1.Product description The optical fiber unit is positioned in the center. Two parallel fiber reinforced plastics (frp) are placed at the two sides. Then, the cable is completed with a black or color lszh sheath. 2.Characteristics Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property Two parallel strength members ensure good performance of crush resistance to protect the fiber Simple structure, light weight and high practicability Low smoke, zero halogen and flame retardant sheath Novel flute design, easily strip and splice, simplify the installation and maintenance 1.Standards Complies with standard yd/t 769-2010. 2.Packaging & shipping Packaging Wooden drum, 3000m to 5000m/drum or as you required Shipping methods. By sea or by air Sheath mark Applied at 1-meter intervals A. Supplier: changguang or as customer required B. Standard code(product type, fiber type, fiber count) C. Year of manufacture: xxx D. Length marking in meters Delivery detail: Within 5-10 days after the payment
Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
Low loss, low dispersion, unique fiber spare length control and advanced cabling technology make the cable has excellent mechanical and environmental properties. Optical fiber ribbon enlarged the cable capacitance and improved fusion efficiency. Steel-plastic composite sheath has excellent moisture, resistant performance; PE bag
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or Hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Submarine communications and telecommunication.
The fibers, 250¦ìm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of psp longitudinally. Between the psp and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (pe) sheath. Charicteristic: good mechanical and temperature performance high strength loose tube that is hydrolysis resistant special tube filling compound ensure a critical protection of fiber crush resistance and flexibility psp enhancing moisture-proof two parallel steel wires ensure tensile strength Wooden drum
Selling optical fiber Performance indexes : Insertion loss0.1db Return loss Interchangeability Repeatability0.1db Plugging times Operating wavelength Operating temperature Storage temperature Features: Standards of iec, bell core Upc end-face finishing High return loss and low insertion loss High reliability and stability Applications: Fiber optic communication system Fiber optic catv Fiber optic test and measurement equipment Fiber optic backbone International standard packing
Fiber optic Description 1.Special two-layer tube technology for good flexibility and bend-resistant property. 2.Water-blocking compound filled up and all cross section double water-blocking. 3.Non-metal structure good electromegnectism resistant property, suitable for electric field and some areas where thunders usually happen. 4.Aramid yarn ensures the tensile strength performance. 5.Excellent water-proof layer, good moisture resistance. Application 1, suitable for both indoor and outdoor 2, long distance communication system 3, local area network system 4, subsiber network system Negotiate
Optical fibre
CAT6A, UTP CAT6 CABLE OUT-OIL FILLED CABLE, UTP CAT6 LSOH CABLES, FTP CAT6 CABLE OUT, FTP CAT5E CABLE, CAT5E LAN CABLE OIL-FILLED, FTP+ MESSENGER CABLE-CAT5E LAN CABLE, UTP- CAT5E CABLE FTP CAT5E NET CABLE, LSZH-UTP CAT5E CABLE, UTP CAT6 CABLE, UTP CAT6 CABLE OUT, FTP CAT6 CABLE,
Characteristics: .High strength kevlar yarn member. .High quality tight buffered or loose tube. .Soft and easy to strip. .Round construction. Application: .Adopted to indoor distribution. .As pigtail of communication equipment. .Suitable for communication equipment served. .Can be installed conveniently and perated simply. Standard package
Optical cable Application: CATV Test equipment Metro Applications Active device termination Local Area Networks (LANs) Data processing networks Premise installations
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel steel wires are placed at the two sides. The cable is completed with a polyethylene(PE)sheath. Characteristics Good mechanical and temperature performance High strength loose tube that is hydrolysis resistant Special tube filling compound ensure a critical protection of fiber Two parallel steel wires ensure tensile strength PE sheath protects cable from ultraviolet radiation Small diameter, light weight and friendly installation Long delivery length
The fiber, 250, either of single mode or multimode type, are positioned in a loose tube made of s high modulus plastic. The tubes are filled with a water-resistant filling compound. A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. Then the cable is completed with a black or color HDPE sheath.
Equipped with advanced testing equipment, the modern production lines built in the headquarters producing quality MPO and AOC fiber optic products.
The typical bow-type drop optical cable includes central optical fibers with 2 parallel KFRPs or steel wire as the strength members placed on both sides, a LSZH or PVC sheath is extruded outside. Â Temperature Range: Operating :-20 to 60 Storage: -20 to 60
The MPO / MTP patchcords are simplex multi-fiber Cable using the MPO / MTP connector in fiber counts of 4, 8, 12, 24 or 48. They offer Male and Female MPO / MTP connectors on each end. Available in 4~48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
The PMI is built based on PM collimator and Faraday isolator core with All-glass technique sealed process, which makes the isolator has very high stability and reliability.
