular. mineral fertilizers to the agricultural sector russian origin urea 46% prilled & granular npk fertilizers. di ammonium phosphate (dap) 18 46 0 automotive grade prilled urea adblue diesel exhaust fluid (def) high purity imidazolidinyl urea metal products of: used rail, steel billets, copper cathodes, copper millberry, aluminum ingot, iron ore, coal, copper powder, and any other metal products. agriculture products such as palm oil, icumsa 45 sugar, crude/refined soybean oil, gmo/nongmo soybeans, common wheat, yellow corn, olive oil, sunflower oil etc... meat chicken paws and feet and pork, beef, etc... syringes (made in korea), test kit, ppe.
Hot rolled steel sheet,430 stainless steel coil,301 stainless steel,304 stainless steel strip,steel strip,steel banding,steel coils,stainless steel,steel pipe,steel tube, seamless steel pipe, welded steel pipe/tube,stainless steel pipe,glavanized steel wire,galvanized steel coil,galvanized steel sheet,roofing sheet,corrugated steel sheet,gas spring tubes,precision steel tube and fabricating metals,rolling springs,shutter springs,shutt door components,spring box,bia stable steel spring coil,65mn/c75 /sk5 steel strip.
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder