Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Rail Cant Measuring Device is a High Quality Railway Measuring Tool / Cheapest Rail Bottom Slope Measuring Instrument .The main part of the wheel tread is the 1:40 slope.To make the top of rail fore evenly under the load of a conical tread wheel.Rail should be tumbling-in not vertical.the inner inclination of therail is called rail bottom slope.The product is easy to use,both in the daytime and at night.It is an ideal measuring tool for public works and engineering departments.
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head
Digital Track Level Gauge for Cant Superelevation Measurement $800.00 / unit 1 unit Railway Portable Digital Rolling Track Gauge Reader for Track Geometry Measurement $6,000.00 / unit 1 unit Railway Digital Track Level Gauge for Switch and Crossing Measuring $1,050.00 / unit 1 unit Analogue Rail Profile Wear Gauge for Rail Wear and Side Cut Gauge $550.00 / unit 1 unit Digital Switch and Crossing Gauge for Switch Rail Wear Measurement $650.00 / unit 2 units Digital Rail Frog Vertical Wear Gauge for Turnout Maintenance and Inspection $800.00 / piece 1 piece Digital Rail Profile Gauge for Rail Head Wear and Side Cut Measuring $650.00 / unit 1 unit
The railway digital track gauge is mainly used for the measurement of railway track gauge, superelevation, inspection interval, and back protection distance. It can be used for public works maintenance, overhaul, engineering survey and other relevant departments' line operations. The instrument has fast measurement speed and is easy to use. It can be used both day and night. It is an ideal measurement tool for public works and engineering departments. GJC-JGX-L type railway digital display gauge gauge can be divided into grades: 0 grade, 1 grade, 2 grade.The corresponding models are GJC-JG0-L, GJC-JG1-L and GJC-JG2-L.
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description Lithium Battery Powered Rail Bolt Wrench Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
NLB-600 universal power wrench can quickly and easily tightens and loosens all wrenched joints along the track. Accurately controlled and stable. This machine uses gasoline engine as power, the output shaft is single -head, single-speed, forward and reverse adjustable, output torque can be manually adjusted and accurately displayed, the whole machine is easy to operate, safe and reliable, and convenient to go up and down, and can be equipped with lighting lamps for supply Lighting at the sleeve head during night work. Petrol engine output power 4.8 kW/3600rpm Output shaft speed 130 rpm Torque 20-450 N.m ( stepless adjustment) 600 N.m ( instantaneous ) Size 1775x525x690 mm Weight Machine 88 kg Wrench support rod 4 kg Socket specifcation Suitable for hexagon nuts of M22, M24, M27, M30 Average noise emission 85 dB(A)
Product Description NLB-500 Portable Rail Impact Wrench NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification Model NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque â?¥500N.m Peak torque 1000N.m Weight 18kg
NLB-300 Rail Impact Wrench with One Socket NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nm Max. fasten torque 150 Nm Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description Rail Web Width Measuring Device is a kind of measuring instrument for measuring the rail web width. Specification Model LJ-GK-A Type Rail Wed Gauge Material Stainless Steel Measure range 0-120mm Accuracy 0.01mm
Product Description Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-20 Type Versine Measuring Device Material Aluminum Dimensions (L x W x H) (mm) 100*20*50mm Measure range 20M Weight 157G
Product Description Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-50 Type Versine Measuring Device Material Plastic Dimensions (L x W x H) (mm) 133*66*26mm Measuring Range 50m Weight 210kg
Product Description Contact rail gauge, also called third rail gauge, is a special measuring instrument for measuring the guide height of contact rail (the vertical distance between the horizontal surface of contact gauge track) and the pull out value (the horizontal distance between the inner surface of contact gauge track) in rail transit. Specification Model LJ-JCG-I Type Third Rail Measuring Gauge Material Aluminium Alloy Dimensions (L x W x H) (mm) 1650*120*250mm Vertical Measure range 1418±25mm or customize Horizontal Measure range 100±10 mm or customize Accuracy 0.5mm
Product Description Digital Rail Straight Edge Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear, it includes reference positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion, side abrasion measured in feet, its structure is simple, intuitive and accurate measurement data, and upper and lower rapidly, operator safety, its light weight, convenient to carry. Benefits Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracy,easy to operate,LCD digital display etc. Specification Model LJ-ZD-I Type Digital Straight Edge Material Carbon Steel Dimensions (L x W x H) (mm) 120*12*24 cm Measurement range ±5 Indication error ±0.06 Measuring length 1000
Product Description Rail Laser Versine Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device . Benefits 1.Quick Installation The operator can put this device on the track in seconds 2.Saving money in repeat work and accuracy 30m at a time with 99.99% reduction on repeat works and rapid deployment 3. Vernier adjustment knob ensuring accurate readings The vernier adjustment knob assist the operator to ensure a perfect horizontal position ensuring accurate reading . 4. Stored in a dedicated protective case ,Easy to carry Specification Laser measure distance 30m Lser center spot 10mm 30m distanceare Point range horizontal 30+60mm vertical 30+60mm target positioning device and moving positioning target device resolution 2mm 1 Battery capacity (laser transmitter) Continuous use for 4 hours
Product Description Platform Gauge Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface and platform plane.(Customizable) Specification Model LJ-TC-I Type Platform Gauge Horizontal measure range 1500-2200mm Height measurement range 200-1300mm or customize Accuracy 1 mm
Product Description Magnetic Pointer Rail Thermometer Magnetic Pointer Rail Thermometer is used to measure the temperature of rail. rail thermometer is not only dedicated to measure the temperature of the railway rails, but also can measure the air temperature and the surface temperature of other objects. Specification Model JGGW-II Type Rail Temperature Thermometer Material Plastic Dimensions (L x W x H) (mm) 10*8*3cm Temperature measuring range -40~+70 Division value 1.0 Accuracy level 1.0
