CMC (Sodium Carboxymethyl Cellulose), when D.S is 1:00, its molecular formula is [C6H7O2(OH)2OCH2COONa]n, CMC is odorless, tasteless, non-toxic white or micro-yellow powder or granule which is made from natural cotton fibers or wood pulp, it can briefly be described as an anionic water-soluble polymer. Act as thickener, stablise emulsions, rheology modifier, water retention aid, filtration reducer, binder, dispersant, protective colloid, floating aid, etc, it can be widely used in Ceramic, Building, Oil Drilling, Detergent, Food, paper, Textile, welding and other industries. Application: Paint Grade CMC :With good dispersion, coating evenly distributed; not hierarchical and stable performance; has good tackifying effect, you can adjust the paint Viscosity; improve rheological property of the paint ;most of the surface-active agents and preservatives can be used with water-soluble paint match. CMC can be used in ceramic body, glazing pulp, and decoration. Used in ceramic body, it is a good strengthening agent, which can strengthen the mouldability of mud and sand materials, help the shaping of the base and increase the folding strength of the green body. Used in glazing pulp and decoration, it is a binder that plays a role of suspending, uncoagulating, and keeping water. In paper making industry, CMC is used to make the paint for coated paper, as additive in wet-end and sizing agent for surface. We have different paper making grades of CMC products to satisfy different customersâ?? requirements CMC is used in mining industry as pellet binder and floating selection inhibitor. CMC is a component of the binder for mineral dust shaping, and the binder is an indispensable ingredient in pellet forming. it can improve the character of wet pellet, dry pellet and calcinated pellet. Due to its good binding property and pellet forming property, the green pellet with CMC has excellent antiknock performance, high compressive strength and dropping resistance. It can also increase the grade of pellet. PAC (Poly anionic Cellulose) is a water-soluble polymer produced from cellulose chemically reacted with carboxy-methyl(anionic) groups which is widely used in water-based drilling fluid for a variety of applications, such as filtration control, viscosity and shale inhibition.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. ã??Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. ã??Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Thermal Break Double Glazing Aluminum French Door 1, Material -aluminum alloy profile, profile thickness from 1.0-2.0mm -Profile sery: Casement/awning/tilt & turn window can be adopted 45/50/55-56/60/65/70mm sery, sliding window can be adopted 70/85/88mm sery.a -Surface treatment: Powder coating in different RAS color. Anodized color/PVDF/wood skin transfer printing/electrophoresis. 2, aluminum window can be designed several types: -sliding windows and doors -casement windows and doors -awning windows(top & bottom opening) -folder windows and doors -tilt & turn windows and doors 3, glasses: -it can be adopted single glass from 4-15mm clear flolat glasses -it can be adopted double insulating glass, such as 5+6+5, 5+9+5, etc. -the glass can be frosted, tempered/tinted/low-e glass, the insulating glass can be filled with argon gas. 4, hardware - all kinds of high quality Chinese hardware -Germany brands hardware 5, Certificate: -SGS/BV/CE/AS 6, production lead time & capacity: - 21 working days/12000 square meters/monthly. 7, the accurate prices will be up to the below details: -window's types -window's designs -order q'ty -hardware/glass and so on. -other request details. >>> About us: - Located in Jimo, Qingdao City, Shandong Province, China. - With 6200 Square Meter factory area, about 120 workshop workers and 30 office workers, with production of 10000 Square Meter per Month. - Manufacture and supply good quality pvc & aluminum, wooden windows /doors, aluminum composite windows and doors. - Main markets: Africa, North America, South America, Mid East, Western Europe, Southeast Asia, Eastern Asia . Why Choose Us ? 1.We have our own factory and own brand "Windoor", best service & best quality is our company life . 2.We have a very powerful & professional team for producing & selling nearly 10 years . 3.We have doing the exporting since we established the company , our customers are around the world, we have rich experience for servicing the customers from the world . 4. We provide the free sample and the shortest lead time . If you have any request details as the above listed, please send to us, then we can design and make the accurate prices for you. Hope to cooperate with you.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. ã??Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety.
Glucosyl Stevia is made by the selective introduction of glucosyl into the stevia molecule with the Biological enzyme technology, which increases the number of glucosides, removes its bitter taste, thus greatly improves stevia's quality and taste. Characteristics: White to light yellow powder, tablets or granules. It overcomes common stevia's weaknesses of inconstancy in purity, low solubility and unpleasant bitter taste, making it taste more like cane sugar. Therefore, its substitution rate of cane sugar can be raised from previous 30% to 70%, and the cost can be cut. Its sweetness is 100-200 times that of cane sugar with a fresh sweetness. Usually, it uses lactose and maltodextrin as the dispersant to reduce the sweetness to 0.5-1 times that of cane sugar. ã??Use: This product is quite stable under usual food processing conditions. Its water dispersion is increased with enzyme technology, as a result, its solubility is higher, making it quite suitable for various beverages and wines. It's mainly used in low calorie food, sodas, juices, cold drinks, desserts, pickles and aquatic products. Technology: This product's main producing and processing technical process: Extract sweetness in stevia leaves, after filter pressing, purification and concentration, add in refined maltodextrin and mix and blend it. Firstly, inject in "CGT" enzyme preparation, carry out homogeneous reaction at 65-68 degree Celsius for 72 hours. After stevia's transfer rate has reached 65%, inject in WBA or AMG300 enzyme preparation, adjust the light transmittance of the liquid glucose to above 95% and begin to heat it up to 90 degree Celsius and stop heating, then filter, condense and dry it with diatomite, finishing a processing cycle. This product's high technology and advancement is mainly manifested in following aspects: This technology applies CGT enzyme, combines stevia and some Sugar compounds, after catalytic reaction, by adding in glucosyl, effectively removes stevia of its bitter taste, thus improves its taste and quality. The Product's production and packaging process is environmentally friendly. In the production process, the production temperature, time, moisture content, humidity and relevant Rational and health indicators are automatically or semi-automatically controlled and tested with relevant electronic automatic numerical control devices. This product's health indicators confirm to state specified standards, so it has edible safety
Specifications: NameMilk chewy candy Item Number XL084-2000 Delivery Time10 working days after received your payment OEM service 1.Private label and Custom design are avaiable 2.Custom flavor, color and shape are available. Packaging Detail 25g*100pcs*20bag We accept the customized packing request. Payment Terms 1)T/T 2)Western Union 3)Paypal 4)Money gram How to preserves 1. Pls store in cool & dry place 2. Pls keep away from direct sunshine MOQ1000 Cartons Main marketSoutheast Asia ,South Africa ,Middle East ,South America .Europe Description 1. Selecting imported original milk powder to keep candies' good taste . 2. Bag packed and handling boxes will make all things convenience .Good to be Gift to your friends . 3. Strong milk taste will take you into a pasture . . 4. Green candy & Eco-friendly Products (All the materials and packing were selected by green ,high level standard ,ensure all are up to international requirement .) 5. Healthy Function (Our candy base on Sugar free& Low energy production manufacturing technology which bring your healthy snack foods) 6. Abundant Nutrition ( Fresh and real raw material to make our candy abundant nutrition ). 7. Good taste with big joy will let you be happy all the times . 8. High speed production (we could offer you a fast and qualify shipment by Advantage machine & faster automatic production line ) 9. GMP Quality system Production room (Every piece of candy is produced in GMP system required clean room . 10. Center Air Conditioning System (Utilizing Center Air Conditioning to offer a thermostatic,automatic constant humidity clean environment to ensure the high quality&safety of candy) Competitive Advantage: 1. Support OEM and ODM service (Candy flavor/colour/shape/packing/design/logo ,can be made according your request) 2. Free Design service offered 3. Free sample charge 4. Shipping service Direct prompt shipment is supplied, save your agent fees and reduce your cost DDP/DDU/FOB/EXW/FAS NO matter where are you, we can arrange the most suitable shipment option for you. 5. Professional suggestion and fast reply 6. New items recommend first 7. Small order accept-mix container 8. Big order come with big discount,trial orders are welcome with competitive price 9. Quality control and Production track service 10. Feedback tracking
Peppermint Oil Fresh Tilapia Fish Apple Green Cardamom Fresh Octopus Indian Sweets & Namkeens Frozen Cuttlefish Fresh Tuna Fish Copra Charcoal Frozen Tilapia Fish Mushrooms Rice Fresh Mushroom Fertilizers Green Tea Animal By Products Curry Leaves Turmeric Fish Maw Milk Powder Fresh Shrimps Chilli Powder Coconut Shell Dried Seafood Spices Frozen Lobsters Palm Oil Herbal Extracts Cumin Powder Fresh Cuttlefish Tiger Nuts Coconut Cardamom, Cinnamon Fresh Ginger Frozen Mackerel Fish Frozen Shrimps Ginger, Garlic, Onion, Potato Pepper Fresh Squid Bamboo Frozen Seafood Herbs Coffee Frozen Shark Fins Frozen Anchovy Fish Fresh Onion Frozen Octopus Organic Fertilizers Fresh Fruits Frozen Prawns White Tea Basmati Rice .
1. Product Introduction The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in a surrounding heating method, effectively increasing the utilization rate of thermal energy. At the same time, it occupies the front end of conventional digestion equipment with its advantages of higher temperature control accuracy, small differences between holes, fast digestion, energy saving and environmental protection. It can adapt to various types of samples, including soil, water, plants, food, etc. Graphite digesters are widely used in environmental monitoring, food safety, geological exploration and other fields. It can process samples quickly and efficiently and provide accurate and reliable analysis results. 2. Graphite digester parameters Model: BZH-R-XJ Temperature control range: room temperature-220â?? Temperature control accuracy: �±0.1â?? Heating material: graphite + Teflon anti-corrosion coating Number of sample holes: 16, 24, 36, 48, 54, 63, 100 (can be customized according to customer requirements) Control and display mode: PID temperature control digital display Power supply: 220v/50Hz Supporting products: PTFE digestion tube, PFA digestion tube IV. Advantages of our graphite digester Advantage 1: High temperature resistance, acid and alkali resistance and organic solvent corrosion resistance, good stability; Advantage 2: Fast sample digestion speed, batch processing of samples; Advantage 3: Fully enclosed design, while preventing heat loss to a large extent, can also effectively avoid acid mist invasion and damage to equipment components; Advantage 4: Clean and corrosion-resistant: Using a special spraying process, the coating is uniform, firm, and will not fall off after long-term use; Advantage 5: Using advanced integrated surround heating method, all parts of the sample are heated evenly, and the digestion is fast and complete; Advantage 6: Easy to operate, environmentally friendly and energy-saving, saving economic costs; Advantage 7: PID temperature control system, excellent performance, high temperature control accuracy, up to �±1â??. Advantage 8: The heating rate can be adjusted to achieve program heating and control the heating holding time, and the heating rate is stable; We advocate stable, healthy and fast experiments! Application areas Environmental monitoring: sewage, drinking water, sludge, mineral mud, sewage, soil, etc. Food and agricultural product inspection: milk powder, fish, vegetables, tobacco, plants, fertilizers, non-staple food, etc. Consumer product quality control: cosmetics, industrial products, etc. Scientific research: experimental analysis, project development, etc. Disease prevention and control: biological samples, human hair, etc.
H10294-2 One way clutch accessories ZJ-50 friction drum ZB501.02.10 Ordinary medium plate 10*2000*12000mm Q235B MAN33.430TGA Lubrication* Oil Cooler 51056010121 Hydraulic tank accessories F-1000 Lock nut M24 AH35001-05.15A WASHER, LOCK-HEAVY 51012-C Winch oil pump drive shaftParts ZJ-30 cycloidal gear pump 3KNB-12.5B Drill pipe power pliers accessories ZQ203-125 high pressure hose M30*1.5*20000mm*â?´ Drilling rig top drive accessories Beishi DQ70BSC hydraulic motor 5126000790 Sleeve ring JLH-C 400YT/YZ-1 Faucet accessories ZJ-15 flush tube-LB-160 Valve:Reducing/Relieving F/Tds-9S 99353-1AN 79628 SCREW,TERMINAL*SCD* SPRING, DISK, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-14 GT350E chassis* steel plateCenter screw and cap front BLOCK, VALVE, OILWAY(3), DRAWING NO: HTY16.05, FOR HYDRAULIC DISC BRAKE HPU, MODEL: YZ311-SC, P/N: 1200005386 Hydraulic tank accessories F-1000 Pump Air Pack Capsules 200FYY039 seat valve 50008-14-C5D SCREW, CAP-HEX HD DRILLED Powder card release agent SR-301 DRILLCOLLAR SAFETY CLAMP SIZE: 5-1/2" - 7" Mercedes-Benz 2530 Brake*Handbrake valve GT350E engine *rowvalve guide KEY (32 X 128) BG-082001-0203 Base for brake gear 1.02.15.101 35�?70 BOP accessoriesFZ35-70 piston JK00213-19 AIR BLADDER W16-20-900 Gland: M20 Armored Potd M614002989-03 596-07-0 Drilling rig top drive device accessories VARCO top drive hydraulic cock 630*631 15000Psi Sleeve : Stem For Power Swivel Unit 91829-1 High pressure elbow and fittingsHEAD REPAIR KIT FMC 3" 20000PSI P527340 O-RING 51300-226-B Diesel generator set accessories ONAN-HDKAL-6.0 fan belt 185-7435 Ordinary nozzle JZS 4-17mm BEARING, SELF LUB, 1.00 ID X .50 LG 118844-16-8 Module studded discharge NB1600M.01.06.00H For mud pump HHF-1600HL Electromagnetic eddy current brake accessoriesZJ70D disc brake water gas instrument device JC70D01TG-51.00 BEARING, ROLLER, FOR HYDRAULIC POWER TONG, MODEL: 16-25, MAKE: WEATHERFORD, P/N: 101866-001 Cartridge: Needle-Valve 128401 PULLEY, ENCODER 120119-2 Corrosion resistant main shaft sleeve 1.01.39.001 Finger weight dial JZ60.2.2-2 NUT, HEX-STANDARD (UNF-2B) 55214-C Fuel Filter, p/n P550959. DONALDSON. Material: paper, Dimensions: D60 X H160 mm Spindle SL225-16 for faucet SL225 Drill pipe power tong accessories ZQ203 screw sleeve 100 03-11M O-ring H18.10 H15-2001-04-02 Screw: Cap, Flat Head 96371+30 91913-24 HOSE 1.50ID 2.08OD Remote Control System AccessoriesFKQ640-7 air filter regulator QFH-221 52012-24-G NIPPLE, PIPE Finger weight dial JZ100-3 E12367 Electromagnetic eddy current brake accessoriesZJ-45J water air hoist sealing packing ACCUMULATOR FOR HYDRAULIC DISC BRAKE HPU 1300090572 MAN33.373DFC chassis *hand brake valve Inclinometer copper connector SQR16 Fluid loss reducer for drilling fluid REDU1 30116803 BEARING,ROLLER,TAPERED
Liquid end accessories GJC70-25 PG05A+TH06 A copper ring for plunger 5" Power selection box accessories SPM600 discharge spring M01-1012-010 Brake device accessories ZJ-30 Hydraulic oil pump IPT4078725 Fluid loss reducer for drilling fluidNAT-20 Hydraulic tank accessories F-1300 Cylinder head sealing ring AH36001-05.08 Diode bridge M50100THC1600-8701) AIR COMPRESSOR; E23524143 (23524143); DETROIT DIESEL; 1.87 m�³, 8 atmospheres 35�?35 BOP accessoriesFZ35-35 Plug R3/4" RJ11148.37 190 series diesel engineBody and cylinder head parts * Upper main bearing bush 12VB.01.23A Z07130000002AA Telescopic cylinder Drill pipe tong accessories ZQ203-125 installation box 19.751.00 Exclude air pack accessories F-1300 air bag exhaust valve PJC1-L8 PIN, COTTER 51435-20 50016-48-C5D SCREW, CAP-HEX HD DRILLED, TDS Power selection box accessory ACF-1000 High pressure T-type tee 105mpa 1502 4600170 BEARING, LESS INNER RACE H06-1018-010 VOLVOFM12 chassis* Fender bandages Special accessories for cementing tools KG clamp 244.5mm industrial salt industrial grade Gepin 99% Low pressure manual butterfly valve D7A1X5 1.6MPa Z DN300 STUD&NUT, STUD ALL THREAD, 7/8",X 112mm,ASTM A193-B7M & ASTM A194-2HM,,ZINC PLATED 0502-14112-121 Special accessories for cementing tools DYX-A impact seat 177.8mm TC buckle Solid lubricant graphite powder LU-66 for drilling fluid Weichai diesel engine parts coldcooling system* tank cover 4100 Drilling Monitor ZJ70D Power board 0509-1200-03 PC01 O-RING, 2-242 BUNA-N 70 DURO, Part No: 6170-242 YZ101.55.40.04 Axle Pin WASHER, LOCK REGULAR 50906-C 56519-8-8-S ELBOW, O-RING BOSS/37DEG Base accessories F-1600Air bag assembly AH33002-00A KB-75 Weichai diesel engine accessoriesMotive*Engine Overhaul Kit 4100 35�?70 BOP AccessoriesFZ35-70 pressure plate screw JK00213-37 56558-8-10-S ADAPTER, BLKHD-EXT PIPE TDS O-RING, COVER/BEARING RETAINER 51300-277-B H13-1035-01A Seal:Wiper,Gear Ph100 30124656 Oil seal S05-1008-020 Canrig PULLEY, TIMING 120119-1 Electromagnetic eddy current brake accessoriesZJ-50 Air-cooled electromagnetic brake control box SBWS-50 35*70 BOP accessoriesFZ35*70W(XD) shear ram assembly
CAS.144-55-8 Sodium bicarbonate can be used in the production of acid base fire extinguisher and foam fire extinguisher, in the rubber industry sodium bicarbonate can be used in rubber, sponge production. Sodium bicarbonate can be used as a flux for casting steel ingot in metallurgical industry. In the machinery industry, sodium bicarbonate can be used as a casting steel (foundry) sand molding aid. In the printing and dyeing industry, sodium bicarbonate can be used as dyeing printing fixing agent, acid-base buffering agent, fabric dyeing and finishing rear treatment agent; Baking soda is added to dyeing to prevent the yarn from producing colored flowers. It can also be used as a detergent for wool. In food processing, sodium bicarbonate is one of the most widely used osteoporosis agent, used in the production of biscuits, bread, etc., but after the action will remain sodium carbonate, too much use will make food alkalinity is too large and lead to bad flavor, yellow brown color. Is the producer of carbon dioxide in soda drinks; It can be combined with alum to form alkaline baking powder, and can also be combined with soda ash to form civil stone base. It can also be used as a butter preservative. In vegetable processing can be used as fruit and vegetable color agent. Adding about 0.1%~0.2% sodium bicarbonate when washing fruits and vegetables can make the green stability. When sodium bicarbonate is used as a treatment agent for fruits and vegetables, it can increase the pH value of fruits and vegetables, improve the water holding capacity of proteins, promote the softening of food tissue cells, and make astringent ingredients dissolve out. In addition to sheep milk to mutton, the use of 0.001%~0.002%. Sodium bicarbonate can be used for agricultural seed soaking, but also can make up for the shortage of lysine content in feed, sodium bicarbonate dissolved in a small amount of water or mixed into concentrate for cattle feeding (add appropriate amount), can promote the growth of cattle, but also can significantly improve the milk yield of cows. Sodium bicarbonate can be used as a pharmaceutical raw material, used in the treatment of excessive stomach acid, metabolic acidosis, also can alkalize urine to prevent uric acid kidney stones. It can also reduce the renal toxicity of sulfonamide drugs, prevent hemoglobin deposition in renal tubules during acute hemolysis, and treat the symptoms caused by excessive stomach acid. Intravenous drip has non-specific therapeutic effect on barbiturates, salicylic acids and methanol poisoning. However, it is forbidden to be used for gastric lavage in case of swallowing strong acid poisoning, with large amounts of injection, renal insufficiency or long-term application, arrhythmia, muscle spasm, pain, abnormal fatigue and weakness, slow breathing, bad oral odor, frequent urination, urgency of urination, persistent headache, loss of appetite, nausea, vomiting, etc.
Zhuoji gem cutting surface Angle grinding and polishing CNC machine No. 810501338 Model XX-5M The automaton is made up of 5 stepping motors. The functions of each motor are as follows: Y1 motor function: responsible for the plate position (such as octagonal hand or manipulator) Y2 motor function: responsible for the Angle or strength of downward sand beating Y3 motor function: responsible for moving the head to the left or right, that is, when playing sand adjustment, moves the nose to the disc side to work Y4 motor function: responsible for lifting and lowering (such as the lifting platform of octagonal hand) Function of Y5 motor: responsible for paddling sand and paddling distance Input board position -- Y1 parameter (start input with y1 value on board 01) Aligning stone -- Y1 parameter (overall aligning) Increase and decrease height -- Y4 parameter (height) Adjust the yaw Angle -- Y2 parameter (Y2 height from the disc) Adjust the height again --y4 parameter (height) Overall increase and decrease of strength -- Y2 parameter (overall increase and decrease of strength of Y2) Polishing intensity -- Y2 parameter (note: Polishing intensity starts from 80) Increase and decrease the strength of each plate separately -- parameter Y2 (start looking for the strength of the 1st plate) Reverse (cross) Y3 // Y5 mode: Positive and negative turn (row), dot sand (dot) Stroke long, stroke short distance -- Y5 parameter (position of Y5 dial) Fast, Slow speed -- Speed setting (Y5 speed) Speed: speed setting (V2 low-speed speed), Y2 parameter (Y2 low-speed height) Polishing parameter operation function Y3 parameter (Y3 position: adjust 7000 or so)-- test Y4 parameter (Y4 height)-- test Y2 parameter (y2 height from disk)-- adjust Y4 parameter (y4 overall rise and fall)-- adjust long and short distance Y5 parameter (Y5 sliding distance) -- Increasing force Y2 parameter (overall increase or decrease of force y2) The number of layers can be 1-10 layers, each layer has 16 boards Suitable for: corundum, spinel, ruby, turquoise, olivine, topaz/topaz, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass Can process shape: round, oval, square, rectangle, triangle, pear, heart, water drop, horse eye shape, plum shape, star, leaf, axe shape, three-dimensional beads, three-dimensional water drop, three-dimensional triangle square ring face, egg ring face, pear ring face, bracelet, intermediate finger, flat bead, round bead and so on Accessories: Diamond forming disc/polishing powder Technical parameters: Input voltage :AC220V Motor power: 250W Main speed: 2800r/min Dimensions: length 560mmÃ?? width 800mmÃ?? height 1390mm Maximum loading mill size :8 inches (200mm) Maximum loading and throwing disc size :8 inches (200mm) Can switch English system
Warranty: More than 5 years After-sale Service: Online technical support Project Solution Capability: graphic design, 3D model design, total solution for projects Application: Hotel, Office Building, School, Supermarke... Design Style: Modern Place of Origin: Shandong, China Brand Name: Dream Brand Model Number: 595*595/603*603 Function: Fireproof, Moisture-Proof, Sound-Absorbing, Waterproof Feature: Artistic Ceilings, Integrated Ceilings Ceiling Tile Shape: Square Ceiling Tile Type: Plasterboard Ceilings Product Name: PVC Gypsum Ceiling Tiles Thickness: 7-12mm Size: 595*595mm/603*603mm/595*1195mm/603*1213 Main Material: Gypsum Powder + PVC Paper Front Side: PVC Film Back Side: Aluminum Foil Packing: Carton Certificate: CE, ISO9001 Supply Ability Supply Ability 80000000 Square Meter/Square Meters per Year Packaging & delivery Packaging Details 6/8/10pcs/carton Port Qingdao port Picture Example: package-imgpackage-img Lead time: Quantity(square meters) 1 - 42000 >42000 Lead time (days) 15 To be negotiated Product Description Width(mm) Length(mm) Thickness(mm) Color Application 595 595 / 1195 7.0 / 7.5 / 8.0/ 9.0 /12.0 White&Colorful Ceilling Wall decoration 600 600/ 1200 603 603 / 1213 Metric / Imperial Sizes Available Main Characteristic 1.Environment protection product: Adopting natural gypsum material free of any harmful material. 2.Light weight, convenient to transport 3.Sunken proof & Non-dust, Easy clean 4.Good light reflection 5.Corrosion-resistant Company Profile Dream Brand New Materials Co., Ltd which was reorganized by the worldâ??s largest gypsum board manufacturer BNBM Group and the Chinaâ??s second largest gypsum board manufacturer WanJia Group, to be the Branches of CNBM-the 243rd in Fortune Global 500. Our company has 10 modern manufacturing plants in Shandong and Anhui province. The annual production capacity of gypsum board is 390 million square meters. Take gypsum board as our core business, supplying gypsum board, PVC gypsum ceiling tiles, steel profile, ceiling t-grid and other eco-friendly and energy-saving new building materials to all world builders and family users. Our company has hundreds of invention patents and obtained ISO,CE,SGS certification, our super quality products not only met the needs of our home customers but also got very good reputation and trust from our overseas customers like Africa , America , Europe, Middle East and South East Asia etc. Packing & Delivery Product application Certifications
Dual maintenance LED Video Wall DIP outdoor,PH10/PH16/PH20 Quick front access design, â?¥8000nit high brightness, great performance against ultraviolet, after years development, the DIP LED display is still popular in the market. Why front service LED Video Wall?â?? Malfunction Modules replacement is easy & fast to realise. It takes less than one minute to take off the module, saving time and cost considerablyThe traditional rear service design, it takes much time, quite troublesome.â?? Saves installation room, no need to leave rear service tunnel. The LED video wall could be installed against the wall directly, with a little free room for heat dissipation.Key Featuresâ?? Easy to replace the modules, receiving cards, and power supplies, all from front side.Whatâ??s more, the learning cost is quite low, for a guy without any previous experience in maintenance, he/she could find the way in a few minutes.â?? Ultra-high brightnessï¼?> 8500nitsCrystal clear image against sunshineâ?? Various pixel pitches available. PH10, PH16, PH20.Among them, PH16 and P1h20 have virtual pixel one available (2R1G1B)â?? Warranty time: 3 yearsCabinet size available: 960mm*960mm & 1280mm*960mm & 1280*1280mm. Powder coated iron and aluminum optional; by iron, about 55kg per square meter; by iron, about 35kg per square meter.Parameter ModelP10P16P20Pixel Pitch10 mm16 mm20 mmLED TypeDIP346DIP346DIP346Configuration1R1G1B2R1G1B2R1G1BModule Size320*320 mm320*320 mm320*320 mmPixel Density10000 pixel/ã?¡3906 pixel/ã?¡2500 pixel/ã?¡Refresh Rateâ?¥ 1920Hzâ?¥ 1920Hzâ?¥ 1920HzGray Scale16 Bit16 Bit16 BitBrightnessâ?¥ 7000 nitâ?¥ 9000 nitâ?¥7000 nitScan Way1/41/2Static scanFrame Rate50HZ~60HZ50HZ~60HZ50HZ~60HZViewing AngleH:110°, V:55°H:110°, V:55°H:110°, V:55°Cabinet Resolution96*96 Dots60*60Dots48*48DotsMaterialIronIronIronCabinet Size960*960mm130mm960*960mm130mm960*960mm130mmCabinet Weight48Kg48Kg48KgIP RatingFront IP65, Rear IP54Front IP65, Rear IP54Front IP65, Rear IP54Control SystemNova/Linsn/ColorlightNova/Linsn/ColorlightNova/Linsn/ColorlightOperation SystemWindows/me/200NT/XPWindows/me/200NT/XPWindows/me/200NT/XPWorking-Temperature-20â??~60â??-20â??~60â??-20â??~60â??Working Humidity10%~90% RH10%~90% RH10%~90% RHInput VoltageAC 110~220 V (±5%ï¼?AC 110~220 V (±5%ï¼?AC 110~220 V (±5%ï¼?Blind spot rateâ?¤0.01%â?¤0.01%â?¤0.01%MTBF35000 Hour35000 Hour35000 HourLifespan100000 Hour100000 Hour100000 HourCertificationCCC,CE,RosH,ETLCCC,CE,RosH,ETLCCC,CE,RosH,ETLBy a T shape tool, within 60 seconds, one module could be removed easily. For a guy without any previous experience in maintenance, he/she could learn how in a few minutes. And whatâ??s more, the end user himself could solve the maintenance issue in future, without requiring onsite service by the installation company.  Application: MATRIX DISPLAY front service led display is an Ideal solution for outdoor advertising, massively used in lots of places. Other products you might be interested in:
