For 2mm-13mm Twist Drill Re-sharpening , Angle 118óX-135óX Precise Grinding Results , Precision Assurance within 0.02mm Easy to Operate , grinding a drill within 10 seconds. Special Design High Accuracy Alloy Steel Collets Accurate Grinding consumption 0.2mm High Efficiency DC motor Stable Quality GE Diamond Dust Grinding Wheel Considerable Design, Invisible Tool Box, Delicate & Friendly Use Portable Design with only weight 7 kgs 28cm X 13.3cm X 15.5cm Weight: 7Kg
For 8mm-22mm Twist Drill Re-sharpening , Angle 90óX-140óX (Optional collets and adapter for 3mm-7mm and 23mm-25.4mm drills) Precise Grinding Results , Precision Assurance within 0.02mm Easy to Operate , grinding a drill within 10 seconds. Special Design High Accuracy Alloy Steel Collets Accurate Grinding consumption 0.2mm High Efficiency DC motor Stable Quality GE Diamond Dust Grinding Wheel Considerable Design, Invisible Tool Box, Delicate & Friendly Use Portable Design with only weight 19.8 kgs. 36.5cm X 20.4cm X 22.3cm Weight 19.8kg
M Type Burner Drilling Machine
1- Drilling Diameters: 4~120mm 2- Thickness of processed glass: 3~20mm 3- Max. of processing glass: 2600x1800mm 4- Power: 2.3kw 5- Weight: 1.0 Tons 6- Occupation area: 2600 x 2600 x 1700mm (L x W x H) 7- With air compressor. 8- XINDONGYA motors (special made) 9- Auto and Manual : Up and down drilling can be drilling automatically.
Surface drilling rigs are used for blast hole drilling in construction, quarrying, and open-pit mining, covering a hole range between 80-203 mm.
Machine Capacity 38/300 Drilling Cap. 38 Face Mill 60mm End Mill 20mm Drilling Head Taper Spindle M.T. 4 Spindle Travel 240 Speeds No. Range of Spindle 8 Spindle Speed Min./Max. 70 to 2000 Feeds No. Range of Feed Manual Working Range Distance from Spindle Centre to Column Face 300 mm Max. Distance From Spindle to Work Table 500 mm Baste Plate & Column Column Diameter 108 Base Plate Diameter of Table 225*835 Base Area 520*755 No. of Slot 3 Power Drilling Motor 1.5 HP 1400 RPM Weight (kgs.) Approximate 475 kg. V-Belt No. B-58
DRILLING (M.S) 50 DRILLING (C.I) 60 BORING 80 TAPPING (M.S) 25 TAPPING (C.I) 30 DRILLING HEAD SPINDLE NOSE MT-5 SPINDLE NOS OUTSIDE DIA-METER 80 SPINDLE SLIVE DIA-METER 85 TRAVEL OF SPINDLE 240 NO SPINDLE SPEED â?? MIN/MAX 10 30-1500 NO POWER FEED 6 RANGE OF POWER FEEDS 0.08-0.6 POWER DRILLING HEAD 5 - HP MOTOR 1440 â?? 2800 RPM ELEVATING MOTOR FOR ARM 2-HP 1440 â?? RPM HYDRAULIC CLAMPING MOTOR -------- WORKING RANGE COLUMN DIAMETER 300 DIST. FROM SPINDLE TO BASE MIN/MAX 300x1200 DIST FROM COLUMN TO CENTER MIN/MAX 450x1250 DRILLING HEAD TRAVELS 680 DRILLING RADIUS 400x1400 TRAVELS OF ARM 900 BASE PLATE HEIGHT OF BASE PLATE 200 WORKING SURFACE 700x1100 NUMBER OF T-SLOT 3 WIDTH OF CAST SIDE 20 MM OVER ALL DIMENSION (L*W*H) 1790x1000x2300 WEIGHT APPROXIMATE 3000 KG.
Machine Capacity 40/50mm 38 HD 38mm LD 25mm MD 25mm MD 25mm LD 20/200 DRILLING (C.I.) 45 38 38 38 25 25 20 DRILLING (M.S.) 40 38 38 35 25 25 20 TAPPING CAP 25 20 15 20 15 15 10 DRILLING HEAD TAPPER SPINDLE MT-4 MT-4 MT-4 MT-3 MT-3 MT-3 MT-2 Quil Movement 240 240 230 240 175 155 120 SPEEDS No. Range of Spindle 8 8 8 8 8 8 8 Spindle Speed Min. /Max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 130 to 2600 80 to 3500 FEEDS No. Range of Feed Manual Manual Manual Manual Manual Manual Manual WORKING RANGE Dist. From Spindle Center to Column Face 350 300 280 250 250 230 200 Max. Dist. From Spindle to Base Plte 1030 1000 940 940 970 1050 900 Max. Dist. From Spindle to Work table 550 530 530 530 530 680 650 WORKING TABLE Table Diameter 485*485 422*422 380*380 370 Round 325*325 310*310 250*250 Baste Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800*525 680*430 630*405 630*405 580*365 370*550 480*310 No. of â??tâ?? Slots 2 2 2 2 2 2 2 POWER Drilling Motor 2HP 960 RPM 1.5 HP 1400 RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1440RPM 0.5 HP 1400RPM WEIGHT( Kgs.) Approximate 550 kg 375 kg. 300 kg. 275 kg. 225 KG. 185 KG. 110 KG V-BELT No. B-71 B-59 B-56 B-52 B-52 B-49 A-44
CAPACITY 20 DRILLING (M.S.) 20 DRILLING (C.I.) 20 TAPPING CAP. 10 DRILLING HEAD TAPPING SPINDLE M.T - 2 QUIL MOVEMENT 120 SPEEDS NO.RANGE OF SPINDLE 8 SPINDLE SPEED MIN / MAX 80 TO 3500 FEEDS NO.RANGE OF FEED MANUAL WORKING RANGE DIST.FROM SPINDLE CENTRE TO COLUMN FACE 200 MAX. DIST. FROM SPINDLE TO BASE PLATE 900 MAX. DIST. FROM SPINDLE TO WORK TABLE 650 WORKING TABLE TABLE DIAMETER 250 X 250 BASE PLATE & COLUMN COLUMN DIAMETER 74 BASE PLATE 480 X 310 NO. OF â??Tâ?? SLOTS 2 POWER DRILLING MOTOR 0.5 KG , 1400 RPM WEIGHT (KGS) APPROXIMATE 110 KG. V BELT NO. A - 44
Model KD600 - Function: drilling - Number of pully: 2 units - Drill route: 50 mm - Distance from spindle nose to the table: 120 mm - Distance from center of spindle nose to column: 104.5 mm - Column diameter: �? 46.5 mm - Bit diameter: �?1.5 - �?13 - Motor: 1/4HP â?? 1 phase â?? 4P (220V/50Hz) Model KD800 - Function: Drilling - Number of pully: 2 units - Drill route: 58 mm - Distance from spindle nose to the table: 255 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz) Model KDC800 - Function: drilling and tapping - Number of pully: 3 units - Drill route: 58 mm - Distance from spindle nose to the table: 245 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz)
PTP Working Center Machine Main Parts: 1. Vacuum dual-zone & double-position design with vacuum suction cups, can achieve fast positioning for diversified customized production. 2. The machine body structure is made of thick-walled welded square steel tube, and with tempering treatment at 5 sides, which ensure the body durable and never deformation. 3. German imported HOMAG-Schmalz countertop can move freely, which is convenient for the processing of different size workpiece. Pneumatic clamps enable the machine to process special shaped or irregular parts too. 4. Taiwan made guide rail and ball screw, high precision, long service lift, good stability. 5. Taiwan planetary reducer, with small volume, large torque, high transmission efficiency and wide range of speed reduction. 6. Centralized automatic lubrication system, can supply oil to the guide rail and ball screw at regular time and rationing, ensuring their service life. 7. Workpiece positioning cylinder guarantee more accurate positioning of each workpiece. 8. Italy HSD numerical control drilling head can finish all drilling on 5 sides of the workpiece upon one time positioning. 9. Carousel automatic tool change system, with 8pcs capacity of tools magazine, need only 8 seconds to change tools freely. 10. Vacuum table can adsorb the entire panel or point-to-point. The entire panel can be processed directly without sawing in advance. Convenient loading and unloading, shorten the auxiliary time greatly. Performance Features: 1. Be suitable for processing diversified complicated products, with wide rage of functions, including routing, drilling, cutting, side milling, sawing, etc.. 2. Break the traditional processing mode, really save time and effort. Make the production get rid of artificial dependence, significantly shorten the production process and processing time. 3. Can be interfaced with panel production line software, is one essential equipment for the customized panel furniture production line. Applicable: 1. Furniture Industry: panel furniture, office furniture, wooden doors, cabinets. 2. Wood Products: stereo box, game cabinets, computer desks, sewing machines, musical instruments. 3. Panel Processing: insulation materials, plastic parts, chemical parts, PCB, inner body of motor car, bowling track, stairs, anti-Bethe plates, epoxy resin, ABS, PP, PE, etc. carbon mixed compound. 4. Decoration Industry: acrylic, PVC, MDF(density board), artificial stone, organic glass, and other soft-metal sheets made of aluminum or copper.
Horizontal Drilling Machine -CE Europe Quality Standard Drilling Diameters: 5~140mmï¼?Thickness of processed glass: 3~25mmï¼?Power: 2.3kwï¼?Occupation area: (L x W x H) 2500*2000*2200mm
Uesd for bench&Long Hole Drilling Tools R32 series Length:915mm-3880mm Diameter:32mm Weight:6-22kg Thread shape:round
KINGS ROCK TOOLS' Integral Drill Rods, perfect for underground mining and small hole drilling, are made with high-quality alloy steel, ensuring durability and efficiency in rock drilling operations. Product: Integral Drill Rod Shank: 19x108mm , 22x108mm Length: 400mm-5600mm Bit Diameter: �?23mm-42mm Suitable Machine: Air-leg drill machine, Handheld rock drill machine Suitable rock: granite and marble Color: customized Package: wooden case Custom: bit diameter, length, can be customized according to client's requirement and drawing.
Drilling cap. In Steel 40mm Drilling cap. C. I. 45mm Tapping in M. S. 30mm Spindle center to col. 890 / 387 mm Spindle travel 235 mm Spindle nose to base 900 / 185 mm Dia. of column 165 mm Dia. of RAM 72 mm Size of table 380 x 280 x 275 mm Overall base size 1270 x 745 x 200 mm No. of spindle speed (8 speed) 90 to 2630 RPM Taper in spindle base MT-4 Machine area of base 1200 x 605 mm Drill motor (gear drive) 1.5 HP & 1 HP Total height 1900 V-Belt size A-24, B-46 Net Weight 890 Kgs
SPECIFICATION : VMT 38 Drilling cap. In Steel 38 MM Drilling cap. C. I. 45 MM Tapping in M. S. 20 MM Spindle center to col. 320 MM Spindle travel 240 MM Spindle nose to base 1000 MM Dia. of column 120 MM Dia. of RAM 72 MM Size of Sq. Table 375 x 475 MM Overall base size 720 x 470 MM No. of spindle speed (8 speed) 90 to 2630 Taper in spindle base MT-3 Machine area of base 485 x 445 MM Drill motor (gear drive) 1.5 HP 1440 RPM Total height of machine 1800 V-Belt size B-58 Net Weight 325 Kgs.
glass drilloing machine for sale
Automatic Seed Drill Machine for 100% Satisfaction cultivation in different Soil.
Redial drilling machine With 1900 mm length arm
