The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40HC container. For further details, please feel free to contact us.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Dry Moringa leaves in bulk is available in conventional and organically grown variety. Can supply 20 MT per month. Interested importers may please contact. can provide complete COA and relevant test certificates also.
per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed. Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves Single use, non-sterile, no measuring, Latex free Sizes: XS, M, L. XL. XXL Color: Blue, Green Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface: Smooth The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was developed based on the vinyl glove production technology. Its material is compounded with PVC paste and Nitrile latex, so the finished production has the advantage of both PVC and Nitrile gloves. Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better satisfy the users demands, it feels softer, more flexible and more comfortable when wearing. Intended purpose: The examination glove is disposable non-sterile device intended for medical purpose that is worn on the examinerâ??s hand or finger to prevent contamination between patient and examiner. Medical Device Quality Management System EN ISO 13485 Certificate, ISO 9001 Quality Management System Certificate - 2 FDA FDA Registration Information - 510K Product 510K Biocompatibility Test Report EU CE Certificate (DOC, Technical Documentation Review Report )
All our Avocados are grown at 1,000-3,000m above sea level with maximum day temperatures of 28C & night temperatures of 12-15C. This is very different to product grown in Spain, Mexico, South America, New Zealand & Australia which grow mainly at Sea Level, and in very dry areas with a lot of heat. Our Avocados do not get stressed as they grow at high altitude. During the day the trees and the fruit grow, and at night they rest. As a result of this the fruit takes an extra one -two months to mature. This results in a superb Avocado with a strong colour, rich flavourand nice texture. Due to the rains we get twice a year around the Equator the trees grow naturally. There is need for additional irrigation during the dry season but not much water is used. This means our water footprint is also very low. At high altitude there are very few pests and diseases & the trees continue to grow and with minimal pest pressure so there is little to no chemicals sprayed. Our Frozen Avocados are harvested at optimal maturity, and then natural ripened. After this each avocado is handled, one by one, by our team of ladies who are skilled food handlers & have been trained on post-harvest Avocado processing, to prepare the halves, chunks and slices. Each piece of the Avocado is handled with a lot of care, and individually frozen at -35C to capture the essence of the fruit and not allow any damage.We can pack for consumers in 300gms / 500gms 1kg, 2kg or 5kg ziplockbags.
Hello, We can supply petroleum products at following price and procedures: Export Grade: LOADING PORTS- ROTTERDAM/HOUSTON Origin: Kazakhstan Payments Term: MT103/23/ TT wire transfer Inspection by: SGS, INTERTEK OR SIMILAR JET FUEL A1 (AVIATION KEROSENE COLONIAL GRADE A1) Quantity: Minimum 1,000,000 BBL spots / Maximum 5,000,000 BBL per month FOB PRICE: Gross USD 90 NET PRICE: USD 86 (Commission: Seller 50 / buyer 50) EN590 (10 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) EN590 (50 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) APPROVED FOB DELIVERY PROCEDURE 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyers logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in sellers tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyers desired duration upon successful completion of the trial order. All intermediary is paid within 48 hours and seller and buyer consider and sign contract.
Commodity: Jet Fuel A1 Origin: Non-Sanctioned Quantity: 4 Million Barrels Price: 84 USD Gross Commodity: En 590 10 PPM Origin: Non-Sanctioned Quantity: 200.000 MT Price: 560 USD Gross VOPAK TO VOPAK PROCEDURE 1. Buyer Sends CIS with the purchasing product to Seller through Seller's Mandate for verification: 2. Seller Company assigned Vopak Botlek Europoort Terminal Manager to buyer. 3. Buyer finalize the Vopak Botlek Europoort protocals through the Vopak Botlek Europoort Terminal Manager, obtain the following and submit the same to seller company as listed below. * Vopak Botlek Europoort Barcode - Vopak Botlek Europoort Registration information. * Exact name and reference of their Vopak Botlek Europoort account. �¢?? 3b. Format of Authorization Form to accompany the information. LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of tanks at Royal Vopak Rotterdam, with contract reference number: _____________. 4. Seller Company sends Cl for Buyer's endorsement. Buyer sign the CI and return back within 24 hours of receiving alongside side with Vopak Botlek Europoort Barcode and Sign Letter of Authorization. 5. Seller Company gives Buyer Full POP documents along with fresh SGS (less than 48 hours onetime official confirmation mail from SGS official). * Fresh SGS Report or Saybolt (Not later than 24 - 72 hours) * Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. * Injection Report Agreement * Authorization to Sell * Authorization to verify the product in the tank (ATV) * Country Certificate of Origin * Approved Dip Test Authorization (DTA * Availability of Product, * Commitment to Supply, 6. After verification of full POP by buyer, injection begins. 7. Upon completing the Injection, seller Company transfers title to buyer. 8. Buyer makes full payment after via MT103, seller Company pay commission to the intermediaries
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality:LNG Price TTO;$260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Terms;MT103/TT/DLC/LC/ESCROW/BTC Below procedures are NOT NEGOTIABLE. TANK TO VESSEL TAKE-OVER STANDARD PROCEDURE 1. Buyer issues official ICPO with company registration, buyers passport data page and banking details. 2. Seller issues MOU to buyer and buyer signs and send back to seller 3. Upon receipt of the countersigned original MOU from the buyer, seller emails to buyer the below listed documents:- 1) Certificate of Product Origin 2) Product Passport (Quantity & Quality Dip Test Analysis Report) 3) Bill of Lading 4) Tanker Vessel Q88 5) Cargo Manifest 6) Payment invoice for Title Takeover, 7) Ullage Report. 4) Upon buyer receipt of the documents, within 48 hours buyer contact the vessel captain and verifies the shipping documents of the product onboard the tanker vessel and pays 5% of the cargo value for the title takeover which amount to the sum of $450,000.00 5) Upon seller receipt of the title takeover payment, Seller transfers the title to the potential buyers company's name and issues all documents to the buyer company's name and send via swift from sellers bank to buyers bank the full prove of product documents. 6) Buyer carries out the CIQ/SGS inspection and upon a successful inspection; buyer pays via TT MT103 for the full product to the seller and after commences vessel to vessel transfer of the product. 7) The inspection at the loading port still remains the Russ Standard GOST R Quality and Quantity Analysis Report while inspection at the discharge point will be performed by Societe General De Surveillance SGS or CIQ at the expense of the potential buyer
28 AWG 10C ECG Cable OD: 6.0±0.15mm Conductor: 19/0.08 Tinned Copper 10C Insulation: PP, OD: 0.72mm Braid Shield: Tinned Copper 24/7/0 .10 90% coverage Filler: PVC material White color, OD: 2.3±0.08mm (Center filler 1000 denier Kevlar yarn) Paper wrap: Tissue paper wrap and overlap 25% Jacket: PUR, OD: 6.0 ± 0.15 (Beige)
World standard for medical ECG/Ultrasound transmission MHC Gels are the most widely used gel for diagnostics & therapeutic medical Ultrasound. The Gels are used for all procedures where a viscous gel is required. The same are available in the packing of 250 ml bottles & 5 kg Jar.
¡ñ compact in size, easy and direct operation, portable Working modes: manual / auto / arrhythmia analysis 50mm, single channel format recording Accurate automatic interpretation function 20¡¡§¡é2 graphic character display Lead-off indicator Automatic adjustment of baseline Built-in ecg simulator Adapt to 110-230v, 50/60hz power supply Built-in rechargeable ni-mh battery High resolution thermal printing
Compact in size, easy and direct operation, portable Working modes: manual / auto / arrhythmia analysis 80mm, 3 channel format recording Accurate automatic interpretation function 320*240 graphic 3.8 inch lcd screen 12 leads synchronously acquisition and display 20patient cases save and replay (extendable) Adapt to 110-230v, 50/60hz power supply Built-in rechargeable ni-mh battery High resolution thermal printing Usb/rs232 interface
Compact in size, easy and direct operation, portable Working modes: manual / auto / arrhythmia analysis 112mm, 6channel format recording Accurate automatic interpretation function 320*240 graphic 3.8 inch lcd screen 12 leads synchronously acquisition and display 20patient cases save and replay (extendable) Adapt to 110-230v, 50/60hz power supply Built-in rechargeable ni-mh battery High resolution thermal printing Usb/rs232 interface
Compact in size, easy and direct operation, portable Working modes: manual / auto / arrhythmia analysis 215mm, 12channel format recording Accurate automatic interpretation function 320*240 graphic 5.7 inch lcd screen 12 leads synchronously acquisition and display Alphanumeric keyboard for operation and input 20patient cases save and replay (extendable) Adapt to 110-230v, 50/60hz power supply Built-in rechargeable li-ion battery High resolution thermal printing
Handheld ECG Readmyheart (rmh) is a light weight handheld electrocardiogarm (ecg) recording device that traces the electrical activity of the heart. Ecg signals are obtained via rmh's spcially designed dry conduction electrodes eliminating complicated wires and conducting gel. Press the start button twice and gently place your thumbs on the electrodes. The device will automatically start the recording of ecg signals.
Handheld ECG It is a handheld, personalized use, and dry electrode ecg recording device which records user's cardiac functions for daily health check-ups. How much do you know your sweat "heart"? if you could give me your hands, readmyheart could show you each heartbeat just in 30 seconds. It records modified ecg through thumbs. Currently, we are looking for proper distributor or agent whom we could establish a business relation for import. We believe that our product are conformed to your company's objective and will become famous in your market before long.
1. POCKET size, EASY to operate 2. DRY FINGER Electrode design for CHANNEL 1 3. Multiple channels by auxiliary electrode cable 4. Data Storage up to 30 events 5. Applied for Home Care and Personal Health Management 6. Data Transmission available by Internet or Modem 7. AUTHENTICATED by CE/TUV/FDA/Health Canada approval 8. Model no.: RMH V2.0 / RMH V2.1
Model number: ecg-901(single channel) Dimension:288mmx204mmx60mm Packing:380mmx300mmx210mm Weight:4.3kg(gross); 3.27kg(net) Single channel with measurement report Build in rechargeable ni-mh battery Chinese/english language Simultaneous 12 leads 20x2 character lcd Paper size: 50mmx20/30m Built in rs232 interface (usb is optional)
Model number: ecg-901a (single channel) Dimension:288mmx204mmx60mm Packing:380mmx300mmx210mm Weight:4.3kg(gross); 3.27kg(net) Single channel with measurement report Build in rechargeable ni-mh battery Chinese/english language Simultaneous 12 leads 320x240 graphic lcd, 3.8 inch screen Paper size: 50mmx20/30m Built in rs232 interface (usb is optional) 8 patients save/copy/communication
Model number: ecg-903 ( three channel) Dimension:300mmx230mmx61mm Packing:375mmx295mmx195mm Weight:4.5kg(gross); 3.57kg(net) Three channel with interpretive Build in rechargeable li battery Chinese/english language Simultaneous 12 leads 192x64 graphic lcd Paper size: 63mmx20/30m Built in rs232 interface (usb is optional)
