Offer is only for genuine end buyer, able to prove credible with official intent letter, and proof of funding.. All others please do not waste our time We can supply mazut M100-75/99, D2, JP54, LNG, D6 and other petroleum products. We can supply both CIF / FOB deals. No advance... We are looking for real and genuine buyers to work with. Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel.
Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. In the United States and Western Europe mazut is blended or broken down with the end product being diesel. Mazut may be used for heating houses in former USSR and in countries of Far East that do not have the facilities to blend or break it down into more traditional petro-chemicals. In the west, furnaces that burn Mazut are commonly called "waste oil" heaters or "waste oil" furnace.
Used engine oil from vessel, refinery plants, heavy machines for sale in large quantity for continuous buyers.
Adafdsfa Aasdf
Our sfw series liquid level sensors are custom-designed to your specification requirements. All of the material of our liquid level sensor is considered during the design procedure to ensure they will perfectly suit your requirement. The length and resistance range of the liquid level sensor is customizable. There are two mounting ways available as well: 1-1/4¡æø bsp thread and sae 5 holes for you to choose. Our liquid level sensors are compatible with most fluid types including fuel, bio-fuel, diesel, oil, water, def/adblue, and other special fluid. The liquid level sensors are designed using materials that are suitable for above applications, including aluminum, stainless steel #304/316, nylon and abs. Analog output with reed switch technology Various kinds of materials for every type of liquid application 1-1/4" bsp thread or sae five holes fitment options Customizable resistance range (ohm value) for liquid level at empty from full Available sensor length from 100mm to 2000mm Liquid level sensors have optional connector output with flying leads or your desired pin side connector Optional low level alarm to remind the driver to fill up the fuel when the fuel level down to the empty Can be integrated with gps tracking and monitoring system (added value)
Invert sugar = 53.61% Density = 86.48
Test Method Limit Unit Guarantee Density @ 15C,ISO 3675 or ISO 12185,Max,Kg/L,0.955 Kinematic Viscosity@40C,ISO 3104,Max,Cst,280 Flash Point,ISO 2719,Min Pour Point (upper),ISO 3016,Max Carbon residue,ISO 10370,Max,%m/m,15 Ash Content,ISO 6245,Max,%m/m,0.1 Water Content,ISO 3733,Max,%v/v,1 Sulphur Content,ISO 8754 or ISO 14596,Max,%m/m,4 Vanadium,ISO 14597 or IP 501 or IP 470,Max,mg/kg,+20 Total Sediment potential,ISO 10307-2,Max,mg/kg,0.1 Aluminum Plus Silicon,ISO 10478 or IP 501 or IP 470,Max,mg/kg,80 Sodium,ISO 10478 or IP 501 or IP 470,Max,mg/kg,15 Phosphorus,ISO 10478 or IP 501 or IP 470,Max,mg/kg Nickel,ISO 10478 or IP 501 or IP 470,Max,mg/kg,15 H2S Content,ISO 8217-2010, Max,mg/KOH/g,0.5 max Organic chloride, ASTM D 4929,,PPM,0
Test parameters, test values, test method Viscosity @100 c, 5, astm-d445 Flash point c, 165-170, astm-d92 Pour point c, -6, astm-d97 Density @ 15 c, 0.86, astm-d4052 Color, 1.5-2, astm-d1500
Test parameterstest values test method Viscosity @ 100c 4.5-5 astm-d445 Flash point c165 astm-d92 Barrel
Test parameters, test values/vg32, test method Viscosity @ 100c, 05-06, astm-d445 Flash point c, 170-175, astm-d92 Pour point c, -6, astm-d97 Density @15 c, 0.872-0.875, astm-d4052 Color, 1.5-2, astmd1500 Barrel
Test parametersTest values/vg22Test method Viscosity @ 100c4.5-5Astm-d445 Flash point c165Astm-d92 Pour point c-9Astm-d97 Density @15 c0.872Astm-d4052 Color2Astmd1500
Test parameterstest values/vg32test method Viscosity @ 100c05-06astm-d445 Flash point c170-175astm-d92 Pour point c-6astm-d97 Density @15 c0.872-0.875astm-d4052 Color1.5-2astmd1500
Kinematic Viscosity at 100C / Max: 380 C.St/ ASTM-D445 Pour Point (upper) / 32> C/ ASTM-D97 Flash Point/ Min: 55 C/ ASTM-D93 Sulphur Total/ Max: 4 Wt%/ ASTM-D4294 Carbon Residue (Conradson)/ Max: 13 Wt%/ ASTM-D189 Ash/ Max: 0.1 Wt%/ ASTM-D482 Water & Sediment/ Max: 1 Vol%/ ASTM-D1796 Calorific Value (Higher)/ Min: 41.8 Mj/Kg / Calculated
Characteristic Base oil Recycle SN 500 Kinematic viscosity @ 100/cSt9-10 Flash Point,C210 Color2.5-3 Pour Point0 Density885
Test ParametersTest ValuesTest Method Viscosity @100 c5Astm-D445 Flash Point C165-170ASTM-D92 Pour Point c-6ASTM-D97 DENSITY @ 15 C0.86ASTM-D4052 Color1.5-2ASTM-D1500
Property, value, unit, test method Ethylene purity, ≥ 99.9, mol%, Hydrogen, 10, ppm vol, astm d2504 Carbon monoxide, 2, ppm vol, astm d2504 Carbon dioxide, 5, ppm vol, astm d2505 Total sulfur, 2, ppm vol, astm d6667 Methane+ethane 1000, ppm vol, astm d2505 Acetylene, 5, ppm vol, astm d2505 Totalc3& higher, 10, ppm vol, astm d2505 Total combined nitrogen calculated as nh3, 1, ppm vol, astm d4629 Water, 10, ppm vol, astm d5454 Oxygen, 5, ppm vol, equipment manufacturing Methanol and other solvents, 10, ppm vol, astm d4815
Base oil : synthetic hydrocarbons (100%) Appearance : bright yellow liquid Pour point : (-60) - (-40)c Moisture content : 50 - 100 ppm Total acid no. : 0.005 - 0.01 mg koh / g Distillation 10 % : above 375c 210 litre barrel
We would like to take an opportunity to introduce our company as ar eco save, marketing co., of fuel conditioners with its unique product diesel+ in india, extensively accepted worldwide in terms of performance and best results in saving environment, fuel & money. Diesel+ is a vegetable extract based additive, does not contain any harmful chemicals and is non-toxic 100% biodegradable. An established product with all certifications and laboratory tests. Diesel+ has done more then 100+ trials in different usage of diesel fuel engines like transport vehicles, generators, dumpers & ships etc.,
Lpg - any mix Per mt
Gasoil, diesel, low sulphur fuel oil, naphtha, jet a1 Bulk
