The TA Style centralized Elevators are used for tubing, casing and drill collars. These elevators are balanced for easy handling with safety lock and latch and guarded operating handles. Sizes range from 35 to 150 ton and cover all size tubular from 1.05inch to 10 3/4 inch, this elevator is made according to API 8C.
Integral Fittings including tees, crosses, elbows and crossovers, widely used for connection units in hard plumbing applications. We offer a variety of high pressure integral union configurations and pressure ratings in forged Integral Fittings. Our products are manufactured from forged alloy steel. Our Integral Fittings are great for applications where an intersecting flow is needed. We could provide these with carious end connections, and meet the demand of standard or sour gas service.
Description: Diesel generator sets, diesel generators are the combination of diesel engines and generators that have generated electricity, using diesel as fuel. In oil drilling, the most used is the 12V190 unit of CNPC. There are several main components: 1. Crank and connecting rod system, fuel supply system, lubricating system, cooling system, starting system, block assembly, etc.
Description: Reverse circulation junk magnet in petroleum and geology exploration is used for fishing of small fallen objects in the downhole. With some of advantages such as simple structure easy to operate, reliable performance, small size and weight, it is equipped with permanent magnet to attract small objects such as teeth wheel, palm, tong teeth and tool so that small objects in downhole are fished and the well bottom is cleaned up.
Description: Integral Fittings including tees, crosses, elbows and crossovers, widely used for connection units in hard plumbing applications. We offer a variety of high pressure integral union configurations and pressure ratings in forged Integral Fittings. Our products are manufactured from forged alloy steel. Our Integral Fittings are great for applications where an intersecting flow is needed. We could provide these with carious end connections, and meet the demand of standard or sour gas service.
NB1300 Drilling mud pump is Triplex single action piston pump, Design characteristics is an optimization parameter, increased the stroke properly, lowered the speed reasonably, improved the suction capability of the pump, prolonged the service life of wearing parts The pump used for oil-field and other industrial and mining establishments; Used for the drill, well work over and transport the liquid media;Mainly installed on 25-45 rig.The series pump produces according to SY5138 of the petroleum industry standard strictly, and carry through factory's experiment according to the standard.
Description: Â Junk Basket is a fishing tool which use the drilling fluid partly reverse in the bottom hole, to latch small junk in the basket. It is used for fishing all types of small junk, objects in well bores, such as bit cones, cutting blades and hand tools, etc. There are two types:Â ITCO Junk Basket and Reserve Circulation Junk Basket.
Description: During drilling process, Junk sub is applied mainly for fishing of shivers and fallen objects such as carbide tooth, drill bit and bearing which cannot be carried out of hole by conventional fluid circulation, It possesses important functions to keep hole cleaning, incr
Integral Fittings including tees, crosses, elbows and crossovers, widely used for connection units in hard plumbing applications. We offer a variety of high pressure integral union configurations and pressure ratings in forged Integral Fittings. Our products are manufactured from forged alloy steel. Our Integral Fittings are great for applications where an intersecting flow is needed. We could provide these with carious end connections, and meet the demand of standard or sour gas service.
Tubing head is a spool with flange top, flanged bottom and two side outlets. It also can be called tubing spool. Top flange is equipped with lock screws to fix tubing hanger. Tubing head is installed on top of casing head, which consists of body housing and tubing hanger. It can hang tubing string and seal the annular space between tubing and production casing. Our company can manufacturer tubing head with standard structure, which includes tubing hanger installed on the cone of body housing. Tubing hanger can be tapped with BPV thread as per request. Specifications: Working Pressure: 2000 psi~15000 psi (14 Mpa ~105 Mpa) Working Medium: crude oil, natural, mud Temperature Ratings: -46~121 (LU) Material Class: AA~HH Product specification levels: PSL1~PSL4 Performance levels: PR1~PR2
Description: Casing Head Assembly is the adapter between the first casing string and either the BOP stack or the wellhead. This adapter may be threaded or welded onto the casing, and may have a flanged or clamped connection to match the BOP stack or wellhead. 5. Lockdown screws in the top flange. Specifications: Type: Thread type, slip type, welded type Connected Casing O.D.: 7-5/8 ~ 13-3/8 in (193.7 ~ 339.7 mm) Hanger Casing O.D.: 4-1/2 ~ 9-5/8 in (114.3 ~ 244.5 mm) Working Pressure: 2000 ~ 20000 psi (14 ~ 140 MPa) Vertical Bore: 178 ~ 12-1/2 in (178 ~ 318 mm)
Features: 1. Integral Pup Joint could be used in high pressure discharge line, input line, temporary flow line, well testing and other transmission lines. 2. It can meet the demand of CO2, H2S and other sour gas operating environment. 3. Common material of Integral Flow Line Pipe is alloy steel, ANSI 4135, 4130, 35CrMo. 4. We can provide standard length and custom length according to your working condition. Specifications: Rated Working Pressure: 69 ~ 138 MPa (10000 ~ 20000 psi) Nominal Size: 1 ~ 4 in Service: Standard, Sour Gas Application: Fracturing, Cementing, Acidizing, Testing Lines
Features: 1.Provided with weak nitrile rubber sealing ring and used for sealing and protecting combination of union steel pairs. 2.Recommended for connection of manifolds and pipe lines, vehicle-mounted system and mud transportation and also can be used as non-pressure seal union. 3.Suitable for air, water, oil and gas service. 4.Made of high quality steel by forging and finishing cut.5.Adopts some end connections of pipeline thread, tubing thread, butt-weld.
Specification Size range: 8 1/2"~26" Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining Heat treatment: Normalized / Annealed / Quenched / Tempered Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000
Features: 1.Manufactured from 4145M or 4140HT alloy steel. 2.All lifting subs are complied with API standard. 3.A lift sub enables the safe, effective and efficient handling of straight OD tubular such as drill collars, shock tools, directional equipment jars, and other tools using the drill pipe elevators. 4.Lift subs are simply screwed to the top of the tool and feature an elevator groove.
Features: 1.The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling. 2.Directional crossing operation is widely used in unexcavated project. 3.Small torque force can be applied to hole opening with drilling machine. 4.Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes. 5.Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
Features: 1.API 7-1 Standard connection 2.Tricone bit is suitable for any rock formation. 3.Tricone bit is versatile and can handle changing formations. 4.PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP. 5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
Features: 1.Increased rate of penetration. 2.Better hole deviation control. 3.Reduction in drill string failure rate. 4.Reduction in wear and tear of the swivel, Kelly, and rotary drives. 5.Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 6.Big torque, high effective, wide flow rate range, running stable and long using time. 7.API Spec. Standard
Features: 1. Simple structure 2. Easy to operate 3. Reliable performance 4. Small size and weight Specifications: Model O.D/in Thread Conn. Attracted Weight (kg/cm2) Temperature In well Hole Size CLF89 3-1/2 NC26 9.8 210 95 ~ 110 CLF100 3-8/9 NC26 9.8 210 110 ~ 135 CLF125 4-8/9 NC38 9.8 210 135 ~ 165 CLF140 5-1/2 NC38 8.5 210 150 ~ 175 CLF146 5-3/4 NC38 8.5 210 160 ~ 185 CLF150 5-8/9 NC38 8.5 210 160 ~ 185 CLF175 6-8/9 NC50 7.9 210 185 ~ 210 CLF178 7 NC50 7.8 210 185 ~ 210 CLF190 7-1/2 NC50 7.8 210 200 ~ 225 CLF200 7-7/8 NC50 7.6 210 210 ~ 235 CLF203 8 NC50 7.6 210 215 ~ 240 CLF225 8-6/7 6-5/8 REG 7.5 210 235 ~ 270 CLF254 10 6-5/8 REG 7.0 210 265 ~ 311 CLF265 10-3/7 6-5/8 REG 6.9 210 275 ~ 330 CLF292 11-1/2 6-5/8 REG 6.9 210 300 ~ 442 CLF317 12-1/2 7-5/8 REG 6.9 210 340 ~ 375 CLF356 14 7-5/8 REG 6.9 210 444.5
Features: 1. Lake Petro offers both hinged and slip-on style of stop collars in all sizes. 2. The force of hinged stop collar can hold up to 15,000 lb. 3. The force of slip-on set-screw stop collar can hold up to 20,000 lb. 4. We can supply stop collar in all sizes. Specifications: Type: slip-on, hinged spiral nail, hinged bolted, hinged set screw Casing size O.D.: 4-1/2 ~ 20 in (114~ 508 mm) Stop collar size O.D.: 131 ~ 540 mm Stop collar height: 50 ~ 210 mm