Power supply: AC220V50Hz Machine noise: 70dB (A-weighting) Power adapter: 12V Output power: 20VA Atomization rate: >0.2mL/min Residual liquid volume: 2mL Gas flow: 5L/min Bodyweight: Approximately 255 g Under normal working conditions, the maximum pressure generated by the atomizer should be in the range of 60kPa- 130kPa. When the host is abnormal, the maximum pressure generated by the atomizer should be in the range of 150kPa- 400kPa, and the tube body should not be ruptured. Equivalent volume particle size distribution: the proportion of fog particles 55% Median particle: The median particle size of the fog particles is 2.5um, and the error should not exceed ±25%
Built-in cleaning mode, high-sensitivity water detection, dualwave drive, the control system does not generate heat Atomization rate: 0.2ml/min about 0.35ml/min Atomized particles: median particle size 3 um±25%, The proportion of mist particles with a diameter of less than 5 microns is not less than 60%. Medicine cup capacity: maximum 8mL Noise: 50Db(A) Nominal frequency: 108kHz Residual liquid volume: 0.5ml Power supply: 2 AA batteries or DC5V power supply Working power: about 0.65W (5V/130mA) Working time: no less than 1 hour (using two new AA batteries) Net weight: about 110g (without battery) Size: 114mm*41mm*64mm Dry battery/lithium battery (optional)
Built-in cleaning mode, high-sensitivity water detection, dualwave drive, the control system does not generate heat Atomization rate: 0.2ml/min about 0.35ml/min Atomized particles: median particle size 3 um±25%, The proportion of fog particles with a diameter of less than 5 microns is not less than 60% Medicine cup capacity: up to 8mL Noise: 50Db(A) Nominal frequency: 108kHz Residual liquid volume: 0.5ml Power supply: 2 AA batteries or DC5V power supply Working power: about 0.65W (5V/130mA) Working time: no less than 1 hour (using two new AA batteries) Net weight: about 100.8g (without batteries) Size: 125mm*47mm*41mm Dry battery/lithium battery (optional)
Frankincense Hydrosol 5 Liter Frankincense Hydrosol, the benefits and uses Frankincense Hydrosol is produced through the steam or hydro distillation process of the Boswellia Carteri resin. Hydrosols are also known as herbal distillates, essential waters, hydrolats and herbal waters. This results in a hydrosol with a superior aroma and great properties yielding the much-needed benefits of the resin, in a gentler way than the pure essential oil. Frankincense Hydrosol is a beautiful skin-healer that boasts anti-inflammatory, antibacterial and analgesic properties, and an added ability to tone and improve skin texture. As Hydrosols are safer and gentler than pure Essential Oils, it is a great choice for people with sensitive systems, including children, the elderly and even pets. Frankincense Hydrosol can be used daily as a refreshing skin-toning facial spray that will leave your skin with noticeable softer, more delicate texture. Boswellia Hydrosol can also help deepen breathing by opening the airways, drying mucus in the lungs and expelling phlegm. Although dilution is still recommended for children and pets, hydrosols are less concentrated and therefor do not need dilution for use. The hydrosol can also be used to prepare the mind for prayer, meditation or yoga. The fresh scents deepen the breath and helps the heart connect with peace. Meditation sprays containing the hydrosols, aids us in finding the solace many of us need in our stressful lives. How do I use Frankincense Hydrosol? As a toner Combine 50ml Witch Hazel (non-alcoholic), 25ml Rose Water and 25 ml Frankincense Hydrosol in a 100ml spray bottle. Spritz on a clean skin after cleansing to balance and hydrate the skin. A few drops of your favorite essential oil can also be added should you prefer. Oils that are beneficial to the skin includes Carrot Seed, Sandalwood or Sweet Orange to name a few. Always shake well before use when adding Essential oils. As a compressor Since Frankincense has healing and anti-inflammatory properties, it aids as a compressor to relieve the pain from wounds or injuries. Place a washcloth in a bowl of cold / hot water for a cold / hot press, pour 100ml of Frankincense hydrosol in a cup and saturate the wash cloth. Wring out the excess liquid and apply the cloth in a desired area. The press will speed up the healing process. As a face mask Add Frankincense hydrosol to Bentonite Clay to form a natural mask. Add 1 tbs bentonite clay with 2 tbs of Hydrosol to form a soft paste. Apply liberally with a mask brush over your skin and wait approximately 5 minutes for the paste to dry, then wash the clay mix off. It is important to note that the mask must not be left on too long, as Bentonite is a volcanic ash and needs to be used with care (Longer is NOT better) and always only use wood, plastic or glass. Please do not use metal utensils with Bentonite Clay.
Frankincense Hydrosol Spray Frankincense Hydrosol, the benefits and uses Frankincense Hydrosol is produced through the steam or hydro distillation process of the Boswellia Carteri resin. Hydrosols are also known as herbal distillates, essential waters, hydrolats and herbal waters. This results in a hydrosol with a superior aroma and great properties yielding the much-needed benefits of the resin, in a gentler way than the pure essential oil. Frankincense Hydrosol is a beautiful skin-healer that boasts anti-inflammatory, antibacterial and analgesic properties, and an added ability to tone and improve skin texture. As Hydrosols are safer and gentler than pure Essential Oils, it is a great choice for people with sensitive systems, including children, the elderly and even pets. Frankincense Hydrosol can be used daily as a refreshing skin-toning facial spray that will leave your skin with noticeable softer, more delicate texture. Boswellia Hydrosol can also help deepen breathing by opening the airways, drying mucus in the lungs and expelling phlegm. Although dilution is still recommended for children and pets, hydrosols are less concentrated and therefor do not need dilution for use. The hydrosol can also be used to prepare the mind for prayer, meditation or yoga. The fresh scents deepen the breath and helps the heart connect with peace. Meditation sprays containing the hydrosols, aids us in finding the solace many of us need in our stressful lives. How do I use Frankincense Hydrosol? As a toner Combine 50ml Witch Hazel (non-alcoholic), 25ml Rose Water and 25 ml Frankincense Hydrosol in a 100ml spray bottle. Spritz on a clean skin after cleansing to balance and hydrate the skin. A few drops of your favorite essential oil can also be added should you prefer. Oils that are beneficial to the skin includes Carrot Seed, Sandalwood or Sweet Orange to name a few. Always shake well before use when adding Essential oils. As a compressor Since Frankincense has healing and anti-inflammatory properties, it aids as a compressor to relieve the pain from wounds or injuries. Place a washcloth in a bowl of cold / hot water for a cold / hot press, pour 100ml of Frankincense hydrosol in a cup and saturate the wash cloth. Wring out the excess liquid and apply the cloth in a desired area. The press will speed up the healing process.
Screw air compressor Piston air compressor Centrifugal air compressor
Dear Friend, How are you? Our company has been operating in the auto parts industry for 24 years, supplying a wide range of high-quality products to customers worldwide. Our main products include engine bearing, piston ring, piston, oil pump, water pump, gasket, valves, and we can also supply other parts upon customer request. We pride ourselves on providing exceptional customer service and competitive prices. We understand the importance of quality control and ensuring that our products meet the highest standards. We have a team of experienced professionals who oversee the production process and ensure that each and every part meets the specifications and requirements of our customers. Thank you! We look forward to hearing from you soon. Best regards,
5597 387660/391526 389155(#624) 392621(#p664) 387284 387285 433945 432072/432969---port 432073/432970--stbd 4379409/394461 436980/435547 436859 436974 435546 436734 114822 394461 436903 437409 395882 391526 439516 439517 436860 439015 439515 433004 433003 322188 00
Fob price: Us $ 0.5 - 10, 000 / piece | get latest price Port: Xiamen Minimum order quantity: 1 piece/pieces Supply ability: 1000 piece/pieces per day Payment terms: L/c, t/t
Diameter :100mm Total length:101.15 Compression height65.
. Specification: 26.3 x 8 x 13.65 mm . Density of piston: more than 6.3 g/cm3 . Hardness: 60-70 HB . Efficient steam treatment . High precision. . 900pcs per carton . Carton size: 27.5 x 22.5 x 18.5 . Gross weight: 24.5 kg . Net weight: 24 kg . Packing dozens of cartons per pallet . 7-8 pallets per container.
Cooperates with japan company in technology. Neutral packing, olite packing or customer required packing.
Piston.
The piston parts number we have: A3907163 A3907156 C3919564 ......
Normal Standard All pistons are produced by imported acrylonitrile butadiene rubber which suit for ordinary drilling environment under the maximum working pressure 20MPa. The maximum working temperature of our piston is up to 120 íµ and it is with excellent wear resistance and good chemical corrosion resistant .The service life of the piston can reach 280 hours in ordinary drilling working environment. Strength Enhanced The material of this kind of pistons is high-intensity acrylonitrile butadiene rubber which supplied by American Dupont company and Japanese Zeon company. This kind of pistons is with good oil and wear resistance as well as super comprehensive strength, which applied to oil-based mud and higher silt content working environment under the maximum working pressure 35MPa as well as at the maximum working temperature 120íµ Normal Standard All pistons are produced by imported acrylonitrile butadiene rubber which suit for ordinary drilling environment under the maximum working pressure 20MPa. The maximum working temperature of our piston is up to 120 íµ and it is with excellent wear resistance and good chemical corrosion resistant .The service life of the piston can reach 280 hours in ordinary drilling working environment. Strength Enhanced The material of this kind of pistons is high-intensity acrylonitrile butadiene rubber which supplied by American Dupont company and Japanese Zeon company. This kind of pistons is with good oil and wear resistance as well as super comprehensive strength, which applied to oil-based mud and higher silt content working environment under the maximum working pressure 35MPa as well as at the maximum working temperature 120íµ
Pistons
Piston.
Pistons are available with various diameters ranging from 35 mm to 120 mm for combustion engines of all types and sizes with complicated crown shapes used in the automotive markets.
Piston Standard lot size , weight , dimensions