We are the manufacturers and exporters of Floor Coverings especially DOORMATS, RUGS, CARPETS, We offer these items in guaranteed qualities with attractive prices:- (1) COCO MATS 1.BC1 & VC1 COIR BRUSH CREEL DOORMATS â?? It is 100% Coir fiber mat with 25MM thick 2.FM2 FIBER MAT MADE IN 100% COCO FIBER WITH DENSE WEAVE & 45MM THICK 3. PVC Tufted Mat:-- Coco fiber Tufted in PVC material available in 15MM, 17MM, 20MM thickness 4.COIR CORRIDOR MAT/ HOLLANDER MAT- FANCY DESIGNS. It is coir mat made in coir yarn (2)RUBBERIZED COCO MATS- (This category is made with coir tufting them on rubber) (a) Rubber Molded Coir Brush mats - 20MM Pile - 40x60cms, 40x70, 45x75, 60x100, 60x90cms (b) Rubberized Non Brush Coir mats & Rubberized Panama coir mat with 2/2 weave.. (5) RUBBER DOOR MATS *Rubber Hollow mat- 16MM, 22MM - Sizes: 40 x 60cms, 50x100cms, 80x120cms, 100x150cms, *Rubber Honey Comb Mat - 12MM-40 x 60cms, 40 x 70cms , *Hexagon Hollow mat - 22MM- 40 x 60cms , 45 x 75cms, 40x80cms, * Interlocking Rubber mat -12MM, 14MM - 3 x 3, 3 x 5 & 100 x 100cms, * Beveled mat - 14MM- 60 x 90cms, 90 x 150cms, * Fingertip mats - 12MM- 34 x 32, 32 x 39, 36 x 72, * Rubber Pin mat/stud mats -10MM -35 x 60cms, 40 x 60cms 45 x 75cms, * Rubber Grill mats.- 10MM- 40 x 60cms, 35 x 60cms (6) COTTON MATS AND RUGS ( Material is 100% cotton) (a)Cotton Printed Mats, yarn dhurries available in Persian Design- assorted sizes & design (b) Cotton RAG RUGS available in Multi and dyed yarn & Cotton Bath mats and Rugs. (7) POLYPROPOLINE MATS ( PP WITH RUBBER BACK& RUBBER EDGE) size are 40x60, 40x70, 45x75cms (6) JUTE MATS & JUTE RUGS - available in HERRINGBONE AND BOUCLE qualities (7) HANDMADE WOOLLEN CARPETS AND DHURRIES IN VARIOUS DESIGNS AND SIZES HANDKNOTTED AND HANDTUFTED CARPETS MADE IN TRADITION AND NEW PATTERNS (8) GEO TEXTILE- COIR MESH, COIR PITH, COIR BLOCKS, ROPE, MATTING ETC (9) COIR MATTINGS- available in Herringbone, Boucle and Panama coir 10) PVC BACKED COIR ROLLS- Material is Vinayil on bottom and coco fiber on surface available in 15MM and 17MM qualities with the size 1x10 mtr, 1x12 mtr, 1x15 mtr, 2x10mtr, 2x12 mtr, 2x15 mtr rolls..
Item: TP208-LV TP208-ST Printing Method: Thermal Dots/line: 384 dots/line Resolution: 8 Printing Width(mm): 48 Paper Width(mm): 58 Feed Resolution(mm): 0.125 WxDxH(mm): 67.4x30.8x30.7(TP205) 66.8x43x15.2(TP208) Weight(g): 38 Head temperature detection: Thermistor Paper detection: Photo-sensor Operation voltage range(V): 3.0 - 9.0 4.2V - 9.0V Logical voltage(V): 3.0 C 7.0 Recommended Paper: Operating temperature(C): 0 - 40 Operating humiture(RH): 20% - 80% Storage temperatue(C): -25 - 70 Storage humidity(RH): 10% - 90%. OPP bag/set, EPS tray/sets; according to customer's requests.
Feature: this machine is suitable for grinding and polishing peripheral edge and bevel of different shape flat glass. It can process semi-automatic procession for circular glass. Five-star suction tray adopts vacuum clamping. Its rolling speed can be adjusted at random during working. Install and adjust easily while processing different size glass. Technical specifications: 1. Thickness: 3 ~ 25mm 2. Bevel edge angle range: 0 ~ 20 degrees 3. Maximum width of bevel edge: 32mm 4. Maximum diameter: 2000 mm 5. Minimum diameter: 120 mm 6. Power: 3.2 kw 7. Weight: 800 kg Packed by plastic film or wooden case.
Product Description: SANLI blood collection needle for single use Product Specification/Models: blood collection set Size: 18G,20G,21G,22G,23G,24G,25G Color: pink, yellow, green, black, blue, orange Holder for Multi-sample needle 20mm*55mm Holder for butterfly needle 19mm*53mm Other Information: We are professional manufactory dealing especially with the export of blood collection kits. We are in a position to accept orders according to the customer's samples. Certificate: CE Payment: L/C, T/T, Cash Delivery: DHL , TNT ,EMS Origin: HUNAN LIUYANG Minimum Order: 100000 Packaging: 6000/BOX Samples: Free Sample Price: US$0 Remarks: We are professional manufactory dealing especially with the export of blood collection kits. We are in a position to accept orders according to the customer's samples. 100pcs/tray 4000pcs/carton
CNC Router Nc router dm 4040 Features: 1) machine body: whole cast iron or cast aluminum 2) work dimensions: 400*400*100mm 3) z-axis working area: 45mm or 100mm 4) cut thickness of material: ín20mm 5) max. Speed: 4, 200mm/min or 5500mm/min 6) mechanical precision: 0.01mm 7) software: type 3 software, artcut software, artcam software 8) max. Power consumption: 900w 9) power source: ac 220/50hz 10) driver type: stepper motor 11) memory: 1mb 12) spindle: 800w variable speed, water-cooled motor 13) spindle speed: 0 - 24, 000rpm 14) blade diameter: 1 - 6mm 15) control system: artcut or weihong (ncstudio) or dsp (usb interface) 16) command: g code, u00, mmg, plt 17) interface: rs232 18) with english lcd 19) running circumstance temperature: 0 - 45 20) relative humidity: 30% - 75% Applications: Can be used for advertisement engraving, advertisement cutting, stone processing, cu and al molding, mold manufacturing, wood processing, craft manufacturing, light box cutting, building mold cutting, indoor decoration cutting, light equipment mold processing, sign and mark manufacturing, acrylic board processing, as well as stamp cutting and pcb cutting The size is 600*600*100mm, weight is 50kgs, the machine is packed by the veneer which donot need to suffocating.
Specification: DescriptionKitchen cookware, enamel roaster, oval roaster, turkey roaster, chicken roaster Item no.St-1002 Size(dia.*hgt.)Customized MaterialIron Thickness0.5mm or customized CapacityCustomized ColorWhite/black/red/blue/coffee/cyan/peach/yellow/ivory white/imitation silver or customized CraftsDecal/hand-painted/spraying UsageHome, restaunrant, office, outdoor, gift, promotion Moq1000pcs Supply ability9800000pcs/month CertificatesIso9001:2008, sgs, tuv, bv, lfgb, fda, gdccfe Leading time3-15 days based on quantity Payment termsT/t, l/c, western union, paypal CustomizedOem, odm are acceptable No. Of employees200-500 people No. Of r&d staffs20-30 people No. Of qc staff30-40 people Relevant hot productsStock pot, mug, butter plate, pie dish, baking tray, bbq grill, enamel decoration, etc Flow process: enamel body manufacturing--surface cleaning--enameling--drying and baking--decorating Features: 1. Light and beautiful 2. Easy to handle and clean 3. Break-resistant, acid and corrosion resistant 4. Non-stick and good flavor for food, environmetally friendly 5. High quality attested by lfgb, fda, gdccfeand advanced technology supported by germany wangneer production line 6. Customerized designs, logos and labels are welcome Packaging&delivery: Packaging details: master case dimension--56cm*41cm*29cm 6pcs/carton, 2490pcs/20'gp, 5100pcs/40'gp, 6060pcs/40'hc Delivery details: 3-15 days based on quantity Free technical support for lifelong 24 hours online after-service 12 months warranty Packaging&delivery: Packaging details: master case dimension--56cm*41cm*29cm 6pcs/carton, 2490pcs/20'gp, 5100pcs/40'gp, 6060pcs/40'hc
Qs-5100 desktop automatic lead-free reflow oven Wholesale qs-5100 ic heater infrared reflow wave oven Introduction The "ir lead-less reflow oven" is equipment that used for electron production and maintain of smt technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the request of the smt production technique completely. The ¡ãtemperature control curve¡à of the equipment can be adjusted accurately, so it can satisfy the request of many kinds of soldering paste which are different material parameters. It can shut down and alarm the faults automatically. Also it has many functions, such as soldering, maintenance and drying. The structural performance and operation has been upgraded and improved. Using chinese-english bilingual operating system and efficient and convenient power switch. Main technique parameter 1.Working voltage: ac220v(ac110v order) 2.Working frequency:50-60hz 3.Maximum output power: 600w 4.Heating methods: infrared radiation and hot air mix heating 5.Operating system: chinese-english operating system 6.Working mode: automatic soldering mode, maintenance mode adjustable 7.Temperature curve paragraph: warm-up, heating, soldering, heat preservation and cooling segment. 8.Range of temperature and time on warm-up: 70~150 c, 0~5min 9.Range of temperature and time on heating: warm-up temperature to 250 c, 0~5min 10.Range of temperature and time on soldering: heating temperature to300 c, 0~30s 11.Range of temperature and time on heating preservation: soldering temperature(0~50 c) 12.Tray specifications: 180*120mm 13.Size: 300*250*160mm
QS-5180C Desk Infrared reflow oven Introduction The "MINI IR REFLOW OVEN" is equipment that used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the request of the SMT production technique completely. The "temperature control curve" of the equipment can be adjusted accurately, so it can satisfy the request of many kinds of soldering paste which are different material parameters. It can shut down and alarm the faults automatically. Also it has many functions, such as soldering, maintenance and drying. The structural performance and operation has been upgraded and improved. Using Chinese-English bilingual operating system and efficient and convenient power switch. Main technique parameter 1.Working voltage: AC220V(AC110V order) 2.Working frequency:50-60Hz 3.Maximum output power: 1650W 4.Heating methods: infrared radiation and hot air mix heating 5.Operating system: Chinese-English operating system 6.Working mode: automatic soldering mode, maintenance mode adjustable 7.Temperature curve paragraph: warm-up, heating, soldering, heat preservation and cooling segment. 8.Range of temperature and time on warm-up: 70~150 c, 0~5Min 9.Range of temperature and time on heating: warm-up temperature to 220 c, 0~5Min 10.Range of temperature and time on soldering: heating temperature to 300 c, 0~30s 1.Range of temperature and time on heating preservation: soldering temperature -(0~50 c) 12.Tray specifications: 305*320mm 13.Size: 460*372*275mm
china coal 0001 Introduction of BZJ5038B Bottle packing Semi-Automatic shrink sleeve labeling machine and BSE5040A PE Film shrink packaging machine BZJ5038B Bottle packing Semi-Automatic shrink sleeve labeling machine is suitable for wrapping pop-cans, bottles, etc, with bottom-tray or without bottom-tray, working with BSE-5040A jet PE-film shrink tunnel or other PE shrink tunnel BSE-5038. Enlarge packing range or custom-made machine according to customers requirement. Characteristic of BZJ5038B Bottle packing Semi-Automatic shrink sleeve labeling machine and BSE5040A PE Film shrink packaging machine Upper and down electromagnetic switch prevent sealing mistakes, and protect operator. Every simply and easy to adjust machine to match different packing size. Simple operation and maintenance with high packing efficiency. Schneider AC contractor, and Intelligent temperature controller performs stable. Automatic alarm security system protects machine and operator. Large power conveyer motor, with stepless speed regulating, ensures smooth feeding. Two large power fans make the temperature of shrink tunnel every even and stable, this ensures the excellent effect of shrinking in one time. Super cooling system cools the packing and makes the figuration perfectly. Specification of BZJ5038B Bottle packing Semi-Automatic shrink sleeve labeling machine and BSE5040A PE Film shrink packaging machine Model BZJ-5038B(Pneumatic) Model BSE-5040A Power supply 220-240V, 50-60Hz;1.8KW Power supply 3phase 220V/380V 50-60HZ Capacity 0-6 packs/min Heater power 20KW Sealing time/shrink time 0.5-1.5s, 0-0.6s Conveyer speed 0-10m/minute Conveyor loading 30kg Tunnel size(L*W*H) 1500*500*400mm Film thickness 0.03-0.12mm Conveyer loading 50KGS Max. Max. packing dimension(L*W*H) 450 x 270 x 350mm Machine size 2500*820*1680mm Min. packing dimension(L*W*H) 250 x 60 x 60mm Machine weight 470KGS Machine size(L*W*H) 1020 x 830 x 1980mm Shrink film PE,POF,PVC,PP
Idm ch-480net Brief introduction Idm ch-480net pdh multiplexer transmits 16 e1 and two 100mbps ethernet networks over one or two fiber channels. The optical interface supports simple als function, code of e1 interface is hdb3 which meets all the international standards. It also has perfect monitoring and alarm function, high degree of integration, low power consumption and stable performance. Both desktop type and integrated type are available. 220vac/-48vdc power supply alternative. It can be widely used in the mobile base stations, remote module of the switch and ddn private network and etc. Features 1.Provide standard 16e1 transmission and two 100m ethernet. 2.Ethernet ports support vlan and flow control. 3.155mbps speed rate of the optical interface and transmission distance more than 50km. 4.Support e1 loopback of cot (central office terminal) and rt (remote terminal), easy to test and manage. 5.Optical interfaces with 1+1 channel protection.(either one fails, the other will back it up) 6.Nms interface optional (rs232/ethernet). Specifications Power supply 220vac/-48vdc Consumption: 40w¦10% Optical interface Rate 155mbps¦50ppm Wavelength 1310nm/1550nm Physical connector Fc/sc Sensitivity Better than -36dbm E1 interface Channels 16 Rate 2.048mbps¦50ppm Comply with Itu-t g.703 Code Hdb3 Impedance 75 unbalanced and 120 balanced Ethernet interface Rate 100mbps, 10m/100m auto-negotiation Comply with Ieee802.3, 10/100base-tx Duplex Full/half auto-negotiation Operating environment Temperature: 0¦c~40¦c Humidity: 90% (non- coagulation) Dimensions 440mm+230mm+45mm (width + depth + height)
Toyota prado - TXL - spare tyre under: Engine : 2.7 liter , L4 , 2TR-FE , 4 speed automatic transmission, petrol Spare tire: Ground tire(under floor) Tire brand: Dunlop Towing hitch: Without Package option 2: Tx steering, shift, pkb:leather Tire and disc wheel: 265/65r17 7.5j alumi Tool(factory installation): Jack+jack handle+hub nut wrench Vsc: Vsc+trc Stabilizer: Normal Engine coolant: Llc 30% Roof rail: Without Rear quarter glass: Green uv cut Ash tray: Fr cup type Accessory connector: Fr(dc12)+rr(dc)+dk(ac220) Radiator grille guard: With(resin) Headlamp L: projector h parabora silver Outside rear view mirror: Rm, retractable, colored Avs(tems): Without Clearance and back sonar: Rr 4-sensor Windshield glass: Green acoustic w/top shade Rear seat: 5dr:7 rr1:6:4(slide, walk in, rec)+rr2:5:5(manual fold down) Package try trim&tonneau cover: Without Fuel tank protector: W/b Air conditioner: Dual auto w/fr indicator control Steering wheel: Leather Washer fluid: With(capacity:4.75l) Anti-theft system: Immobilizer Sun roof and moon roof:Without Grade package: Tx-l Package option 1: Chrome+colored Air bag system: D+p Cool and hot box: Cool box Touch-up paint: With Front fog and driving lamp: Bumper built-in Production segment: Segment a Cr plate (gulf vin): With Owners manual: Arabic/english(combined) Rear audio: Without Dest. Package (except europe): Gcc r2 Headlamp cleaner: With Fuel tank capacity: W/b(resin):87l Speedometer: Normal km/h Audio(overseas market): Cd6/bt general 9sp Vehicle category: Mpv, m1, ldv, wgn Side and rr step: For 5door Body stripe: For 5door Headlamp leveling: Manual Engine: 2tr-fe+air pump unleaded Horn: Flat type w/e-mark J-tacs accessory: With Tire pressure gauge: With for low pressure type Fire extinguisher: With, install (b-type) Triangle caution plate: 1pcs loaded (toyota) First aid kit: Compact kit Floor mat: Lhd ivory +039j/m +241dd Accessory wood pkg: Woodgrain steering+at knob Model year: 2011 model
Er will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted. 7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running. 8. The whole machine adopts plc control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm. 9. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade 10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently. 11.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning. Model Hrbtmj-1300h Hrbtmj-1500h Hrbtmj-1600h Max size of cover face 1300mmx1250mm 1500mmx1250mm 1600mmx1250mm Mix size of cover face 360mmx360mm 360mmx360mm 360mmx360mm Economic speed 0-80 piece/min 0-80 piece/min 0-80 piece/min Precision +-1 +-1 +-1 Power 6kw 6kw 6kw Size 8.8m x 1.95m x 1.5m 8.8m x 2.15m x 1.5m 8.8m x 2.25m x 1.5m Weight About 3t About 3t About 3t
According to the developing trend of clinical histology and the several decades' experience of our factory for manufacturing pathological microtome , yd-1900 cryostat is a special freezing microtome which adopted the newest technology in the world Functional features 1.Mpu (microprocessor) control the temperature and lcd display automatically, and control the function of the section and trimming semi-automatically. 2.Two compressor for freezing .Five freezing place : two freezing tray , freezing specimen holder , freezing box , freezing knife. 3.Beautiful streamline design 4.Specimen retraction function , protects specimen from blade injury. 5.Adopt advance import actuation system for advance of the specimen holder . 6 uv lamp sterilization system and fluorescent lamp for lighting 7 defrost automatically ( set arbitrarily in -1-24 hours ) 8 automatic retraction system for section . 9 automatic retraction system for specimen holder . 10 anti-roll system which made the slice flat . 11 slice the specimen flat , thin , even and continuously. Technical parameter. Temperature of freezing box: -5f¦~-35f¦(fa2f¦) Temperature of freezing tray: -10f¦~-40f¦ Temperature of freezing specimen holder : -5f¦~-40f¦(fa2f¦) Temperature of freezing knife: -5f¦~-25f¦ Range of section thickness Trimming thickness: 1-60um Setting value : from 1-60um 1um increment Maximum sample: 55mm Maximum vertical specimen stroke:59mm Maximum horizontal specimen stroke :28mm via step motor Range of angle adjustment of freezing knife: 0-15fp Specimen orientation on x/y +c axes 8fpand specimen rotation on z +caxes 360fp Dimension: 600f¯640f¯1150mm Weight: 120kg Power : 560w
Product Specifications Product Classification Portfolio BLRAND Product Series FTP Series Product Type Modular jack Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America Dimensions Compatible Cable Diameter, maximum 9.00 mm | 0.35 in Depth 38.30 mm | 1.51 in Height 21.50 mm | 0.85 in Width 17.20 mm | 0.68 in Electrical Specifications ANSI/TIA Category 6A Transmission Standard ANSI/TIA-568-C.2 | ISO/IEC 11801 Class EA Environmental Specifications Flammability Rating UL 94 V-0 General Specifications Cable Type Shielded Color Silver Package Quantity 12 Packaging Type Tray in box Panel Thickness, recommended 1.60 mm Mechanical Specifications Conductor Gauge, solid 2622 AWG Conductor Gauge, stranded 24 AWG Conductor Type Solid | Stranded Contact Base Material Beryllium copper Contact Plating Material Gold Contact Plating Thickness 1.27 µm Material Type Polycarbonate Outlet Type Standard Termination Type IDC Wiring T568A | T568B Regulatory Compliance/Certifications AgencyClassification RoHS 2011/65/EUCompliant
china coal0001 Introduction of BSS-2032 heat shrink tunnel wrapping machine for bottle label 1.BSS-2032 label shrink packaging machine are mainly applied to shrink label in the middle of bottle, and label of product in bottle shape, cup shape, or barrel shape. 2.Its advantage is that bottle is able to turn in 360 degree, so the heating of label is very even. 3.This enhances shrink effect greatly. 4.Furthermore, in order to fit different size bottles, bottle tray on conveyor is made adjustable, and bottle is hold tightly without shaking Features of BSS-2032 heat shrink tunnel wrapping machine for bottle label Model BSS-2032 Voltage 220V/50-60HZ Power 8.0KW Tunnel size 1200X200X350mm Max.packing size 120X300H Conveyor motor DC50W/220V Conveyor speed 0-10m/min Max.loading 15KGS Shrink Film POF, PVC, PP Weight 66KGS Dimension 1500X400X1520mm P
Model: TP205 Printing: Printing method thermal line dot printing Number of dots/line 384 Resolution (dots/mm): 8 Printing width (mm): 48 Paper width (mm): 58 Speed (mm/sec) :MAX 80 Paper path: curved Detection: Head temperature detection by thermistor Platen position detection by mechanical swith Out of paper detecton by photo interruper Power supply: Operation voltage 4.2V - 9.0V Logical voltage :3.0 7.0 Service life: Pulse activation (pulse) 100 million Abrasion resistance (Km): 50Km Operating temperature (OC): 0-40 Operating hunmidity (RH): 20%-80% Storage temperature (OC): -25 to 70 Storage humidity (RH): 10%-90% Dimension (W*H*D): 69.8 x 28.3 x 31.7 Mass (g): 38.5g Be compatible with aps elm: 205-LV/HS. OPP bag/set, EPS tray/sets; according to customer's requests.
ST6030+SM6040 Automatic sleeve sealing shrink packaging machine is commonly used for packaging beverages like bottled water, beer and soda, in bottles or cans. There are settings for packaging 6, 9, 12, 15, 18, 20, or 24 bottles or cans per pack. It features fully automatic feeding, film wraping, sealing, cutting and feeding into your shrink packaging tunnel. Technical Features: Film feeding is sensor controlled to minimize waste Electronic PLC controls for consistant operation and easy changes and adjustments Packs 2, 3 or 4 rows of containers, with or without trays Special sealing cutter gives a perfect sealing line without sticking Feeding conveyor can be installed on either side Specifications: Machine Dimensions (mm): 1360 x 2120 x 1900 Maximum Package Size (mm): 500 x 300 x 330 Sealing Size (WxH mm): 700 x 330 Sealing Temperature: 0 to 200 degree Packing Speed (pcs/min): 12 to 14
Covered welding electrode Brand : weldon e-6013 All position/general purpose Classifications Is 814 er 4211 Aws : e-6013 Characteristics Weldon e 6013 is a medium coated rutile type all position general purpose mid steel electrode. It gives a quite and stable arc, steady fusion rate, least spatter and smooth weld bead with radiographic quality. Easy removal of slag and excellent weld quality facilitate multi pass welding Applications * suitable for all types of welding structural steel works like column, trusses, grills, bus & truck body building and plant equipments.Suitable for welding ship hult, tanks and vessels, steel frames, steel furniture, steel structurals, etc. * it is recommended in applicants such as , bogies under frames of railway carriages, wagons, boilers, pressure vessels, general engineering constructions, pipe welding, ship building, truck, bus frames and bodies etc. * suitable for all types of mild steel structurals, plant machinery pipes, dredgers & trailerÆs etc. Chemical composition of all weld metal Element c mn si s p % (max) 0.04-0.12 0.40-0.620 0.15-0.40 0.03(max) 0.03(max) Mechanical properties of all weld metal Uts (n/mm2) ys (n/mm2) elongation l=5d % cvn impact at 0¦c 420-540 350 min 22(min) 50(min) Note: single values shown above are maximum Welding current and packing data : dc¦ / ac 50 v Dia (mm) 2.5 x 350 3.15 x 350 4 x 450 Current (a) 60-90 100-140 140-190 Dia (mm) 135 90 60 Dia (mm) 8 8 8
Leading advantage Pass-through scanning: Passage scanning of passenger vehicles allows passengers and drivers to stay in the vehicle during the scanning process.control by the driver,no need extra transport. Small occupation of land: The BG-XCJ500 has a small occupation of land and does not require additional base construction. Dual-energy imaging: The BG-XCJ500 performs brake material identification and can distinguish organic, inorganic and hard-to-penetrate metal objects. can helps operators quickly identify all kinds of dangerous goods. Radiation safety: BG-XCJ500 can ensure the radiation safety of drivers and passengers (according to ANSI 43.17 international standards), while the camera equipped with the system can identify the surrounding environment and avoid scanning people outside the security screening target. Optional features: automatic car identification, vehicle detection system. Technical indicators: specification Channel size: 3 (wide) * 3 (high) meters Scanning speed: 5~10 kilometers per hour Typical throughput: 100 vehicles/hour Penetration: typical 45mm steel, 25mm steel for application Wire resolution : Diameter 1.2mm copper wire Absorbed dose: less than 0.2μsv single scan Fenced dose: Less than 0.5μsv in public area Meets IAEA standards Power Consumption: Max 2KVA Operator Station: 24-inch Single Console X-ray generator (dual energy) X ray generator: 200kv Beam Direction: Side Illumination Operating environment Operating temperature/humidity: 5°C~40°C/0%~90%(humidity) Storage temperature/humidity: -23°C~60°C/10%~90%(humidity) Power requirements: 220VAC (±10%) 50±3Hz (optional: 100VAC, 110VAC, 120VAC, 200VAC) software Operator protection :password login.; vehicle information list, data query, user management, real-time curve, playback, etc. Image function: color / black and white, increase, over increase, reverse color, organic removal / inorganic removal, brightening / dimming, zoom in / zoom out; Real-time video, real-time capture (custom); Organic&inorganic color image display;
Sharingtek Sh-fs150 Optic Fiber Fusion Splicer Descriptions Digital Fusion Splicer With Automatic Focus Function 5.6 Inch Tft Color Lcd Monitor With Clear Digital Image Display Usb & Vga Interface Software Upgrade Via Usb Interface Specifications Model, Sh-fs150 Applicable Fibers, Sm (itu-t G.652), Mm (itu-t G.651), Ds (itu-t G.653), Nzds (itu-t G.655) Fiber Cleaved Length, 10 ~16mm (coating Diameter