NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
A permanent magnet synchronous motor (PMSM) is a combination of coil winding in its stator core and permanent magnets in its rotor core. It has a better power density than an induction motor. It features a permanent magnet rotor and windings on the stator, just like a brushless DC motor. However, the stator construction with windings designed to create a sinusoidal flux density in the machine's air gap is similar to that of an induction motor. Due to their advantages, permanent synchronous motors are a very popular solution in electrical drives. PMSM exhibits best performance because of its characteristics such as high power density, high efficiency, lower mass and lower moment of inertia. PMSM Motor Construction And Working Opeartion The construction of a PMSM includes a stator with three-phase windings and a rotor fitted with permanent magnets. The stator windings are typically arranged in a sinusoidal distribution to create a rotating magnetic field when energized with alternating current. Let us understand how a PMSM motor works. â?¢ When three-phase alternating current is supplied to the stator windings, it creates a rotating magnetic field. The rotor, which contains permanent magnets, is attracted to the magnetic field produced by the stator windings. As a result, the rotor begins to rotate synchronously with the rotating magnetic field produced by the stator. â?¢ The term "synchronous" in Permanent Magnet Synchronous Motor refers to the fact that the rotor rotates at the same speed as the rotating magnetic field produced by the stator. This synchronous operation ensures efficient energy conversion and enables precise control of the motor's speed and torque. â?¢ PMSMs are often controlled using sophisticated motor control algorithms, such as Field-Oriented Control (FOC) or Direct Torque Control (DTC). These control techniques allow for precise regulation of the motor's speed and torque, as well as smooth operation across a wide range of operating conditions. For detailed consultations and to explore the range of PMSM motors, contact Windmax Powe
ND-1 portable tamper is a special machine for ballast tamping on railway lines and turnouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballast. The impact force is large and the tamping effect is good. The whole machine is small in size, ight. in. weight, and convenient. to go up and down, which can effectively guarantee driving safety during operation.
ND-1 portable rail tamper is a special machine for ballast tamping on railway lines and turnouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballast. The impact force is large and the tamping effect is good. The whole machine is small in size, light. in. weight, and convenient. to go up and down, which can effectively guarantee driving safety during operation.
Automatic Collar Type Powder Packing Machine offered comes with support of servo drive for filling and handling of laminate pulling through friction belts & sealing jaws, thus providing in them superior operation accuracy as well as speeds of up to 60 pouches/min (the speed depends upon product characteristics and filling attachment). These machines offer increased production output ratio and find application in varied industry sectors including Coffee Powder, Besan, Maida, Flour, Cocoa, Spices, Milk Powder and others.
Metal chip press machine introduction: The scrap metal briquetting machine uses hydraulic system to drive the hydraulic cylinder, the output of high pressure will be metal chips, powder and other metal raw materials cold pressed into cylindrical cake, molding at the same time to ensure that the original material remains unchanged. Convenient for storage and transportation, reduce the loss in the recycling process.
Purpose: soaking fabric with a sodium base and washing it Model: KREFELD Year of manufacture: 1979 Factory number: 12103280 Width of the shafts: 2450mm Working width of the shafts: 2200mm Number of tubs in the laundry area: 5 Power consumption: 55kW Drive with 15 DC motors and 3 asynchronous motors. Gauges of the machine: length 36m, width 4m, height 3.5m. It is powered by electricity, steam, water and air with a pressure of 7Bar. The machine has documentation. No spare parts.
125 Units Brand new in Original retail box Protect-A-Bed Premium Waterproof Mattress Protector, Queen Size Waterproof: Polyurethane film backing repels liquids like urine and sweat. Breathable Barrier Fabric: NOT hot to sleep on. Allows body vapor to breathe through pad. Dust Mite and Allergy Barrier: Miracle membrane backing provides a healthy sleep zone for your family. Easy to Wash and Use: Machine washable in warm or hot water. Tumble dry on medium heat. Good Housekeeping Seal of Approval
This brand new Variable Speed Belt Grinder Machine is an ideal machine for stock removal, profiling, handles and finish work, satin or mirror finish. It is all steel construction, and all steel frame is welded at all joints that makes this sander very solid and precise belt control. Besides, it runs smooth and the tracking is very stable so it will not make a lot of noise. The drive will convert 1 phase into 3 phase ,allows for greater control when doing detail work and reducing heat after blades are heat treated. This grinder has top of the line idlers wheels ,motor & drive.
Product Details: Available Core Cross-Section Range:30 - 150mm2 Conduit Diameter: 10mm-35mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~300mm, End 0~250mm Cutting Tolerance: ±(0.001 L) (L=Cutting Length) Speed: 400~700pcs/hour Display Way: English LCD dispaly Drive Mode: 32 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 2000W Machine weight: 200kg Size: 1120x600x950mm
This direct drive hub motor is a high-power brushless e bike motor hub, it provides 750W~1000W rated power and support 90nm max torque. Main Parameter of DGW25R Ebike Brushless Motor specification parameter Driving position Rear Wheel size 20in-28in Spoke 36holes 12G Rated power 750W Rated voltage 36V~48V Max.torque â?¥90N.m Efficiency â?¥80ï¼? Cable side Left Number of magnet 20 Reduction gear ratio 1:05 Installation dimension 175mm~190mm Inside speed sensor 1~6 Hall sensor With/Without Free wheel Cassette 9-10S/ Screw 6-7S Brake Disc-brake/V-brake Classification of waterproof IPX5 Weight 4.9Kg As one of hub motor manufacturers, we will do our best to meet all the needs of customers.
Product Description YD-22 Hydraulic Rail Tamping Machine The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Product Description YD-22 Hydraulic Rail Tamping Machine The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Gypsum is a very soft mineral composed of Calcium Sulphate Dihydrate, with the chemical formula CaSO4�·2H2O. It has colourless and transparent variety that shows a pearl like luster and has been described as having a moon like glow. It may also occur silky and fibrous, and is called satin spar. Gypsum is one of the more common minerals in sedimentary environments. It is a major rock forming mineral that produces massive beds, usually from precipitation out of highly saline waters. The crystals can also be quite large. Gypsum is a natural insulator, feeling warm to the touch when compared to a more ordinary rock or quartz crystal. Plaster of Paris is made by heating gypsum to about 300 degrees Fahrenheit, driving 75% of the water out of the mineral. Hardness is 2 and can be scratched by a fingernail. Specific Gravity is approximately 2.3+ (light)
3015 E 3000 Watt LASER CUTTING MACHINE WITH SINGLE PLATFORM Single platform laser cutting machine is suitable for cutting metal plates of various thicknesses. This E series fiber laser cutter is the best-selling product with the advantages of compact structure, high precision, long service life, beautiful appearance, and high cost-effectiveness. The bed body is annealed and aged and welded using precision welding technology, ensuring stability and durability. The gantry is made of aviation aluminum casting and has good dynamic performance. 3015 E 3000W FIBER LASER CUTTING MACHINE WITH SINGLE PLATFORM TECHNICAL PARAMETERS E series laser cutting machine WH-3015E WH-4020E WH-6020E Machine bed parameter Rated sheet size (mm) X 1500 2000 2000 Y 3000 4000 6000 Machine tool travel (mm) X 1530 2030 2030 Y 3050 4050 6050 Z 110 110 110 X/Y axis maximum positioning speed (m/min) 90 90 90 Linkage maximum positioning speed (m/min) 132 132 132 Max acceleration 1.4G 1.4G 1.4G Positioning accuracy (mm/mm) 0.03 0.03 0.03 Repeat positioning accuracy (mm) 0.01 0.01 0.01 Max load of worktable (kg) 800 1500 2200 Operation terminal Laser dedicated system and laser professional function handheld Laser source Laser power 1500w 2000w 3000w Power adjustment range 150-1500 200-2000 300-3000 Maximum cutting thickness (mm) Carbon steel 14 18 22 Stainless steel 6 8 10 Aluminum alloy 5 6 6 Features of 3015 E 3000W Laser Cutting Machine With Single Platform 01 The high-temperature heat treatment bed is stable and durable, providing excellent equipment stability and a long service life in the fiber laser cutting machine industry. 02 The 3rd-generation aviation aluminum extrusion process structure is adopted, ensuring a lightweight design with high hardness to meet the requirements of fast and precise cutting in the fiber laser cutting machine industry. 03 Equipped with a Raytools auto-focus laser head, this fibre laser cutting machine for sale automatically adjusts the focusing lens for efficient cutting of plates with different thicknesses. The automatic focus lens adjustment is ten times faster than manual adjustment, ensuring high productivity in the industry. 04 Equipped with servo motors, this fiber laser cutting machine offers precise positioning and reliable operation of the motion mechanism. Equipped with dynamic response acceleration and closed-loop control, it is an ideal choice for the fiber laser cutting industry.
KAMA KR TZM 1300 SURFACE SANDING MACHINE is a cutting-edge solution for achieving precise and top-quality sanding results on flat surface panels. Equipped with advanced features like Image Processing Technology and artificial intelligence, this machine ensures optimal sanding using 4 separate vibration sanding arms. The Control System allows for seamless operation through a 15" IPC, enabling remote management and tracking of production data. With additional features like the Robot Arm Sanding System and Scottish Cylinder System, this machine guarantees a smooth and flawless finish. #Woodworking #SandingMachine #FinishingMachines #KamaMachinery #KarabudakEngineering
Size : A4 (210mm x 297mm), Legal (Legal 216mm Ã?? 356mm), Letter (216mm 279mm) Brightness : 100% Whiteness : CIE 167 Thickness : 110 um Opacity : 95% Roughness : 140 ml/ min Sheets/Ream : 500 sheets Reams/Box : 5 Key Performance : No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Best For Use With Your : Photocopier Laser Printer Fax Machine Ink-jet Copier 2 side copying
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. NCM-5.1 Engine Honda GX270 Petrol engine Power supply 5.1kw Spindle revolution â?¥3900r/min Grinding stone inclination 30 Grinding stone feeding stroke 80mm Grinding stone feeding accuracy 1mm Weight 117KG
Limestone Crusher Plant 1) Sandvik Jaw Crusher CJ612: Drive: 160 kW x 1500 rpm Type: Single toggle Feed opening: 6100 mm x 200 mm Discharge setting: 125 - 250mm OSS Max feed size: 100mm Max capacity: 355 tph Weight: 39000 kg 2)Sandvik Hydrocone Crusher CS440: Drive: 200 kW x 1500 rpm Crushing Chamber: Extra Coarse (EC) Discharge setting: Variable Max feed size: 450 mm Max capacity: Dependent on discharge setting Weight: 19300 kg 3) Grizzly Feeder QSF1460: Drive: 37.0 kW x 1500 rpm Mechanism: Twin shaft vibrator with 4 unbalanced weights Feeder width: 1400 mm Feeder length: 6000 mm Max capacity: 750 tph Weight: 10500 kg 4)Trommel Screen QTS2590: Motor: 110.0 kW x 1500 rpm Mechanism: Single direct drive Drum Diameter: 2500 mm Length: 9000 mm Max feed rate: 1000 tph Weight: 22500 kg 5)Sand Unit QS400 x 130: Installed Power: 45.0 kW x 1500 rpm Feed size: 0/5 mm Nominal Max Feed rate: 130 tph Weight: 2350 kg 6)Picking Belt Conveyor (2 units): Gearmotor: 5.5 kW x 1500 rpm Belt speed: 15.0 m/min Belt width: 1200 mm Max capacity: 300 tph Weight: 2400 kg 7)Product Screen E10243: Drive: 2 x 37 kW Width: 3000 mm Length: 7200 mm Max feed rate: 380 tph Weight: 20600 kg 8)Dewatering screen DS1227: Drive: 2 x 4 kW Width: 1200 mm Length: 2700 mm Max feed rate: 170 tph Weight: 4000 kg 9)Recovery screen E8202: Drive: 1 x 30 kW Width: 2400 mm Length: 6000 mm Max feed rate: 460 tph Weight: 7400 kg 10)Washing screen H8202: Drive: 1 x 30 kW Width: 2400 mm Length: 6000 mm Max feed rate: 460 tph Weight: 11000 kg