VZEN IND IV (also known as Light oil, LVFO or Low Viscosity Oil) is a fraction obtained from petroleum distillation. VZEN IND IV is a light viscosity dark colour liquid fuel that is burned in a furnace, heater or boiler for generation of heat or used in an engine for the generation of power. It can be used in place of Light Diesel Oil (LDO) as it has higher GCV & Low Cost. VZEN IND IV is the most economical fuel available for industrial application. It is the most used fuel oil for industrial heating applications in Metal & Steel industry, Engineering and Leather industry. Our range of all products is widely appreciated by our clients.
VZEN IND III is a blend of distillate fuel with a additives. VZEN IND III is commonly used as a fuel in industrial and commercial applications. It is a low-sulphur distillate fuel oil derived from hydrocarbon oil through a distillation process and filtered to meet the need of Industrial boilers and give best performance. It has high Gross Calorific value. It is recommended for all types of Industrial Heating application. VZEN IND III is low viscosity oil, high flash point and low pour point to give best performance throughout the year. It is pure petroleum-based oil and has very low carbon low Sulphur and low ash content. Our range of all products is widely appreciated by our clients.
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)
Diesel Powering your journey with efficiency and reliability. Our premium diesel fuel is designed to optimize engine performance while minimizing emissions. With a blend engineered for maximum power output and fuel efficiency, it\'s the smart choice for drivers seeking both performance and environmental responsibility. Whether you\'re hitting the highway or navigating city streets, trust our diesel to keep your engine running smoothly mile after mile.
CIF EN-590 10ppm Diesel -12 Month Contract Production Procedures: Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Product: EN590 Diesel 10ppm Origin: Kazakhstan - (Our own refinery) Delivery: CIF to any safe world port MOQ: 25mt Quantity & Fixed Pricing: 25mt= $640 50mt= $635 100mt=$630 Commission: $5 per MT starts with you. (sell side closed) CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellerâ??s approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps.
Quantity: Min 200,000,000 GAL SPOT & Annual Contract SPOT & Annual Contract Condition of Delivery: CIF Price: $0.75 USD Gross $0.70 USD NET Quantity: Min 200,000,000 GAL SPOT & Annual Contract SPOT & Annual Contract Condition of Delivery: FOB Price: $0.80 USD Gross $0.75 USD NET. Commission: USD 2 Buyer side/USD 2 Seller side
10PPM,500PPM,5000PPM, High Sulphur Price of product ( USD price or FOB price : FOB Jebel Ali, USD 600- USD 640 PMT Product origin : GCC / UAE Key Specifications/Special Features : On Request Minimum Order Size and Packgaing details : 100MT INTO DRUMS /FLEXI / ISO TANKS
DESIEL GAS OIL ULTRA â?? LOW SULPHUR DIESEL 50 PPM/ EN590 Minimum Quantity: 100,000MT â?? 500,000MT â?? Per Month FOB Price: Gross: $ 300- Net $ 290 /CIF Price: Gross $ 340- Net $ 330 Quality: SGS or similar inspection Commissions: $5 Buy side (open) Seller side $5 (closed) Payment Term: MT103 Loading Port: Vladivostok / Novorossiysk/ Rotterdam
PRODUCT: Diesel Fuel Oil EN590 10ppm/500ppm QUANTITY: 50,000 MT as Liftable Quantity PRICE: US$225.00 Gross / US$215.00 Net per MT
RUSSIAN ORIGIN DIESEL GAS OIL EN 590 (10PPM) Minimum Quantity: 50,000 Metric Tons First Trial Maximum Quantity: 500,000 Metric Tons x 12 Months FOB Price: Gross USD$220.00/ Net USD $ 215.00
RUSSIAN ORIGIN DIESEL D6 OIL GOST 978-40 Minimum Quantity: 100,000 Gallons First Trial Maximum Quantity: 2,000,000 Gallons x 12 Months FOB Price: Gross USD $ 0.78 / Net USD $ 0.74.00
PRODUCT: DIESEL D2 OIL GOST 305-82 Price CIF AWSP: Gross US $215 / Net $200 Price FOB Rotterdam: Gross US $205 / Net $190 FIRST TRIAL LIFT: 50,000 MT SUBSEQUENT TRANCHE: 500,000 MT PER MONTH X 12 MONTHS WITH POSSIBLE 60 MONTHS SUBJECT TO CONFIRMATION. QUANTITY: Min 50,000 MT / Max 500,000 MT
(1)Introduction and Application DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4. (2)Dosage Reference Quality Level Additive Dose (m %) CJ-4 15 CI-4 13 (3)Quality Index Item Typical data Test Method Flash Point (Open), °C 180 GB/T3536 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, % (m/m) 1.5 SH/T0297 P , % (m/m) 0.64 GB/T0296 Zn, % (m/m) 0.72 SH/T0226 N , % (m/m) 0.52 SH/T0224 Sulphated Ash, % (m/m) 6.5 GB/T2433 TBN, mg KOH/g 49 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 195 Kg/Iron Drum .
(1)Introduction and Application DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4. (2)Dosage Reference Quality Level Additive Dose (m %) CJ-4 15 CI-4 13 (3)Quality Index Item Typical data Test Method Flash Point (Open), °C 180 GB/T3536 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, % (m/m) 1.5 SH/T0297 P , % (m/m) 0.64 GB/T0296 Zn, % (m/m) 0.72 SH/T0226 N , % (m/m) 0.52 SH/T0224 Sulphated Ash, % (m/m) 6.5 GB/T2433 TBN, mg KOH/g 49 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 195 Kg/Iron Drum .
Diesel Gas Oil D2 or S500 GOST
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives Specifications for Gasoil D2 L-0.02/62 / GOST 305-82 COMPONENT UNIT MIN MAX Density at 20C Kg / m�³ 0.870 Colour 2.0 Flash point, PMCC Deg C (�°C) 57 62 Kinematic viscosity at 20C C ST 3.0 6.0 Pour point Deg C (�°C) (*) -10.0 Cloud point Deg C (�°C) (*) -5.0 Mercaptan sulphur 0.01 Acidity, mg / 1000 cm�³ 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.02 0.05 Copper corrosion 3hrsat50 deg C (typical) 1 A CCR on 10% Residues %wt 0.02 Cetane index 45 Distillation range : - 50% Recovered Volume deg C (�°C) 280 - 90% Recovered Volume deg C (�°C 360 Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)
We sell Oil and Gas Products Wholesale Diesel gas d2 gost 305-82 Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6 We are an oil and gas company Agents, Facilitators and Mandate; we source crude oil for Refineries and large volume buyers, and other petrochemicals like AGO, LPFO, PMS, DPK and other Russia product origin listed below for the upstream and downstream sectors consumption. 1) D2- Gas Oil (Diesel) Lo.2-62 Gost 305-82 , Quantity- 50,000mt 500,000mt For Cif And Fob, Spot And Contract Basis. 2) Jp54 Aviation Kerosine Colonial Grade 54 Russia Origin, Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 3) Aviation Turbine Fuel Jet A-1 Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 4) Bitumen Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 5) M100 Mazut 100 Gost 10585-99 And 10585-75, Quantity- 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 6) Liquid Petroleum Gas.Gost 20448-90, Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 7) Liquified Natural Gas, Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 8) Russia Sn 150 Base Oil, Quantity - 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 9) Russia Sn 500 Base Oil, Quantity 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 10) En590 Biodiesel, Quantity 50,000mt- 500,000mt, For Cif And Fob, Spot And Contract Basis. 11) Automotive Gas And Oil (Ago), Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 16) Russia Export Blend Crude Oil (Rebco), Quantity 1,000,000bbls 6,000,000bbls, For Cif And Fob, Spot And Contract Basis.
Technical Data Sheet Included In Images. Other diesel specifications available upon buyer\'s request.
Light Diesel Gasoline Oil Purifier for Series TYB Gasoline Diesel Oil Purifier Light Diesel Gasoline Oil Purifier for Series TYB Application: It is for treating the diesel oil,fuel oil,gasoline oil for the generators. This machine integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large amount of water without heating, even 50% water, creates the fastest dehydration speed, It can quickly separate water from the oil, which even contains half water, to attain cleanness of NAS 6 grade, Convenient using with the go-cart model designed. In a word, it is be used for fast removal of water and sediment in fuel oil or light oil which contains large amount of water. It can not only remove the impurities, water, and acid matters, organic and inorganic acid effectively, but also can remove guargum,surf, colloid and other sludge can be removed together. Feature: 1 TYB series purifier adopt special oil water separator which requires no heating, offering 20 times higher water removing efficiently than over other types of purifiers. 2 As no heating is needed, the additives in the oil are well prevented from degradation or deterioration. 3 Easy-to-operate, water can be discharged online automatically without the presence of operators. 4 Low operation cost, 20%-40% lower than vacuum purifier, centrifugal purifier and filter press. Technical Parameters: Parameters Unit TYB-10 TYB-20 TYB-30 TYB-50 TYB- 80 TYB- 150 TYB-200 TYB-300 Flow rate L/min 10 20 30 50 80 150 200 300 Working pressure Mpa 0.3 Working noise Db(A) 65-75 Running hours without malfunction H 4000 Continuous running hours H 150 Water content ppm 3 Particle Size um 0.5 Cleanliness NAS 6 Power KW 0.75 0.75 0.75 2.2 2.2 3 3.5 3.8 Size mm 700*570*1200 700*600*1200 800*600*1200 850*650*1200 900*680*1200 1100*750*1200 1300*750*1200 1400*800*1200 Weight Kg 80 90 105 135 150 185 200 230 Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
