1000ml Automatic Non-contact Induction Soap Dispenser Induction Dispenser Foam Dropping Spray Type Hand Washer Disinfectant Water Spray Dispenser Feature: 1. Adopt advanced infrared human body induction technology 2. Non-leakage spray-out liquid, dripping foam type 0.7ML each time outflow, spray type 0.3ML each time, after professional testing 200,000 times without leakage 3. 1000ML large capacity soap dispenser with adjustable liquid output, 2 levels adjustable 4. Three kinds of liquid discharge methods, spray, drip, foam 5. Automatic manual sensor solution to avoid secondary cross infection 6.100-240V power supply version or 8x AA alkaline battery version Description Packing: color box Material: ABS plastic Dimensions: 12.3x11.4x26.2cm Weight: 1000g Capacity: 1000ml Color: white and black Liquid output: foam type drop type is 0.7ml or 1.4ml, spray type 0.3ml or 0.6ml Battery version: 8 AA batteries (excluding battery) External electrical version: 100-240 V power adapter or battery Type: foam/liquid/spray (three types) Plug: US regulations, European regulations 3 kinds of liquid discharge methods: A spray: The automatic hand disinfection machine flows out in the form of spray, puts disinfectant, and disinfects the hand or objects B drip: The liquid of the automatic drip soap dispenser flows out in the form of drip, which can be used with ordinary/gel type hand sanitizer and detergent. C foam: The liquid of the automatic foam soap dispenser flows out in the form of foam, and a special foam soap liquid needs to be used!!
Ultra-sharp, tri-bevelled, anti-coring needle; Stainless steel cannula; Metal insert increases needle strength for animal health applications; Coated with a Silicons Polymer; Sterile; Two pieces rigid pack; Cartridges are color-coded to follow industry standards providing easy gauge Identification OTHER SIZE ARE ALSO AVAILABLE
Socorex Acurex 501.051 0,4 -5 ml Dispenser / Wheaton W844057 Brand New Never used in its original box Socorex/ Whaton compact dispenser with glass 1000 ml container. 0.4- 5 ml dispensing capacity -Excellent chemical resistance and safe handling -No metal components -Fully-protected dispensing mechanism -Very compact, ideal for refrigerator storage -Autoclavable at 121 C -GS T V approved
Y&D7300N dispensing robot is a kind of newly designed popular machine which is quite easy to learn and operate by the teach pendant. With the interpolation function, all the axis can make points, drawing lines, arcs, some complicated draws, etc. With the quite powerful software, the machine is quite easy to operate, one can learn and make program is a few minutes. Item Y&D7300N X/Y/Z working area (mm) 300/300/100 Load worktable 11.0kg / 6.0kg Speed PTP X&Y/Z (mm/sec) 800/350 Repeatability +/- 0.02mm / axis Resolution 0.01mm/axis Data memory 100 programs, 4000 points/program Data storage CF card Program Display Teach pendant LCD Operation system PTP (point to point) & CP(continuous path) Interpolation Function 3 axis Program method Teach pendant I/O signals 8 inputs / 8 outputs External interface RS232 Power supply AC 100-230V,300W Working Rlative Humidity 20-90% no condensation Operating temperature 10C~40C Motor system Micro stepping motor Dimensions 485*505*610 Net� Weight 34kg
Y&D7200N full automatic dispensing robot is compact in size, sturdy and durable in using. When working, it can collocate with different valves, barrels, tips, etc. This kind of machine is applied to all kinds of automation which can be used in a worldwide area. Using industry leading software, it is quite easy to learn and operate through the teach pendant. Users can learn and make programs in a few minutes. Item Y&D7200N X/Y/Z  working area (mm) 200/200/50 Load worktable 5.0kg / 3.0kg Speed PTP X&Y/Z� (mm/sec) 500/350 Repeatability +/- 0.02mm /axis Resolution 0.01mm/axis Data memory 100 programs, 4000 points/program Data storage CF  card Program� Displayï¼?Teach� pendant� LCD Operation� systemï¼? PTP� (point� to� point)� &� CP� (continuous� path) Interpolation linear/circular  axis Program method Teach pendant I/O signals inputs 8 outputs External interface RS232 Power supply AC 90~260V 125W Operating temperature 10C~40C Working Rlative Humidity 20-90% no condensation Motor  system Micro stepping motor Dimensions 385*380*500 Net� Weight 23kg
cartridge / sausage
CAS : 617-86-7 HS Code : 2931900090 200KG/DRUM Product Name Fast Delivery Triethylsilan e / Silan e, triethyl- / CAS 617-86-7 CAS NO. 617-86-7 Appearance Colorless liquid Melting Point -157�°C Boiling Point 107-108 �°C Density 0.728 g/mL at 25 �°C Storage Store below +30�°C Application Pharmaceutical intermediates; Organic silicon; Organometallic reagent; Organic raw materials; Organic intermediate material Usage Triethylsilan e is used as an organic synthesis and pharmaceutical intermediate.
GLPOLY XK-G30 is high performance, low thermal impedance thermal gel with thermal conductivity of 3.0W/mK, it is ideal for AI equipment. Some suppliers marked for AI product thermal managementon specification and deceived customers with fake data, unfortunately, long-term reliability test will tell the truth. IDRIVERPLUS, a famous service robot company, the engineer consulted us about thermal management materials for autonomous sweeping vehicle. He stated definitelyfirstly, thermal conductivity is 3.0W/mK or greater, secondly, 10-year service life. Most of suppliers failed to satisfy these two requirements. But to GLPOLY, these were not barriers any more, we were not bragging, we showed customer the test of object. GLPOLY intrduced automated production lines, eliminating artificial error and keeping product consistent. It is cartridge package desiged for automated dispensing production, decreasing time consuming hand assembly, reducing labor cost and improving productivity. GLPOLY takes Bergquist, Chomerics Therm-A-GAP GEL30 and Laird Tflex 508 as benchmark, providing quality product and design flexibility.
(1) More than 20% profit can grow, because using GLPOLY thermal gap pad. (2) Market share will increase 20% , from purchasing the high stability quality product made by GLPOLY (3) What GLPOLY can provide, no second in China. XK-G30 is a necessary material for the thermal conductive structure of service robots, drone and other AI smart technique. However, not all thermal conductivity gel can definitely be used in AI technology. It should be a veritable performance of thermal conductivity, also has a reliable service life, that can be used more than 8years. GLPOLY is one of the few thermal materials manufacturers that can really meet the needs of high-end applications. IDRIVERPLUS, a well-known service robot design company in China, found GLPOLY when they were designing the unmanned cleaner. Their requirements are very clear, thermal conductivity >3.0 w/m �· k, with a service life of more than 10 years, also reach the flammability UL94 V-0. These three indicators can actually brush off many similar products, because once doing the reliability testing, these similar product will not have an excellent test result like GLPOLY. 5 pipes of XK-G30 samples were soon delivered to Beijing, for a month-long technical examination, meanwhile, GLPOLY also did aging testing and silicone oil bleed out testing in its own testing room. As expected, XK-G30 satisfied the requirement, and received the "Adoption". The advantage of GLPOLY XK-G30: (1) As a conventional product of thermal conductivity gel, never solidify, low density and low thermal impedance, much better than normal thermal grease (2) Producing by automatic line, ensures product consistency. (3) 55ml/300ml Tube package, suitable for customerâ??s automatic dispensing, reduce cost the hand operation. (4) Thermal conductivity 3.2 w/m k, not lower than 3.0 w/m k.
Although technologies over electrical vehicle has been developed for years, we still dont have a perfect thermal management solution over electrical vehicle battery pack. Besides the reasons of battery pack structure, I think thermal interface materials has a great impact on thermal management. The market of thermal gap filler(thermally conductive adhesive) looks very chaotic, many thermal gap filler was called thermal adhesive for structure bond, actually, they are still thermal silicone encapsulant in essence. Moreover, some engineers dont know thermal materials very well and state requirements unclear, resulting a unsatified trial and failed impression on domestic brand. Many manufacturers only concerned to thermal conductivity and laid less attention on other parameters, such as curing time, curing status, bond strength, maintaince. GLPOLY thermal gap filler (thermally conductive adhesive) XK-D25H is epoxy based, high performance and good electrical insulation thermal adhesive which had been improved from traditional epoxy adhesive. Mix ratio is 1:1 by volume, just a few of manufacturers can accomplish it, for example, 3M thermally conductive epoxy adhesive mix ratio is 2:1. It is truth that data can be checked out from website. GLPOLY thermally conductive adhesive (thermal gap filler) XK-D25H features 1) short curing time, draft in 5 minutes and become steady in 12 hours, 2) semi rigid after curing, protect battery modules by dampening vibration, 3) Improved bond strength greater than 3.7Mpa, 4) mix ratio 1:1 by volume, fit for dispensing equipment. One of battery customers tested and compared materials among five suppliers, they checked thermal conductivity, electrical insulation, curing time and bond strength and so on. Two of suppliers were eliminated because of longer curing time that it is unfavourable for process. In the high temperature aging test, GLPOLY thermally conductive adhesive (thermal gap filler) XK-D25H performed normally, the variety of parameters are less than 10%. The competing one failed because of week bond strength, and moreover, its mix ratio is 2:1 which is unfavourable for customers robot system. Besides stable thermal performance, GLPOLY thermally conductive adhesive provides reliable physical ptoperties. 1)filling gaps under low pressure, 2) low stress, 3) strong structure bond. GLPOLY thermal materials has been applied in military equipment because of high performance and reliable properties. Thermal gap filler is on trial in battery pack in four major enterprises. GLPOLY thermal materials help you keep you devices cool and well performed.
URJA WATER BASE DUCT SEALANT is a fast setting, elastomeric water base joint sealant for low medium & high velocity heating & air conditioning ducts. It has very good adhesion to galvanize, aluminum or mild steel metal ducts. It gives good flexible seal against air leakages and do not require reinforcing tapes or mechanical fasteners. URJA WATER BASE DUCT SEALANT is suitable for Cleanroom and Pharmaceutical Projects. It passes the Flammability test as per UL94 HB class test when tested at ARAI, lab, Pune. Also it is food grade material when tested as per IS & USFDA test method at FOOD HYGENE & HEALTH LABORATORY.
Features Superior clarity. Easy to use – one part, no mixing required. Can be dispensed with an ordinary caulking gun. Cures to a strong, flexible seal capable of withstanding movement in and around the joint. Acetic cure; fast cure. Can be applied in any season. Excellent resistance to weathering, uv light, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents. Non-slumping; can be used in vertical and overhead joints. Choice of colors: clear, white, gray, etc General purpose, acetic cure silicone sealant with long term durability Applications • glass aluminum • painted surfaces ceramics •fiberglass non-oily wood, etc .
Product Description - Antimicrobial Soap Purell Healthy Soap Foaming 1,200 mL Dispenser Refill Bottle, 2 Per/Cs Mfr#7878-02 Price of product ( USD price or FOB price) - $169.58 Product origin - USA Key Specifications/Special Features - SKU:7878-02 Minimum Order Size - 100
EC-126-8, this automatic glue dispensing machine is specially designed for fluid, adhesive, two parts materialsâ?? dispensing / potting / coating. The glue dispensing machine can be used in different productions. It may apply sealant, adhesive, and other fluid materials to LED, solar panel, electrical appliances, automotive components, telecom systems, batteries, power tools, toys, cosmetic, consumer electronic items in the manufacturing process. The benchtop glue dispensing machine able to dispense a big variety of adhesive, such as UV, TIM, EMC, bonding glue, epoxy, silicone, quick dry glue, or others. Please note that, change of valve maybe needed as well. Application base on material. The above data is for reference only, for other custom Wholesale glue dispensing machine, please feel free to contact us, our in-house software and hardware engineers are ready to provide proposal free of charge.
DH-3310D-KG3 Desktop Industrial Robots with rotary Dispensing valve Patent Number ZL 2010 2 0120765.6 FEATURES 1.Feed system is 310ml cartridge silicone, Good for storage material by 310ml,400ml,500ml,600ml cartridge hard packing. 2.Ceramic Rotary dispensing valve Suitable for high viscosity fluids,Constant uniform bead dispensing,longer service life 3.High precision liquid controller system. Application Good for storage material by 310ml cartridge hard packing. Precision dispensing silicone on the product. Liquid Material: adhesive, glue, silicone, RTV, sealant,paste adhesive Packing capacity:310ml,400ml,500ml,600ml cartridge hard packing Help you more: · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste · Create more economic benefits for the enterprise. Specification ITEMDH-3310D-KG3 X/Y/Zworking range300 x 300 x 100mm Dimensions (WxDxH) mm500 x 580 x 610 Weight35kg StandardCE Approved XY/ZMaximum Load8 kg / 2 kg Repeatability0.02mm XY/Z Speed600/300 mm/Axis Data memory capacity999programs Edit programmingTeachpend Drive SystemMirco-stepper motor TransmissionTiming Belt/ Precision Linear Guides Edit programmingteachpend Safety protectionOptical coupling sensor I/O Signals4 Inputs / 4 Outputs Patterns3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power SupplyAC110V/220V Internal conversion Working Temperature0 40 Relative Humidity 20 90% (no condensation)
DH-3310D-K Desktop Industrial Robots syringe micro dispensing Patent Number ZL 2010 2 0120765.6 FEATURESï¼? Syringe micro dispensing 1.Feed system is syringe(3cc,5cc,10cc,30cc,55cc.300cc option) 2.Suitable for a wide range of liquid material dispensing 3.Liquid dispensing controller system with Suck-back ensures no dripping Applicationï¼? Liquid material : glue, silicone, RTV, cyanoacrylate, grease, anaerobic, and UV cure resins. Packing capacity: toothpaste, bags (bulk), syringes, namesake fizzy, small cans, etc. Application · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste · Create more economic benefits for the enterprise. Specificationï¼? ITEM DH-3310D-K X/Y/Zworking range 300 x 300 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 Weight 35kg Standard CE Approved XY/ZMaximum Load 8 kg / 2 kg Repeatability 0.02mm XY/Z Speed 600/300 mm/Axis Data memory capacity 999programs Edit programming Teachpend Drive System Mirco-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit programming teachpend Safety protection Optical coupling sensor I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation)
TH-206H-KG3 Gantry Benchtop robot with rotary Dispensing valve Patent Number ZL 2010 2 0120765.6 FEATURES 1.Feed system is 310ml cartridge silicone, Good for storage material by 310ml,400ml,500ml,600ml cartridge hard packing. 2.Rotary dispensing valve Suitable for high viscosity fluids,Constant uniform bead dispensing 3.High precision liquid controller system. Applicationï¼? Good for storage material by 310ml cartridge hard packing. Precision dispensing silicone on the product. Liquid Material: adhesive, glue, silicone, RTV, sealant,paste adhesive. Packing capacity:310ml,400ml,500ml,600ml cartridge hard packing Specification ITEMTH-206H X/Y/Zworking range300 x 300 x 100mm Dimensions (WxDxH) mm600 x 520 x 610 Weight34kg StandardCE Approved XY/ZMaximum Load10 kg / 3 kg Repeatability0.02mm Resolution0.001mm XY/Z Speed800/350 mm/Axis Data memory capacity9999programs Display wayLCD display Drive SystemPrecision micro-stepper motor TransmissionTiming Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals4 Inputs / 4 Outputs Port allows for dataUSB port allows for data transfer between PC Patterns3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power SupplyAC110V/220V Internal conversion Working Temperature0 ï½?40 Relative Humidity20ï½?90% (no condensation) Help you more: · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste · Create more economic benefits for the enterprise.
Description: The Silicone duct made by Yeedah is different from other common type of silicone hoses in same material. It is a kind of High temperature duct, flame retardant, chemical resistance, stand for very high temperature. It is also used in different industry. Details as below: Material: � Wall: the wall of the silicone duct is 2 layers silicone coated glass fiber fabric � spiral: stainless spring steel wire is hidden between the 2 layers, hi-temperature glass fiber cord is spired around the surface of the duct. Properties: � The silicone duct has very good heat resistance � It is leak-proof; kink-proof � The long life time of this duct is around 5~10 years in normal working condition � It has smooth interior � Bending radius is quite small. � Silicone duct is normally in red & black.color. Temperature range: � -70 °C approx. to +260 °C approx. � short time to +310 °C approx. Applications: � as conductor of hot and cold air. � for granulate dryers in the plastics industry. � for printing machines, blowers and compressors. � for exhaust gas technique, engine construction, engine warming, aircraft construction and military construction. In one word, this Silicone duct could be used anywhere produces hot air. The performance is very good, and lifetime is quite long. In normal working environment, it could be used up to 10 years or more. See frequent questions for this product, pleaseclick here.
Silicone cartridge 300ml plastics silicone cartridge. Weight-48.5gms. Od-48.8mm. Id-46.1mm. Lenght(till shoulder)-215mm.