Old tire pyrolysis technology is a green technology that solves waste tire pollution to the environment. And can ease the energy crisis, in today's society, this is a very meaningful environmental protection industry. Tire pyrolysis oil is an end product extracted from the pyrolysis process and is often used to heat raw materials and generate electricity with heavy machinery. If the pyrolysis oil is subjected to a specialized pyrolysis oil distillation plant distillation, the extracted diesel oil can be used for diesel generators and light fuel oils. The main part of the entire pyrolysis system includes reactors, transmissions, catalysis rooms, cooling pipes, manifolds, heavy oil tanks, light oil tanks, condensers, oil-water separators, safety devices, vacuum systems, dust collection systems, etc. The main working principle of old tire refining equipment: By pyrolysis of the oil using a high-temperature distillation tire, the impurities in the oil are distilled off, and the filtered light oil vapor increases in heat, and impurities in the pyrolysis oil fall into the furnace. Light oil and gas passes through a multi-stage heating system, is filtered, enters a cooling system, is then liquefied, passes through a water separator, and flows into a light oil tank. After degreasing and desulfurization, clean and transparent diesel oil can be obtained. The average diesel yield is 80%-85%. Finally, the residue in the furnace is discharged from the furnace. It is a substance that functions like asphalt. The approximate yield of bitumen is: 15%-20%. The end product of the Dongying Group's used tire refining equipment was diesel oil and asphalt. What are their main uses? 1. Diesel: Mainly used for heavy machinery, generator power oil, and boiler heating combustion oil. 2. Asphalt: Mainly used for direct paving, or sent to asphalt refineries.
The HiPer HR GNSS receiver overcomes field challenges with a unique blend of technologies. If you are under tree cover, or can't get the pole plumb, or need to range widely from your base, or you need superb accuracy, or work in wet conditions, or all of the above, youâ??ll be free to do your best work. Features include Next generation Fence Antenna for superior reception Rugged, waterproof IP67 environmental design Cellular, LongLink and Radio communications all integrated 452 Universal Tracking channels Unique 9-axis TILT compensation Internal Wi-Fi and multi-spectrum Bluetooth HiPer HR Specifications GNSS Tracking Number of Channels: 452 with patented Universal Tracking Channel Technology GPS, GLONASS, Galiileo, BeiDou, QZSS, SBAS, L-Band Satellites Tracked: All in view Update/Output rate: Up to 20 Hz Communications Radio: UHF(410-470MHz), SS (915 MHz) LongLink: Yes I/O Communications: Internal Cell modem, Wi-Fi, Bluetooth Memory/Data Storage: Up to 8 GB Power and Electrical Power: External power, 6to28VDC, 2 x Internal batteries, 3.7 V, 2900 mAh each Operation Time: Up to 9 hours with removable batteries Physical and Environmental Operating Temperature: -40�°C to 80�°C Waterproof: IP67 Drop Test: 2 meter pole-drop Weight: 1kg Accuracy Static/Fast Static:: H: 3 mm 0.4 ppm, V: 5 mm 0.5 ppm Precision Static: H: 3 mm 0.1 ppm, V: 3.5 mm 0.4 ppm RTK (L1 L2): H: 5 mm 0.5 ppm, V: 10 mm 0.8 ppm RTK, TILT Compensated:H: 1.3 mm/
Oil absorbent pillows and bags are used to absorbs oil, fuel, diesel, petrol and other hydrocarbons but will not absorb water-based liquids, acids or bases. Oil and fuel absorbents are made from meltblown polypropylene and are colour-coded white for easy identification. These absorbents are able to absorb up to 20 times their own weight in oil and have a fast-wicking action to clean up spills quickly. Oil Absorbent Pillow Benefits High Absorbency Light Weight Easy to Transport Great for Large, Concentrated Spills Durable Design Helps Absorb Spills at the Source No Tools Required for Installation or Removal Oil Only Target: Hydrocarbons, Oil, Petroleum and other Oil Based Liquids. ITEM CODE:JXY-OAC001,002,003,004 Dimension:25cm x 25cm,30cm x 35cm,40cm x 45cm,45cm x 45cm Qty Per Bale:20pcs per bale,10pcs per bale
Supply all isuzu electric part for many engine: Air conditioning actuator Air separator Control unit Dehydrator solenoid valve Egr actuator Egr valve Electric diesel oil pump Electric petrol pump Engine mount Engine oil overflow valve Exhaust manifold Exhaust valve Expansion valve Flameout device Fog light assembly Fuel injector Fuel tank gauge Generator Glowplug indicator High-pressure pump Meter Oil alert Oil pressure regulator Oil pump Oil water separator Pressure dispensing valve Rear bumper lamp Relay Sensor Spark plug Speed sensing control unit Starter assembly Switch Thermo gauge Throttle Warm-up timer Water injection nozzle Water temperature alert An so on, welcome to provide the part number of your need.
Oil Purifier Such As Transformer Oil Purifier, Insulation Cable Oil Recycling Plants, Turbine Oil Purifier, Lubricating Oil Purifier, Hydraulic Gear Compressor Oil Filtration Equipment, Waste Cooking Oil Renewable Machine, Insulating Oil Treatment Plant, Transformer Oil Reclamation Plant, Diesel Fuel Oil Purifier.
Building materials like marble, granite, sandstones, slatestones, limestones, landscaping stones, anchors, nuts and bolts and screws, stainless steel and brass hardware, scaffoldings, welding machines, cement, clinker, iron ore, copper cathodes and copper wire, aluminium and zinc ingots, crude oil and fuel oil, diesel.Exporters
Specifications: API SG/CD Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 5 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.
Application: For heavy-duty service unloading and loading petroleum products at terminals and docks where maximum flow rates are desired. Construction: Premium quality materials, highly flexible, light in weight. Synthetic fabric plies reinforced with a helix of spring steel wire. Construction : Inner Tube: Black Extruded NBR synthetic rubber. Reinforcement: High tensile textile cord, steel wire helix can be made when the customer request. Cover: High tensile synthetic abrasion and weather resistant rubber, black wrapped surface. Working Pressure: Constant Pressure 20 Bar / 300 psi Temperature Range:-20 +80 (-4 F 176 F) Application:Mainly used to deliver gasoline, diesel, fuel oil, hydraulic oil for all kinds of industrial, agriculture or mining equipment. Nitrile tube designed for use with oil, gasoline and other petroleum products. Ideal for pressure, gravity flow or suction service from tank trucks, tank cars or bulk plants. Steel wire helix is spiraled between multiple plies of tire cord to reinforce hose to resist crushing and kinking. Black neoprene cover is abrasion, oil and weather resistant. A very flexible economical,lightweight designed for transfer of petroleum products. Excellent for use in oil field applications. A medium duty petroleum suction and transfer hose designed to be highly flexible with a hose cover that provides extra abrasion resistance to meet the demanding requirements of the industry. A tank truck service, including oil field vacuum truck service, where full suction is required. Ideal for handling crude oil, salt &fresh water, tank bottoms, drilling mud, along with diluted solutions of hydrochloric acids and diesel fuels. Petroleum Hose for Oilfield Applications will include hose specs that utilize high-quality Nitrile rubber liners for ultimate oil resistance. This section covers hoses for oils, finished petroleum products, medium and heavy hydrocarbons, diesel fuels and other petroleum applications. Petroleum hose for oilfield applications are used in the high-pressure transfer of multiple types of hydraulic fracking fluids from tank trucks. These hoses are constructed with a dual steel helix wire to obtain a high vacuum rating. Oilfield uses may include: Filling and emptying petroleum tanks at the fracking site Oilfield service truck use. Petroleum vacuum service. Waste pit and vacuum truck use. Diesel fuel transfer Feature: Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
Sino-NSH-CP series is an oil purification system with thermal, filtering and centrifugal separation processing, with capacity from 1500 liter/hour to 6000 liter/hour. Sino-NSH-CP series is especially designed for the oil industry for the purification and recycling of liquid oil. This series is designed to overcome the harmful effects of oil contaminants, water and solid particles from fuel oil, lubricating oil and other mineral engine unit and land generator unit of power station so as to reduce wear of diesel engine and other machine, and prolong the serving life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
YTO-X700PRODUCTS FEATURES70hp,, two-wheel drive.YTO LR4B3-23 diesel engine, UK Racado technology applied, large torque reverse, low carbon & environment-friendly, low fuel specific consumption.Dual clutch of independent control, normal drive of farm implements when shifting with higher operating efficiency.FAQQ: What's YTO Group?A: YTO Group Corporation is a leading agricultural machinery and construction machinery manufacturer in China.Q: How many kinds of products YTO produce?A: YTOs products including: tractor, farm implements, wheel loader, forklift, bulldozer.
Fason waste lubricant oil distillation plant is a newly developed product which combines dozens of our latest technologies. It is able to rapidly extract light and heavy distillates from different fractions by given different temperatures control along with our own formulated catalyst compound. It can also remove the metallic compound, base nitrogen, sulfur etc. From distilled oil during re-refining process. The end product after distillation could be adjusted into either new base oil or golden diesel fuel according to the customer demands.
A 35 ton diesel forklift is a type of heavy-duty industrial forklift that is capable of lifting loads weighing up to 35 tons. These forklifts are typically used in manufacturing, construction, and other industries that require the movement of large, heavy loads. Features 1) The engine adopts a turbocharged engine with low fuel consumption, which has good power performance and a large torque reserve. 2) The braking system adopts the mature products of the manufacturer. The brake is a disc brake, with fast heat dissipation, lightweight, simple structure and convenient adjustment. It has good high-temperature resistance performance under high load and a stable braking effect. 3) The gearbox adopts a domestic brand gearbox, which has good driving performance and traction performance. It is easy to maintain, economical and applicable, and the accessories have good versatility. 4) The operating system adopts the pilot valve to control the working system. Simple, convenient and comfortable operation. While reducing the labor intensity of the driver, the work efficiency is improved. 5) Hydraulic system, double pump confluence, small system flow, low power consumption, stable performance. 6) The electrical system is equipped with maintenance-free batteries. Flame retardant wire and sheath, electrical components. 7) The cab is luxurious with shock absorption, equipped with a sunroof, heating and cooling air conditioner, wide field of vision and comfortable seat. With explosion-proof film, explosion-proof, heat insulation, anti-glare, and sound insulation. 8) The fork adopts high-strength, mature products of the manufacturer, which can double the service life. 9) Tire rim, no spoke steel rim, bears a heavy load. Sino-US joint venture puncture-resistant high-strength tires. 10)Reinforced drive axle, high-strength heavy-duty planetary wheel-side reduction drive axle. The axle housing has higher strength and greater bearing capacity. With stability and stability.
The hand held flow meter is a battery-powered ultrasonic flow meter with the capability of a full-size flow meter. It is carefully designed for portability and ease of use. The hand held flow meter is based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers. In general, the liquid should be full in the pipe, and should contain very little particles or bubbles. Examples of applicable liquids are: water (hot water, chill water, city water, sea water, etc.); sewage; oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.); chemicals (alcohol, acids, etc.); waste; beverage and liquid food, solvents and other liquids. Due to the nature of clamp-on technique, the transducer installation is simple and no special skills or tools are required. Besides, there is no pressure drop, no moving parts, no leaks and no contamination. The hand held flow meter utilizes our proprietary technologies such as advanced signal processing, low-voltage transmitting, small signal receiving with self-adapting, and etc. It also incorporates the latest surface-mounting semiconductors and mini PCB design techniques. The built-in rechargeable Ni-H battery can work continuously for more than 10 hours without recharge. Features 0.5% of linearity Wide pipe size range 0.2% of repeatability 100 Pico-second time measurement resolution 1% of accuracy at velocity above 0.6ft/s. 0.5 second totalizing period 0.5% when on-site calibration is Built-in data-logger available Clam-on transducer. Easy to install and to maintain Bi-directional measurement Light weight, portable. Main unit 1.2lbs. 4 flow totalizers Also able to be used for long-term deployment Proprietary low-voltage transmission technology
China HSHCL JM Model Diesel Engine Winch 5 Ton is composed of roller drum, gearbox, diesel engine and base frame. Working principle: The winch groove is used to directly connect the wire rope to the traction slot, with diesel engine, motor as power, gearbox speed to achieve the required speed, the machine is located in the steel structure, stable and easy to move. China HSHCL JM Model Diesel Engine Winch 5 Ton used for hoisting and transport heavy goods, such as steel structure, the installment of the machine equipment and the travel crane. Diesel Engine Power Winch apply to the out door site where have not electric supply. Use this type winch, user don't need take the generator, power supply by diesel engine, it is a ideal product for pulling and lifting work in remote are without electric supply. Also it can as anchoring winch on ship and platform. Diesel Engine Power Winch of the machine are frequency conversion stepless speed change. The features of structure: stepless speed change, two stage trig (high speed and low speed), operation safely and convenient. Matters Attention 1. The rope of drum should line up, if the wire is overlapped and crossed, the operator should stop electric winch and line up the wire rope again. It is prohibited that people pull and step on the rope when the winch is working. The wire rope is allowed not to release fully,at lease it remain 3 circle of rope. 2. The wire rope is not allowed to knot and twist around. If the broken wire rope is more than 10% within a pitch, the wire rope should be replaced. 3. When the electric winch is working, anyone should not step over the wire rope. After the materials are lifted by the winch , the operators should not leave it. when people rest, the materials or cage should be in the ground. Packing & Delivery Packing: China HSHCL JM Model Diesel Engine Winch 5 Ton are packed by high quality plywood crate to reduce distortion. Delivery: Transport ways are based on reducing cost and keep the electric winch performance.
PRODUCT SPECIFICATIONS Product : Desiccated Coconut Grade : High Fat Fine Scope : This standard applies to the desiccated coconut product sold by PT Agrostar Andalan Nusantara A. Physical 1. Colour : Natural white, free from yellow specs ot other discolouration. 2. Flavour/Odor (F/O) : Mild and sweet characteristics of coconut, free of foreign F/O 3. Size : Fine granules of coconut 4. Granulation : No. Of sieves (ASTM) % Ratained On Mesh 10 : 2 Mesh 14 : 4 -10 maximum Mesh 16.20 : 40 - 73 maximum Mesh 30 : 20 - 33 maximum Pan : 12 maximum B. Chemical 1. Moisture Content, % : 3.0 maximum 2. Total Fat (Dry Basis), % : 63 - 68 3. Free Fatty Acid (as lauric) dry basis, % : 0.10 maximum 4. Residual SO2, ppm : Free/50 ppm max 5. pH (10% dispersion filtrate) : 6.1 to 6.7 6. Total Aflatoxins, ppb (DL : 4 ppb) : Not Detected 7. Organiphosphorus Pesticide residues, ppm (DL : 0,1 ppm) : None Detected C. Microbiological 1. Total Plate Count, cfu/g : 5,000 cfu/gram maximum 2. Yeast : 50 cfu/gram maximum 3. Moulds : 100 cfu/gram maximum 4. Enterobacteriaceae 100 :50 cfu/gram maximum 5. E. Coli (Type I) : Negative/10 grams 6. Salmonella : Negative/50 grams D. Ingredient List Raw Coconuts E. Packaging and Packing Size Standard Packing : 25 kg Polyethylene-lined 3 ply kraft paper bags Optional Packing : 10 kg, 50 kg, 50 lbs, 100 lbs Depending on customer's requirements. F. Storage Condition Recommended storage between 50oF 60oF (10-15.5oC) and 50%-60% relative humidity in clean odour free area and away from wall where coconut products will keep for 12 months. Avoid storage in high moisture area.
We are a ship recycling company based in Japan. We specialize in supplying marine diesel engines and generators. The engines and generators are extracted at our facility from various vessels including Naval training, coast guard, and Fishing vessels. We currently have Two MTU 12V183 Engines with gearboxes in pristine working condition. These engines have been extracted from Coast guard vessels at our yard and are ready for immediate export. If you are interested in these engines please let us know Via email or WhatsApp. We look forward to hearing from you.
Greetings. We are a prominent ship recycling company in Japan, and are committed to offering top-notch products tailored to our valued clients' needs. We specialize in supplying diesel marine engines in the range of 600 to 1000+ horsepower, extracted at our facility from various vessels including Naval training, coast guard, and Fishing vessels. We're excited about the possibility of collaborating with you to contribute to your project's success. For your marine engine requirements, kindly contact us via email. We assure you of our prompt response.
En590, a1 jet fuel & petroleum products.Act as a commission agent and mandate
PE Powder Resin - 0.47 FOB NJ Port/Warehouse Petroleum Refinery Post Industrial Access to 200 - 250 Metrics Tons Monthly Technical data sheet: mp resin type "sv" Appearance: Powder Physical state: Powder resin Color: Straw / grey Odor: Insignificant Melting point: 180/200 � c Solubility in water: Not soluble Solubility: In aromatic solvents Specific weight: 0.7 - 0.8 Melt index: 3 - 5 Auto-ignition temperature: > 360 � c Mass volume uni en iso 1183-1:2005 met.B : 0, 845 kg/dm3 Mass fluidity index (mfr) uni en iso 1133-1: 2012 2.95 � 0.59 g / 10 min Volume fluidity index (mvr) uni en iso 1133-1: 2012 3.49 � 0.69 cm3 / 10 min
Product Specifications Product : Desiccated Coconut Grade : High Fat Medium Scope : This standard applies to the desiccated coconut product sold by PT Agrostar Andalan Nusantara A. Physical 1. Colour : Natural white, free from yellow specs ot other discolourations 2. Flavour/Odor (F/O) : Mild and sweet characteristics of coconut, free of foreign F/O 3. Size : Fine granules of coconut 4. Granulation : No. Of sieves (ASTM) % Ratained On Mesh 6 : 0 Mesh 10 : 2 - 13 maximum Mesh 12.14 : 43 -71 maximum Mesh 16.20 : 20 - 46 maximum Pan : 1 - 6 maximum B. Chemical 1. Moisture Content, % : 3.0 maximum 2. Total Fat (Dry Basis), % : 63 - 68 3. Free Fatty Acid (as lauric) dry basis, % : 0.10 maximum 4. Residual SO2, ppm : Free/50 ppm max 5. pH (10% dispersion filtrate) : 6.1 to 6.7 6. Total Aflatoxins, ppb (DL : 4 ppb) : Not Detected 7. Organiphosphorus Pesticide residues, ppm (DL : 0,1 ppm) : None Detected C. Microbiological 1. Total Plate Count, cfu/g : 5,000 cfu/gram maximum 2. Yeast : 50 cfu/gram maximum 3. Moulds : 100 cfu/gram maximum 4. Enterobacteriaceae 100 :50 cfu/gram maximum 5. E. Coli (Type I) : Negative/10 grams 6. Salmonella : Negative/50 grams D. Ingredient List Raw Coconuts E. Packaging and Packing Size Standard Packing : 25 kg Polyethylene-lined 3 ply kraft paper bags Optional Packing : 10 kg, 50 kg, 50 lbs, 100 lbs Depending on customer's requirements. F. Storage Condition Recommended storage between 50oF -60oF (10-15.5oC) and 50%-60% relative humidity in clean odour free area and away from wall where coconut products will keep for 12 months. Avoid storage in high moisture area.
