Galvanized iron wire Processing of hot-dip galvanized wire: Hongli produces good quality hot-dip galvanized iron wire from choice low carbon steel wire, through the process of wire drawing, acid washing and rust removing, annealing and coiling Hot-dip galvanized wire we produce offers excellent flexibility and softness. The zinc coating can be 100g/m2, 200g/m2 and 300g/m2. Single coil package for hot-dip galvanized iron wire can be different from 10 kg to 1000 kg. Custom orders for hot-dip galvanized wire also available
Electro galvanized iron wire Single coil package for electro galvanized iron wire can be as small as 10 kg and up to maximum 1000 kg per coil.
We supply middle and high carbon steel wires ungalvanized and galvanized of diameters from 0.20mm to 14.00mm. The galvanized wires are zinc-plated galvanized and hot-dipped galvanized. E output about 2500 m.Ton every month according to din17223-1, gb/t4357-89, jis g 3521, en10270-1, din2078-90, astm a475 standards and so on.
Galvanized iron wire can be classified into hot-dipped galvanized iron wire and electro galvanized wire according to the differences of processing. Sizes of hot-dipped galvanized wire: 8# to 36#(wire diameter ranging from 3.8mm to 0.19mm) Sizes of electro galvanized wire: 8# to 38# (wire diameter ranging from 3.8mm to 0.15mm) Applications of galvanized wire: communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc. Sizes of hot-dipped galvanized wire: 8# to 36#(wire diameter ranging from 3.8mm to 0.19mm) Sizes of electro galvanized wire: 8# to 38# (wire diameter ranging from 3.8mm to 0.15mm)
0.3mm hot dipped low carbon steel wire 1.Diameter: 0.3mm 2.T/s: 350mpa~500mpa 3.Zinc coating: 30g/m2 En 10244
Technical information: processing with low carbon steel wire, through drawing and electric galvanizing , standard wire gauge from 8# to 16#. Applications: communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc. Material: •super carbon steel •processing by drawing, hot-dip zinc-plating , standard wire gauge from 8# to 24# •thick zinc-coating layer •super in corrosion resistance •firm coating layer •custom size available ruction. See tables below for available sizes in detail: Wire gauge swg(mm) bwg(mm) metric(mm) 8 4.06 4.19 4.00 9 3.66 3.76 - 10 3.25 3.40 3.50 11 2.95 3.05 3.00 12 2.64 2.77 2.80 13 2.34 2.41 2.50 14 2.03 2.11 - 15 1.83 1.83 1.80 16 1.63 1.65 1.65 17 1.42 1.47 1.40 18 1.22 1.25 1.20 19 1.02 1.07 1.00 20 0.91 0.89 0.90 21 0.81 0.813 0.80 22 0.71 0.711 0.70
1. Material:low carbon steel wire 2. Wire diameter:0.3-5.5mm(bwg5--30) 3. Zinc coated: 18g/m²--50m² 4. Roll weight: 1kg--500kg 5. Packaging: plastic inside and hessian outside or plastic inside and woven outside 6. Minimum order: 10tons 7. Delivery time: receive deposit 30% within 12-15 days , according to client's order 8. Payment terms: pay deposit, when meet the copy b/l or at sight l/c pay the balance Packing:plastic inside and hessian outside or weaven outside
Galvanized Overheadshield Wire 1)1.6mm-4.0mm 2)500kg-800kg per coil OR Spool 3)ASTM B 498 Class A and Class B; ASTM A 475 Orbit Coil; Compact Coil Reel
Galvanized strand wire 1.It also be called by straned messenger wire. 2.Usage:as a support for the self-supporting type fig-8 aerial optical fiber cables for telecommunications. Packing with wooden drum
Zinc coated steel wire 1)composition: high/low carbon steel wire, by electrical or hot dipped zinc coating. 2)application: steel core for ascr, armoring wire for armoring cable. 3)diameter: 0.15-6.0mm 4)tensile strength: >=1250mpa for high carbon; 300~500mpa for low carbon. Z2, neat petal/big coil, wooden drum, coil
Technical Information: Processing with low carbon steel wire, through drawing and electric galvanizing ,Standard wire gauge from 8# to 16# Applications: Communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc. Material: super carbon steel Processing by drawing, hot-dip zinc-plating ,Standard wire gauge from 8# to 24# Thick zinc-coating layer Super in corrosion resistance Firm coating layer Custom size available ruction. See tables below for available sizes in detail: Wire gauge SWG(mm) BWG(mm) metric(mm) 8 4.06 4.19 4.00 9 3.66 3.76 - 10 3.25 3.40 3.50 11 2.95 3.05 3.00 12 2.64 2.77 2.80 13 2.34 2.41 2.50 14 2.03 2.11 - 15 1.83 1.83 1.80 16 1.63 1.65 1.65 17 1.42 1.47 1.40 18 1.22 1.25 1.20 19 1.02 1.07 1.00 20 0.91 0.89 0.90 21 0.81 0.813 0.80 22 0.71 0.711 0.70.
1) Size Range - 1.20mm to 5.00mm 2) Chemical Composition - C% -0.06-0.1%, Mn% - 0.40Max, Si%- 0.10Max, P&S% - 0.004Max 3) Tensile - 400-550N/MM2 (In some cases can give upto 750MM2) 4) Zinc coating - 30-140 grams/mm2 5) Coil Weight - 50-450 kgs 6) Packing - As per customer requirement. 7) Standards applicable - BN, EN, JIS, AUS etc.
Stranded galvanized steel wire 1¡Á7£5.4/1.8 ton 1. Strand wire should have the same diameter, the same intensity, and the same level of zinc coating. The diameter and the lay length should be uniform, and have no loose after cutting Strand wire should be tight; they should not be staggered, and have no breaking and bending. 2. Strand wire and the overhead ground wire of 1 * 3 are not allowed to connected, other types of strand wire should be connected with welder. The distance between any two joints shall not be less than 50m; the measures should be taken to prevent the joints eroding. 3. Mechanical Properties it should follow the 5.3 mechanical requirements in "People's Republic of ferrous metallurgy industry standard YB/T5004-2001. 4. Coating quality 4.1 Galvanized steel's surface should be coated with uniform continuous layer of zinc, without cracks and open spots 4.2 Zinc coating of the steel can have white spots, flash point and the individual accumulation of zinc layer, but can not affect the use. But the value of the local wire must not exceed 2 times as large as the positive deviation of the diameter. 4.3 The coating quality of the strand wire with the split shares should meet the following table: Nominal steel diameter MM Coating mass/(g/©O) Not less than Around the core posts The diameter should be steel The diameter should be multiple Special A A 3 1.00 180 160 20 12 1.10 1.20 1.30 200 1.40 30 1.50 1.60 180 1.70 220 12 1.80 60 2.00 230 200 14 2.20 80 2.40 240 220 100 2.60 250 2.80 270 250 130 3.00 270 3.20 280 260 3.50 290 270 150 3.80 4.00 4.4 The zinc coating should be firmly enlaced 6 laps on the mandrel in the above table, no cracking or the zinc coating layer. It can not be able to wipe with the extent of bare fingers. 5. Refer to "the People's Republic of ferrous metals industry standard YB/T5004-2001 galvanized steel wire¡±. "People's Republic of ferrous metallurgy industry standard YB/T183-2000 strand of rare earth alloy coating¡±. (B) The raw materials 1. The steel of the strand wire shall be used in the requirement of YB/T699-1999. The steel grades are 5 # or 50 #. 2. Zinc ingot, used in galvanized steel wire, should use the zinc in GB/T470 of 0 or 1. (C) Factory inspection and testing methods all the factory inspections are divided into full inspection and spot inspection. Full inspection requires checking the appearance, structure, diameter, galvanized coating mass, twist method and its quality of each steel stranded wire. 1. Inspect the surface quality of the strand by visual inspection. 2. Use the measuring tool of 0.1mm to inspect the diameter of the strand. 3. Breaking load test is required according to the standard GB/T8358-1987.
Electro-Galvanized wire Material: Low carton steel wire,Q195. Technical explanation: Electro galvanized wire gauge from BWG8-BWG32 Tensile strength is 45kg/mm2-70kg/mm2 Firmed coating layer The single roll wire without any inter-cuts of breaks Customers size is available. Characteristic¬}Application: High Zinc coating with super in corrosion resistance, firmed and well-proportioned Zinc coating, slippery surface, uses in the weaving of wire mesh and reprocess, widely used in industry., agriculture and stockbreeding etc. Package:0.3kgs to 1000kgs are available, plastic inside and weaving bag outside.
Daily binding construction use, handcraft and weaving wire mesh. 0.5kg-1000kg/coil, plastic film inside and pvc weaving outside.
Galvanized steel wire, also written as electric galvanized steel wire, or galvanized iron wire, galvanized wire can be further divided into electro galvanized iron wire and hot-dipped galvanized iron wire. Electro galvanized iron wire and hot-dipped galvanized iron wire are mainly used for weaving of fencing mesh, iron wire in construction and other application. Wire gauge swg in mm bwg in mm in metric system mm 8#, 4.06, 4.19, 4.00 9#, 3.66, 3.76, - 10#, 3.25, 3.40, 3.50 11#, 2.95, 3.05, 3.00 12#, 2.64, 2.77, 2.80 13#, 2.34, 2.41, 2.50 14#, 2.03, 2.11, - 15# 1.83 1.83 1.80 16# 1.63 1.65 1.65 17# 1.42 1.47 1.40 18# 1.22 1.25 1.20 19# 1.02 1.07 1.00 20# 0.91 0.89 0.90 21# 0.81 0.813 0.80 22# 0.71 0.711 0.70 23# to 34# also available for galvanized iron wire. Wet proof paper wrapped
Galvanized iron wire is designed to prevent rusting and shiny silver in color. It is solid, durable and extremely versatile, thus is widely used by landscapers, craft makers, ribbon manufacturers, jewelers and contractors.Its aversion to rust makes it extremely useful around the shipyard, in the backyard, etc. Applications: Yuanda Galvanized Iron Wire is widely used in industry, agriculture fields, communication equipment, medical equipment, weaved mesh, brush, tight wire, filter slice, high pressure pipe and architecture.
1í¬ Sizes: From 0.3mm to 4,77mm (For individule wire) 2í¬ Stranded wire structure 1) 7 wires: overall diameter from 0.9mm to 13.5mm 2) 19 wires: overall diameter from 1.5mm to 12mm 3--- Standard: ASTM, BS, EN, IEC, JIS, AS, etcí¡ 4--- Packing: In coil, On wooden drum/Reel. Packing: In coil, On wooden drum/Reel.
galvanized iron wire Manufacture Supplier Concrete Product Serial No.: SpecsModel: 8#,10#,12#,14#,16#,18#,20#,22# Production Place: sanqiao Technical Standards: Diameter of Wire(mm):4.0,3.5,2.8,2.2,1.6,1.2,0.9,0.7 Electro Galvanized Wire: Zinc coating>12g/m2 Product Description: Coil packing:50Kg/coil Or 25Kg/Coil Tensile strength and elongation and coil weight can be made according to the request of the customer.
In our company good can be produced according to following standards:astmú¼jisú¼b.Sú¼g.B Our products are used in such each field as building.And used for binding.Packing:in clil of 25kgs without reel. In clil of 25kgs without reel.We also can accord the customers' requirement to do the packaging in big coils and small coils.
