Maximum DC voltage of the system 1000 1000 1000 1000 Maximum input current of each channel 20A 20A 20A 20A Maximum number of input channels 6 8 12 16 Maximum output switching current 20A/32A 125A 160A 200A Number of inverter MPPT N N N N Output path 1
Scope of application BWG optical grid-connected cabinet is an important part of centralized inverter and booster transformer or AC bus box and booster transformer. The incoming line of this photovoltaic grid-connected cabinet uses circuit breaker input or direct input, the output uses circuit breaker or load isolation switch, the bus is connected by electroplated or purified bus, and provides secondary anti-demand protection. The rated voltage of the system is AC690V. Indoor protection class IP40, outdoor 1P65: secondary measurement and control of the cable, the current is greater than 2.5mm; The electrical environment, the voltage is 1.5mm; The control is greater than 1.0mm ', the measurement current transformer is 0.5 current mutual inductance solution, and the measurement mutual inductance is 0.2S current mutual inductance path. We can also add related functions according to customer requirements. This product adopts professional electrical design and component selection, so that the internal structure of the cabinet is safe, simple, beautiful, convenient for on-site wiring and maintenance, and ensure the long-term stable work of the equipment.
XL-21 series low-voltage power distribution cabinet for AC 50Hz, rated voltage below 660V, 1000KVA transformer below the three-phase four-wire power system as hotels, hospitals, ports, and factories and mining enterprises distribution, power lighting, voltage 380V, capacity of 0.52-75kW motor electronic control device and lighting. It can also be used for other symbols of the power distribution box. The product has the characteristics of flexible circuit scheme, convenient combination, strong application, novel structure, etc. The shell protection grade can reach IP30.
GGJ capacitor cabinet adopts computer-aided design (CAD), the introduction of microcomputer control, the implementation of intelligent tracking compensation of reactive power, its reasonable structure, advanced technology, widely used in low-voltage power grid, improve the power factor, reduce reactive power loss, improve the quality of power supply, is a new generation of energy-saving products. It is specially used for reactive power compensation of capacitor 130-600KVA three-phase change voltage.
Product details Arc suppression and harmony cabinet, also known as (computer arc suppression and harmony line selection and overvoltage protection device), is used in the power industry for 3-35KV neutral point is not grounded, neutral point is grounded by arc suppression coil or neutral point is grounded by high resistance in the power system, can limit all kinds of overvoltage in the system, effectively improve the safety of system operation and reliability of power supply. At the same time, because the arc grounding overvoltage lasts for a long time, the energy easily exceeds the bearing capacity of the arrester, resulting in the explosion of the arrester. Moreover, the high amplitude overvoltage generated by arc grounding intensifies the cumulative damage or even breakdown of solid insulation such as cables.
Product introduction GKG series high voltage solid state soft start device (hereinafter referred to as soft start device /1-10KV mining general soft start cabinet) is a new concept of high voltage motor soft start installation, mainly suitable for squirrel cage asynchronous and synchronous motor start and stop control and protection. The device is composed of multiple thyristor series, which can meet different requirements of current and voltage. Products are widely used in rated voltage 3000-15000V power, building materials, chemical, metallurgical steel, paper and other industries. Can be very good with pumps, fans, compressors,Grinder, mixer, belt machine and other mechanical and electrical equipment supporting the use, is an excellent high voltage motor starting and protection equipment.
TBBX high voltage re active power local compensation device is suitable for small load change, need to compensate a single motor and other equipment that needs compensation, has been widely used in metallurgy, mining, building materials, petrochemical and water supply and drainage industries, can effectively improve the power factor of the power system, reduce the re active power loss of lines and equipment, improve the output of equipment, thereby saving electricity energy. Improve power supply quality. The ZRTBBX series reactive power local compensation device developed and produced by the division adopts advanced design concept and advanced production technology as well as sound quality assurance system and after-sales service system, so that the product has been continuously improved in technical content and quality.
TBBZ High voltage reactive power automatic compensation device: Applicable to 220KV, 110KV, 35KV substation 35KV, 10KV(6KV) bus automatic reactive power tracking compensation, mainly for 3~35KV three-phase power frequency AC power system load fluctuations, the use of centralized compensation still can not meet the system requirements, often cause overcompensate or undercompensate situation. The installed device can detect the reactive power required by the system in real time, and then compare with the set value, and carry out automatic intelligent switching operation, so that the reactive power of the system reaches dynamic balance, in order to improve the power factor of the system, stabilize the system voltage, reduce the loss, and save the cost of electricity.
Transportation, installation and maintenance Transportation The factory substation should be filled with 25#(or 45#) transformer oil as indicated by the oil level gauge in the tank. During transportation and loading and unloading, it shall not be inverted or turned over, shall not impact the parts, and shall not be strongly shaken Special attention should be paid to the lifting hook in the lifting hook of the fuel tank, and it should be lifted slowly to avoid damage to the paint on the surface of the substation by the wire rope, and even cause the center of gravity of the whole substation to shift, tilt, and fall. Install When the substation is installed on site, pay attention to the protection of the paint on the surface of the cabinet, do not allow the handle of the barometer, oil level meter, the thermometer, plug-in fuse and insulation sleeve element to bump, crack, etc., and the screws are not loose. Clean the dust and dirt outside the substation, inside the cabinet door and on the surface of the insulation sleeve. Check whether the name plate data and product certificate of the substation are consistent with the order, and check whether documents and spare parts are missing according to the packing list. The civil diagram of the inlet and outlet of the substation cable is shown in Figure 6. Maintenance The factory products have been strictly adjusted assembly, do not need to be disassembled during installation, so as not to affect the performance, maintenance is limited to the following situations: Sample analysis of transformer oil once a year; It is found that the oil level should be supplemented in time, and the brand of oi l is the same as that in the box: After the fuse is blown, the cause should be identified, and the specifications and models should be the same as the original specifications and models when replacing the melt core.
100 kWh-500kWh Outdoor All-in-one Energy Storage Cabinet ECE One-stop outdoor solar battery storage cabinet is a beautifully designed turnkey solution for energy storage system. The commercial solar battery storage system is loaded with cell modules, PCS, photovoltaic controller (MPPT) (optional), EMS management system, fire protection system, temperature control system and monitoring system. As a leading battery management system factory, ece energy ensures top-quality components and innovative design. The system configuration is modular, support multi-machine parallel, plug and play, easy to install and maintenance. The IP54 waterproof shell makes it perfect to adapt to a variety of indoor or outdoor industrial and commercial application scenarios, such as photovoltaic charging stations, industrial parks, farms, etc.
KOMATSU PC228US-3 2.9t 6000hours
We manufactured LED Batten Light in multi designs.
Rice Cooker Heating Plate: The Core of Efficient Cooking The heating plate is a critical component of a rice cooker, responsible for converting electrical energy into heat to cook rice and other grains. This plate is usually found at the base of the rice cooker, providing even heat distribution to ensure thorough and consistent cooking. Whether you're preparing simple white rice, brown rice, or more complex dishes like porridge, the heating plate plays a vital role in the applianceâ??s performance. What is a Rice Cooker Heating Plate? A rice cooker heating plate is a flat, circular or disc-shaped heating element made of metal (typically aluminum or copper) that sits at the bottom of the cooker. When electricity passes through the plate, it generates heat that cooks the rice in the pot placed above it. The heating plate works in conjunction with a thermal sensor or thermostat that monitors the temperature and adjusts the heating process for optimal results.
Booking Master offers an affordable, all-in-one solution for hotel management. This cloud-based software streamlines property management, making it easier and more efficient. As Indias leading property management software, Booking Master helps you save time by automating daily tasks. Focus more on guest satisfaction while improving overall performance. Upgrade with Booking Master and watch your business grow.
PV-NEHP01 Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:30A(With diode); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP68(in potting);Safety degree:II; Flame Class:UL94-V0;Ambient temperature range:-40 85 (IEC); Suitable cable cross sections:6mm2 (10AWG);Diode Number:Each 1PC; Upper limiting temperature:110 (IEC);Range of cable gland(mm):O.D.:6.0; Ribbons size(mm):Max.8(W) 0.2-0.5(T);Connection of bus ribbons:Soldering.
Hot water circulation pump with timer integrated. This pump makes sure hot water is always available at the tap without delay. Fully automatic
Diesel Generator Sets & Spares
These IP65 fittings are made for high wattage applications and can withstand harsh conditions. That’s why they are used as highbays as well as flood lights. For optimal heat management, they use a heat pipe technology with a copper core. To add to that, a Breather device ensures optimal performance by adjusting internal pressure of the fitting in humid conditions. All this innovation is packed in with American Cree LED’s and Japanese power driver components. These IP65 fittings are made for high wattage applications and can withstand harsh conditions.
Outdoors Illumination of buildings and structures not only accentuates its unique features but also sets the structure apart from its surroundings. LED Projection Lights and Wall Washers offer a perfect replacement with its lower power consumption, various Wattage, Lighting Angle and Color options. Combined with DMX control, Lighting desing options are various. An IP65 body makes it perfect for outdoor installations. Outdoors Illumination of buildings and structures not only accentuates its unique features but also sets the structure apart from its surroundings.
Aluminium Strip Lights are a fashionable and functional lighting option. Adaptable to various installations, they also prove to be an effective heat sink. They are available in varioius colours, profiles and dimming options. Please feel free to ask our support team how to include them in your new or existing lighting designs. Aluminium Strip Lights are a fashionable and functional lighting option. Available in White, Warm White, Red, Blue, Green, Orange, Purple, Pink and RGB.
