The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or Alibaba online order payment. * Transportion: Express, Sea shipping, Railway etc.
The ULTEM PEI resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance. * ULTEM PEI Grades Available: 139 * Available in: Europe, Asia, AmericasPEI SABIC ULTEM: 1000/1000E/1000F/1000P/1000R/1010/1010F/1010M/1010P/1010R/1100/1100F/1285/6202/9011/9075/9085 MedicalGrade: HU1000/HU1000E/HU1004/HU1010/HU1100/HU1110/HU2100/HU2110/HU2200/HU2210/HU2300/HU2310 PEI+10% Glass fiber filled: SABIC ULTEM 2100 / 2100F / 2100R / 2110 / 2100EPR / 2110R PEI+20% Glass fiber filled: SABIC ULTEM 2200 / 2200F / 2200R / 2210 / 2210R / 2210EPR / 2212R PEI+30% Glass fiber filled: SABIC ULTEM 2300 / 2300F / 2300R / 2310 / 2310R / 2310EPR / 2312R / 2310F / 2312 / 2312EPR PEI+40% Glass fiber filled: SABIC ULTEM 2400 / 2410 / 2410R / 2410EPR PEI+45% Glass fiber and mineral filled: SABIC ULTEM 3452 PEI+PTFE filled: SABIC ULTEM 4000/4001/4002/4211 PEI Transparent MD130/131/131A/147 PEI PW 1000/2100/2200/2210/2300/2400 PEI JD 7903/7904 PEI CRS5001/5011/5011R/5111/5201/5201R/5211R/5301/5311 PEI AUT195/195M/200/200M/210/230 PEI AR9100/9110/9200/9300 PEI ATX200/200F/200R/3562R ...... * Material: PEI, * Package: 25kgs per bag, 40 bags per pallet, * Leadtime 3-7 working days after confirm. * Payment ways: T/T or online order payment. * Transportion: Express, Sea shipping, Railway etc.
PERSONAL AIR SAMPLER INTRODUCTION THERE IS A CHANCE THAT WORKERS AT MANY INDUSTRIAL AND CONSTRUCTION SITES WILL BE EXPOSED TO HAZARDOUS DUST, VAPOURS, AND GASES. SINCE INHALATION IS TYPICALLY THE MOST MAJOR ROUTE OF ENTRY INTO THE BODY, IT IS CRUCIAL TO PAY CLOSE ATTENTION TO THE AIR THEY ARE BREATHING. IN GENERAL, WE USE A SAMPLE PUMP TO EXTRACT A KNOWN VOLUME OF AIR THROUGH AN APPROPRIATE SAMPLING MEDIA. FILTER PAPER OR OTHER SUITABLE SOLID MEDIUM WOULD BE USED FOR PARTICLES AND FUMES, AND A SORBENT TUBE, OR PERHAPS AN IMPINGER OR BUBBLER, WOULD BE USED FOR GASES AND VAPOURS. WITH THE SAMPLER SITUATED IN THE BREATHING ZONE, A TYPICAL SAMPLING TRAIN FOR PERSONAL MONITORING WOULD RESEMBLE THIS; Gas sampling bags, like Tedlar bags, are used for collecting samples of gases. Moreover, background exposure can be measured using passive or diffuse sampling methods. They are sealed badges that are sampled, worn on the individual for the specified amount of time, sealed, and then sent off for analysis. To enable hands-free sampling of inhalable gaseous pollutants and particulate matter in the air actually breathed by the person at work, Personal Air Sample is a battery-operated tiny air sampler that may be fastened on to a person. Uses include: monitoring fugitive gas emissions in the workplace, workplace air quality, and workplace monitoring. They are also used in places of employment for businesses in the chemical, paint, cement, sugar, and other industries. Features of the physical design include a holder for the sampling medium, a suction pump, a flow measurement device, a flow controller, and a battery for each personal air sampler. For sampling of dust or particles, a suitable filter that has been placed in a filter holder serves as the sampling medium. An adsorption tube that is filled with pollutant-specific adsorbents like activated charcoal, tenax GC, etc. serves as the medium for sampling gases and vapours. The filter or the adsorption tube must be the only one of the two media being utilised at once. The suction needed to draw air through the sampling media is provided by a low power diaphragm type suction pump. A large capacity rechargeable Li-ion battery powers it. A tiny rotameter that has been carefully built can measure flow.A ball valve, a needle valve, or an electronic circuit can be used to control flow. A battery-operated model with a rechargeable battery is one of its key features. Used to monitor the air quality in workplaces or on shop floors. Small and Lightweight, weighing under 500 grammes To assess TLV exposure, the filter holder or adsorbing tube can be held at the level of inhaling. May be worn by the user Model that is lightweight, convenient, and reasonably priced.
ECTFE Coating Grade Resin 1.Product introduction As a resin, ethylene chlorotrifluoroethylene is a very pure fluorine copolymer, which not only has excellent mechanical properties, good weather resistance and chemical resistance common to fluorine-containing resins, but also has excellent light transmittance and hardly absorbs visible light and ultraviolet light. In addition, because it contains chlorine atoms, the moisture permeability of all fluorine resins is relatively low, which can prevent many liquids and gases from penetrating, and is beneficial to the anticorrosion and rust prevention of the protected substrate. 2.Technical Parameter Item Test Method Unit Value Density ASTM D792 g/cm3 1.66~1.68 Grain Size ASTM D1921 um 40~80 Melting Point ASTM D3418 �ºC 215~225 Melt Index ASTM D1238 g/10min (275�ºC,2.16kg) 8~15 3.Mark, Packing, Storage & Transportation 3.1 Mark The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc. 3.2 Package This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (20 �± 0.2) kg per barrel. Each barrel shall be provided with a product certificate, including: company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the Demander shall negotiate separately. 3.3 Storage This product should be stored in a clean, cool and dry place to prevent rain, sunshine, moisture, dust and other impurities. 3.4 Transportation This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation. 4.Main Application 4.1 ECTFE coating grade resin is white powder, which has excellent chemical corrosion resistance, excellent barrier performance to various corrosive gases and excellent high and low temperature resistance. 4.2 The electrostatic spraying method can be used for coating protection of reactors, pipelines, storage and irrigation, mixers and other containers in the chemical and semiconductor fields, thus delaying the service life of the equipment.
ASTM Ss 201 304 309S 310 316 904L 410 420 430 2205 2507 Welded Steel Pipe Seamless Stee Pipe Cold Hot Rolled Round Pipe Stainless Steel Pipe for Decoration Standards:ASTM, GB, JIS, DIN, EN, AISI,ASTM A312 / ASME SA312, GB/T 13296,GB/T 14975,GB/T 14976 Materials:Stainless Steel/Galvanized/Carbon/Aluminum/Alloy Steel/Cooper 200 Series:201, 202, 202cu, 204cu 300 Series:301,303,304,304/L/H, 305,314, 316/L/H/Ti, 317, 317L, 321, 347,347H, 309, 309S, 310S, 400 Series:409, 410, 416, 420, 430, 431, 440c, 441, 444, 446 Duplex Steel:904L, 2205(UNS S31803/S32205), 2507(UNS S32750), 2101, 2520, 2304, 254smo, 253mA,UNS S32760, Special:2507, 316Ti, 316LN, 347H, 317L, 310S, 253MA, RA330, 725LN, 724L etc. Size:10.3*1-2.41,13.7*2.24-3.02,17.1*2.31-3.2....1219*9.53-12.7 Length:1.0-12m or as customer's requst,fixed length random, Outer Diameter: Stainless Steel  Seamless Pipe:4mm-914.4mm Stainless Steel  Welded Pipe:single slit(8mm-630mm); girth(630mm-3000mm), Thickness: Stainless Steel Seamless Pipe:0.6mm - 60mm Stainless Steel Welded Pipe:single slit(0.5mm-25mm);girth(3mm-45mm) Manufacturing Shapes: Seamless Pipe:Hydraulic, Round, Square, Hex, Honed,Rectangular,Oval Welded Pipe:Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) Surface Finish:No.1, No.4, No.8 Mirror Finish, 2B,Finish as per customer Requirements Surface:Mirror Polished/Polishing/Annealing/Pickling/Bright/Black Packing: Pipe/Tube/Bar:Plastic bags for each piece then packed in seaworthy wooden cases 1. each tube is packed with pipe end caps and plastic bag individually, then packed into woven belt or wooden box. 2. bundle packing. 3. as customer's requirement. Plate/Coil/Strip:Standard seaworthy packing(plastic&wooden) or according to the customer's requests
Seaweed" is the common name for countless species of marine plants and algae that grow in the ocean as well as in rivers, lakes, and other water bodies. Seaweeds are used in many maritime countries as a source of food, for industrial applications and as a fertiliser. The major utilisation of these plants as food is in Asia, particularly Japan, Korea and China, where seaweed cultivation has become a major industry. The present uses of seaweeds are as human foods, cosmetics, fertilisers, and for the extraction of industrial gums and chemicals. They have the potential to be used as a source of long- and short-chain chemicals with medicinal and industrial uses. Gracilaria Seaweed Gracilaria is a genus of red algae notable for its economic importance as an agarophyte, as well as its use as a food for humans and various species of shellfish. Various species within the genus are cultivated among Asia, South America, Africa and Oceania. Gracilaria is used as a food in Japanese, Hawaiian, and Filipino cuisine. In Japanese cuisine, it is called ogonori or ogo. In thePhilippines, it is called gulaman and used to make gelatin. In Jamaica, it is known as Irish moss. Main uses : The primary use of Gracilaria is as a raw material for the production of edible agar, of basic quality. This agar serves as a solidifying agent in the food industry, andmay also be eaten directly. The secondary uses of Gracilaria are as a fresh or dried vegetable, as a component in the cosmetic industry in shampoos, creams, soaps and sunscreens, as well as providing a source for nutraceutical activities , insofar as it is antimicrobial, anti-inflammatory, active against gastrointestinal disease, antiviral, anticancer, anti-pain, etc. Gracilaria is also used for water remediation in integrative mariculture, wherein Gracilaria absorbs the fish and invertebrate excretions, and enables water recycling in fish cultivation. Gracilaria is also consumed as a food additive in fish culture by utilizing its biological activities, and as fertilizer in agriculture. Nutritional value: Gracilaria contains non-digested (agar) and digested (starch) nutritional fibers (up to 50% of dry material), protein with well balanced amino acid composition (up to 20% of dry material), low fat (3%), and other minerals (including magnesium, calcium, potassium, iron, iodine), vitamins (including A, C and B12), and antioxidants (all together about 30% of dry material). Specifications - Product name : Dried gracilaria seaweed - Origin : Indonesia - Moisture : 13% -16% as request - Impurities: 1% -3% as request - Type: whole Packaging Details: - Packing : 40-60kgs/ PE bag /PP bag or as customer request, 16-17MTS/20'Feet, 25-26MTS/40'Fee. - Minimum quality : 1 container 40 feet . - Payment method : 100 % L/C at sign or T/T (50:50) - Storages : dry place
PP Isolation Gown, Isolation Gown, Disposable Gown Product information: Material: PP Standard size: 115 x 127cm, 115 x 136cm, 115 x 145cm, 130 x 150cm(As requested) Gram weight: 16-50GSM Color: White/blue/green/navy, etc. Packing: 1pc/bag, 50 pcs in one carton Certificate: CE&ISO13485 Material PP Standard size 115 x 127cm, 115 x 136cm, 115 x 145cm, 130 x 150cm(As requested) Gram weight 16-50GSM Color White/blue/green/navy, etc. Packing 1pc/bag, 50 pcs in one carton Certificate CE&ISO13485 Pattern: 1. Elastic/knitted cuffs 2. With sterilized and non-sterilized 3. Round-neck & V-neck & Pockets are available 4. Sleeves Long or Short could be choose 5. Ties separately on Neck and Waist Features: 1. Good tensile strength, Non-Irritating to skin, Odorless; 2. Lightweight, soft, breathable; 3. Impervious and water-proof; 4. Can penetrate the air, water vapor, it can be water-based liquids and aerosols excluded; 5. Designed to allow comfort during long duration surgery; 6. High quality, low price; ISO 13485, CE certificated. 7. Application: It is widely used in hospitals, chemical, drug makers, enviromental sanitation, etc. 8. Available in different weight, size, color and packing as requested; 9. Can be made according to customer's samples and specifications. Other surgical gown we also can offer: PP surgical gown/SMS surgical gown/PE surgical gown/reinforced SMS surgical gown with sterile MEDDOCARE also can provide you: 1. Face mask(1-3ply), many colors, tie on or with earloop; 2. Cap(such as bouffant cap/clip cap/mob cap/worker cap, etc. ) 3. Lab Coat(SBPP/PP+PE/SMS) 4. Coverall(SBPP/PP+PE/SMS/SF) 5. Patient Gown(PP/SMS) 6. Apron(PE) 7. Sauna coat/kimono(PP) 8. Sleeves(PP/PE) 9. Gloves(HDPE/LDPE) 10. Shoe cover(PP/CPE/PP+CPE/PE) 11. Boot cover(SBPP/CPE/SMS, etc. ) 12. Others(such as bed cover/Gauze roll/Mattress cover, etc. )
Water repellent fabric Drotex is a professional manufacturer of all kinds of safety workwear fabrics since 1998. We hope to build a long-term business relationship with customers from all over the world in the future. Water repellent fabric 1.Product introduction of the Water repellent fabric The Water repellent fabric has a physical property that is seemingly repelled from a mass of water.It is usually used in protective clothing industry. It has wide applications,such as oil gas company,roadway safety,chemical industry,etc. 2.Product parameter (Specification) of the Water repellent fabric Product name Water repellent fabric Material Cotton,CVC or T/C(Cotton Polyester Blend) Weight As customers requirement Width 57/58" Structure Twill/Satin/Ripstop Color Black,navy,grey,light blue,etc Function Water repellent Usage Protective clothing Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN 13034,EN 343 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3.Product Feature And Application of the Water repellent fabric If a fabric is labeled as "water repellent",it means that it is hydrophobic.This entails that the product actually has physical properties that,as the label suggests,repels water on contact.Water-repellent products are generally built with special materials and techniques. Using the Water repellent fabric technology, processed on the surface of fabric like the effect of leaf rolling the hydrophobic function, also has oil-proof feature, and by the treated fabric remained the original features, treatment of clothing is more easy to clean. 4. Production details of Drotexs Water repellent fabric 5. Product Qualification of the Water repellent fabric Water repellent fabric can meet AATCC 22,ISO 4920,EN 13034,EN 343. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the Water repellent fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers. 7. FAQ Which kind of water repellent fabric is suitable to me ? Water repellent non-breathable suit for those wanting complete water protection however may become uncomfortable during wearing.
chemical resistant fabric Xinxiang Zhuocheng Special Textile Co., Ltd is a professional manufacturer of all kinds of protective workwear fabrics since 1998. We hope to build a long-term business relationship with customers from all over the world in the future. chemical resistant fabric 1.Product introduction of the chemical resistant fabric The chemical resistant fabric is mainly used for making protective workwear. It has wide applications,such as oil gas company,roadway safety,chemical industry,etc. 2.Product parameter (Specification) of the chemical resistant fabric Product name chemical resistant fabric Material Cotton,CVC or T/C(Cotton Polyester Blend) Weight As customers requirement Width 57/58" Structure Twill/Satin/Ripstop Color Black,navy,grey,light blue,etc Function Chemical resistant Usage Protective workwear Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN 13034,EN 343 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3. Product Feature And Application of the chemical resistant fabric The chemical resistant fabric is one of our major products.It is finishing to be chemical resistant.At the same time this fabric has good air permission.It can pass the performance requirements for protective clothing safety and sanitation standards. Using the chemical resistant technology, processed on the surface of fabric like the effect of leaf rolling the hydrophobic function, also has oil-proof feature, and by the treated fabric remained the original features, treatment of clothing is more easy to clean. 4. Production details of Drotexs chemical resistant fabric 5. Product Qualification of the chemical resistant fabric chemical resistant fabric can meet AATCC 22,ISO 4920,EN 13034,EN 343. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the chemical resistant fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers. 7. FAQ Will non-treated 100% cotton and other natural fibers help protect against possible burn injury? Non-treated cotton and wool are flammable fibers. If exposed to electric arcs and flash fires, these materials will continue to burn causing possible severe injury and death.
anti static fabric Xinxiang Zhuocheng Special Textile Co., Ltd is a professional manufacturer of all kinds of protective workwear fabrics since 1998. We hope to build a long-term business relationship with customers from all over the world in the future. anti static fabric 1.Product introduction of the anti static fabric Permanent anti static fabrics for protection from electrostatic discharge risks (EN 1149), offering diversity in corporate designs and the possibility of incorporating multiple technical finishes, to adjust the fabric for each specific application. Fabrics produced with different compositions of polyester-cotton. 2.Product parameter (Specification) of the anti static fabric Product name anti static fabric Material Cotton,CVC or T/C(Cotton Polyester Blend) Weight As customers requirement Width 57/58" Structure Twill/Satin/Ripstop Color Black,navy,grey,light blue,etc Function Anti static Usage Protective workwear Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN 13034,EN 343 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3.Product Feature And Application of the anti static fabric Anti-static workwear is a kind of protective clothes that are necessary not only in inflammable and explosive places but also in such industries are electronics,food precision instrument, petroleum and chemistry. This kind of cloth, blended by conductive carbon or metal fibre with cotton or polycotton fibre whether embedded or blended, is a kind of anti-static cloth that are melt into the interior part of the fabric. therefore, this product has permanent anti-static property. Though washed over 100 times, its conductivity can still meet the requirements of A class according to EN1149-3 Anti-Static Work Clothing 4. Production details of Drotexs anti static fabric 5. Product Qualification of the anti static fabric anti static fabric can meet EN 1149-3/5. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the anti static fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers.
aramid viscose fire retardant fabric Specialized in all kinds of protective workwear fabrics since 1998. We hope to establish a business relationship with customers from all over the world. aramid viscose fire retardant fabric 1.Product introduction of the aramid viscose fire retardant fabric The aramid viscose fire retardant fabric has wide applications,such as 2.Product parameter (Specification) of the aramid viscose fire retardant fabric Product name aramid viscose fire retardant fabric Material 50% meta-aramid 50% viscose Weight 200gsm Width 57/58" Structure Twill/Plain/Ripstop Color Black,navy,grey,light blue,etc Function flame retardant,antistatic,arc resistant,etc Usage Safety clothing Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN ISO 11611,EN ISO 11612 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3.Product Feature And Application of the aramid viscose fire retardant fabric permanent flame retardant,no melt,no drop,anti-static,arc resistant,alkali resistant,high tear and tensile strength,soft and comfort,fit for FR protective garments. 4. Production details of the aramid viscose fire retardant fabric 5. Product Qualification of the aramid viscose fire retardant fabric Aramid viscose fire retardant fabric can meet EN ISO 11611 ,EN ISO 11612. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the aramid viscose fire retardant fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers.
SKU: QLF02Product DescriptionInflatable Sunny Bounce CastleIf you love If you like chasing games ,you must take this funny and nice game equipment for kidsâ?? backyard party and outdoor events. FeaturesHeavy duty commercial grade qualityCustom (color, size, logo and design)SpecificationsMaterial18 oz / 0.55 mm PVC tarpaulinSizecustom sizeMOQ1 pieceWarranty2-3 yearsPackingPVC tarpaulin bags for inflatable, carton for blowerWhatâ??s Includedrepair kit and glue, durable packing bag. (blower is not included, feel free to buy from us at a discount price)CertificatesCE / UL / SGS / EN14960Pictures   CertificatesIncoterm: We accept EXW, FOB, C&F, CIF. Production time: Normally 7~15 days. Shipping time: 15 days â?? 35 days depends on seaport.FAQ1.How do you start the order?  We will start your order after receiving the down payment which is 50% of total payment. When order finished, we will email you the digital photo for your confirmation. We will send the goods to you after receiving the balance payment.  If the order is urgent, you'd better pay 100% in advance. 2.Producing time?  Our regular producing time for 1pcs inflatable games is 6-15 days, excluding air transit time, from the date of confirmation. However, it can be +/- depending on the design and the dimensions. 3.What about Delivery?  Shipping methods: Shipping by sea, by air, by courier (DHL/UPS/TNT/FEDEX), is available for customers. And the freight charge can be prepaid or collected. The shipping costs may be about USD200.00 for 1pcs of games. If you order more, the shipping cost for 1pcs will be lower than USD200.00. Air charge is different for different country 4). How long is the dilevery?by courier / by air: about 3~5 working days after goods on plane.by sea: about 25 working days after goods on board. 5). What is the guarantee period?Advertising products like tent,arch, models are warranted for 1 year, games like slide, bouncer, combo have 2 years and the blowers& air pump with 1 year 6. How to visit your factory?Before customers'visiting to our factory or company, we can help with hotel reservation, picking up and otherIf you have any questions, please contact us. Weâ??d like to hear from you.
