The Manual tongs are necessary tools applied to make up and break out pipes. By changing the lug jaws and latch steps the manual tongs can hold different size of tongs.They are designed and manufactured according to API 7K for well drilling equipment. The B type manual tongs are includes B type, SB type, and DB type, SDD,LF, Type C, workover tongs, WWC, WWB,AAX, Casing tong, Extended casing tons.
Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type.
Integral Pup Joints are high pressure fluid control situation. They are widely used in acidic operating environment in the high pressure pipelines. Integral Pup Joints are made from high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast and reliable. Multiple seal design and high precision is to ensure the sealing performance of the product.
Hammer Unions are designed as heavy duty, high pressure flow line connectors, which is commonly applied to chemical plants, on marine dredging vessels, in strip mines and in the oil industry. The color-coding system on Hammer Unions represents the different configurations and pressure ratings.
1.Provided with weak nitrile rubber sealing ring and used for sealing and protecting combination of union steel pairs. 2.Recommended for connection of manifolds and pipe lines, vehicle-mounted system and mud transportation and also can be used as non-pressure seal union. 3.Suitable for air, water, oil and gas service. 4.Made of high quality steel by forging and finishing cut.5.Adopts some end connections of pipeline thread, tubing thread, butt-weld.
1.Increased rate of penetration. 2.Better hole deviation control. 3.Reduction in drill string failure rate. 4.Reduction in wear and tear of the swivel, Kelly, and rotary drives. 5.Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 6.Big torque, high effective, wide flow rate range, running stable and long using time. 7.API Spec. Standard
1.API 7-1 Standard connection 2.Tricone bit is suitable for any rock formation. 3.Tricone bit is versatile and can handle changing formations. 4.PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP. 5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
1. The drill rods comply with the provisions of API SPEC 5D & API SPEC7. 2. The grade of steel are determined according to the requirements of Group 1 & Group 3 of API SPEC 5D. 3. Drill pipe joints at the same level comply with the provisions under the Standard API SPEC 7. 4. Standard pipe size range: 2-3/8â??~6-5/8â?? 5. Hardbanding: The wear rate is less than 6% of that of bare tool joint, which can prolong 3 times of the tool joint service life. Good property of friction-reduction, which can reduce the casing wear to the least, and its wear to casing is less than 11% of that of bare tool joint. Reduce the torque of drilling string. 6. Widely used for oil, gas, water well and geothermal fields in Turkey, Poland, Japan, Singapore etc.
Kellys are manufactured with one of two drive configurations, square or hexagonal. Square kellys are furnished as forged or machined in the drive section. Hexagonal or fully machined square kellys are machined from full length quenched and tempered round bars. Square Kelly and hexagonal kellys are fabricated as per requirements of customers. The kellys are made of AISI 4142H-4145H forged or rolled alloy structural steel. Quenching plus tempering thermal treatment will be conducted over the whole length. Its Brinell hardness can reach 285-341 on the basis of such thermal treatment. Charpy impact energy: >or =54J. The formulated process can ensure that the misalignment of the hole reaches the standard wall thickness. Kelly bars are manufactured according to API-7-1 Spec.
1. Hardness range of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature. 2. Connections as phosphate coated father machining to protect the threads from corrosive elements and to prevent galling upon initial make -up. Thread roots are cold rolled on API and H0-90 connections. 3. Pressed steel thread protectors are supplied to all drill collar that are equipped with standard connections. 4. Manufactured strictly according to API standard. 5. Widely used in oil, gas, HDD and geothermal field.
Specification Size range: 8 1/2"~26" Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining Heat treatment: Normalized / Annealed / Quenched / Tempered Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000
1.Manufactured from 4145M or 4140HT alloy steel. 2.All lifting subs are complied with API standard. 3.A lift sub enables the safe, effective and efficient handling of straight OD tubular such as drill collars, shock tools, directional equipment jars, and other tools using the drill pipe elevators. 4.Lift subs are simply screwed to the top of the tool and feature an elevator groove.
1.Made of 4145H alloy structural steel. 2.Production complies with the provisions under the Standard SY/T 5146-1997. Connector screws comply with the provisions of the Standard API SPEC 7-1. 3.The tube section has a larger diameter at mid length to protect the heavy weight drill pipe from wear. 4.Hardbanding and Internal Coating can be provided on customer request.
1.The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling. 2.Directional crossing operation is widely used in unexcavated project. 3.Small torque force can be applied to hole opening with drilling machine. 4.Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes. 5.Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
1.API standard drilling cross-over sub 2.BOX x BOX, BOX x PIN, PIN x PIN 3.Different API Standard connection type, e.g. NC, REG, FH, IF etc. 4.Apply to HDD, Geothermal, Gas, Oil and Water well drilling.
Description: Lake make High quality replacement shaker screens for MI Swaco Shale Shaker, Nov Shale Shaker, Brandt Shale Shaker with competitive price as well as global distribution.
Description: cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity.
Description: The Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.
Description: Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60�°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.
Description: A� rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the� drill string� to facilitate the process of drilling a� borehole.