With superior strength and corrosion resistance casing panels from fiberglass composites offer premium performance for end users. Providing long service life, the high quality, FRP materials deliver significant life cycle cost savings. 1) Superior Fiberglass Strength Longer Spans & Low Cost Installation Fiberglass reinforced plastic panels are much stronger than PVC or chopped strand casing. With high content of continuous glass fiber reinforcements, 35% by weight, aligned for optimum performance, the panels have superior strength and stiffness. This results in longer span capability and lower cost installation. 2) Corrosion Resistance + UV Protection Long Service Life & No Maintenance Fiberglass materials do not corrode in wet or tough industrial conditions. Its premium, UV stabilized polyester resin ensures long service life and extended retention of aesthetic properties. Technical Strength: 1) Concept Design 2) Material selection 3) Process determination 4) Model processing 5) Mold design 6) Reverse Engineering Process Technique: Hand lay-up, L-RTM, SMC, etc
Nitrile gloves, latex gloves, face mask, covid 19 test kit, safety gloves, industrial gloves, oils for food & cosmetics, rice, agricultural products, tuna, shampoo used cars, brand new cars, buses, truck, battery for cars, tire scraps.Shipping, clearing agency, tender for korea government.
Leather goods, fashion apparel (men, women, kids), home furnishings, kitchenware/houseware, safety products, vintage furniture.
Safety Insulin Syringe with Restractable Needle Safety Characteristics: after absorbing the expected dose of liquid medicine, if transportation is needed, push up the sliding-sleeve to protect the needle tip from physical damage during transportation; push the sliding sleeve to expose the needle tip before the injection starts, when the expected dose of liquid medicine is 100% injected, manually slide the sliding sleeve to the position where the connector base can no longer slide, the needle tip is completely covered in the sliding sleeve, and then the sliding sleeve is manually rotated until it is locked, it could effectively preventing repeated use and accidental needle sticking, and avoiding cross infection.
Item No.: 2058-06 Size : 39 - 46 (5-12) Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number: 2058-06 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Repellant Buff Waxy Lining : Soft Buff Leather Toe : Steel Footbed / Socks: Padded Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and co
Item No.: 2058-11 Size : 39 - 46 (5-12) Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S2 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number : 2058-11 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell Lining : Soft Buff Leather Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 2080 - 62 Size : 36 - 47 (5-13) Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080 - 62 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Nubuck Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Midsole : Steel Footbed / Socks : Felt Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 2080 - 68 Size : 36 - 47 (5-13) Soles : 2080 Dual Density PU SAFETY FEATURES Steel Toe Cap Oil Resistant Shock Absorber Anti Static Insole Anti Skid ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 36-47 (5-13) Colors : D Grey AVAILABLE OPTIONS Product Number : 2080-68 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual Or Mono Color : D Grey / Blue / Tan MATERIALS Upper : Water Repellant Nubuck, Suede and Breathable Textile Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Padded Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 2080 - 150 Size : 36 - 47 (5-13) Moq : N/A Soles : 2080 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Oil Resistant Shock Absorber Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 36 - 47 (5-13) Colors : Grey AVAILABLE OPTIONS Product Number : 2080 - 150 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : As Per Pic MATERIALS Upper : Water Repellant Nubuck, Suede and Breathable Textile Lining : Textile, Breathable, Abdosrbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 2080-181 Size : 36 - 47 (5-13) Moq : N/A Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Boot Standard : S1P Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080-181 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Repellant Nubuck Lining : Textile, Breathable, Absorbs And Release Moisture, Abrasion Resistant Toe : Steel Midsole: Steel Footbed / Socks : Cambrella And Eva. Antistatic Sole : 2080 Dual Density Pu Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003-107 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-107 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : As per pic MATERIALS Upper : Water Repellant Smooth Leather and Synthetic Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 7198 - 330 Size : 39 - 48 (5-14) Soles : 7198 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Clog Standard : S1 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 330 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown / White MATERIALS Upper : Water Repellant Smooth Haircell Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 3003 - 83 Size : 36 - 48 Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Boot Standard : S1P Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-83 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Repellant Smooth Haircell and Nubuck Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003 - 52 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-52 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole: Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Nubuck Lining : Soft Fur, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions
Item No .: 2058-15 Size : 39 - 46 (5-12) Moq : N/A Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number : 2058-15 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Reppellant printed Leather Toe : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU CERTIFIED: EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-354 Size : 39 - 48 (5-14) Moq : N/A Soles : 7198 Dual Density PU SEND ENQUIRY SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 354 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell & Helcore Lining : Soft Buff Leather White Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003-100 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-100 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper: Water Resistant Printed Leather Lining : Soft Fur, Abosrbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.