Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Hongxin Automation Equipment Co., Ltd. Vibratory Bowl is an auxiliary feeding equipment for automatic assembly or processing machinery. It can arrange various products in an orderly manner, assemble various parts of the product together with automatic assembly equipment, and become a complete product, or complete the processing of workpieces with automatic processing machinery. There is a pulse electromagnet under the vibratory Bowl hopper, which can make the hopper vibrate vertically. The inclined spring plate drives the hopper to rotate around its vertical axis for torsional vibration. The parts inside the hopper rise along the spiral track due to this vibration. During the ascent process, after a series of track screening or attitude adjustment, the parts can automatically enter the assembly or processing position in a unified state according to the requirements of assembly or processing. The purpose of its work is to automatically and orderly arrange disordered workpieces in a directional and orderly manner through vibration, and accurately transport them to the next process. Application: Vibratory Bowl is widely used in various industries such as electronics, hardware, plastics, watch industry, batteries, food, connectors, medical equipment, pharmaceuticals, food, toys, stationery, and daily necessities manufacturing. They are essential equipment for solving industrial automation equipment supply problems. The vibrating disc can not only meet the directional sorting requirements of products, but also be used for sorting, testing, counting, packaging, etc. It is a modern high-tech product.
Hitachi Undercarriage Parts Available Model: CX300, CX350, CX350DR, CX500, CX500-2, CX550, CX550-2, CX650, CX700, CX700 Link Type, CX900, CX900HD, CX1000, CX1100, CK550, HE6010B, KH70, KH100, KH100-1, KH100-2, KH100D, KH125, KH125-2, KH125-3, KH125-3 Link Type, KH125D, KH150, KH150-2, KH150-3, KH180, KH180-2, KH180-3, KH180-3 Link Type, KH230, KH230 Link Type, KH230-3, KH250, KH250-3, KH250HD, KH300, KH300-2, KH300-3, KH500, KH500-2, KH500-3, KH700, KH700-1, KH700-2, KH850-3, KH1000, MX6515B, PD7, PD80, PD90, PD100, PD135, TH55, TH55ED, U106A, HE6010B , CX1800, CX2000 1. Warranty time: 1 years/2500 working days 2. Certification: SGS, ISO9001 3. Colors: Black / Customer Requirement 4. MOQ: 1 PC 5. Payment Term: TT;LC; Negotiate 6. Delivery Time: stock or 15-25days after payment 7. Package: Strong Pallet / Plywood Case 8. Undercarriage Parts Type: track shoes, bottom rollers, top rollers, sprockets, idlers, track chains, tension, springs, and more.
Product Description Specifications Quarter Package: Improved Nylon with Revel CX Technology Excellent support and stability, ideal for the beginner or casual player CX Tech provides enhanced comfort and performance through its compression molding process Heat moldable for a custom fit and reduced break-in time Flexible tendon guard, forward boot rake (or lean) and toe spring all help promote the ideal roller hockey stride Liner: Comfortable brushed Nylex that also wicks away moisture Tongue Construction: Two-piece, Vented Pro Felt Thick design protects the top of the foot from impacts and lace-bite Ventilated center to promote consistent airflow Outsole: Embossed PVC Plastic Delivers a perfect balance of lateral support and forgiveness Frame: Two-Piece Alkali Rize Aluminum Chassis Larger rear wheels with smaller front wheels increase agility without compromising top-end speed Sizes 1.0-3.0 /(2) 59mm in the front and (2) 68mm in the rear Sizes 4.0-5.0 /(2) 68mm in the front and (2) 72mm in the rear Sizes 6.0-13.0 /(2) 76mm in the front and (2) 80mm in the rear Square Flush 6mm Axles Wheels: Alkali Cerberus 74A Indoor Wheels Single-pour construction Bearings: ABEC 7 608 Bearings Skate Width: D Weight: TBD
Grease Bucket Pumps Grease Dispensing Unit G9-power -Bucket Grease Pump 3kg, 5kg,10 kg,15kg,20kg We at Ganpati Industries, a leading Grease Bucket Pump supplier in India offers Grease Bucket Pump designed for quick & effortless greasing in applications requiring large volume of Lubrication Works manual without air pressure Portable to any place Quick and easy openable cover Spring loaded disc is placed in side the drum to make positive pressure or easy pumping of grease. Removable Handle Lever operated pump mounted on cover of drum. 1/4"x 2.2 meter wire braided, oil resistance high pressure hose. Sales and support team Capacity 3L, 5L, 10L, 15 L, 20 L with/without wheels INSTRUCTIONS:- Always use oil mixed semi solid dust free grease. Do not replace spilled grease from the floor into the container. The pressure hose and the unit should always be kept clean. Release pressure when not in use.
Circular 4 Pin Connector Circular 4 Pin Connector – the ultimate solution for all your electrical connectivity needs. With its exceptional build quality and versatile applications, this connector is set to revolutionize the way you connect your electronic devices. The Circular 4 Pin Connector boasts a robust construction that ensures durability and longevity. Crafted from high-quality materials, this connector is built to withstand the rigors of daily use. Whether you need to connect multiple audiovisual devices, lighting systems, or power sources, this connector will deliver optimal performance and reliability. Features Quick Connect Agile Lock Stable spring snap self-locking device, Press the "Push" button to easily unlock International Certification Passed CQC, TUV, and UL, etc certifications. Multiple Certifications escort for you. Waterproof Fireproof UV Protection Pass UVO Fire Retardant Test, IP67 High Standard In Waterproof, Fireproof& UV Protection Use Silica Gel Irrigation Stable Inner Cores The inner cores use silica gel irrigation, for more accurate and stable
Product Description Our Platinum TwinDrag two-speed reels are simply the finest built and most rigorously tested offshore reels available to serious big-game fisherman. Designed to be light weight yet extremely durable, they offer state-of-the-art technology not found in other reels. Complementing the reel's ultra-smooth and highly efficient TwinDrag system is a unique, graduated alphanumeric visual reference scale that works in conjunction with the preset lever to enable precise drag range settings. That in conjunction with the reel's two-speed Quick-Shift, which allows for an easy transition between high and low gears, gives anglers a decided advantage when fighting powerful fish like big wahoo, tuna and marlin. Unhindered free spool at every drag setting Heat treated pinion gears Patented TwinDrag system Stainless Steel gears Stainless Steel Springs and Clips Removable Spool stud 2 Stainless Steel anti-reverse dogs 7 Abec rated Stainless Steel bearings sealed with teflon impregnation Accudrags Harness lugs ATD Reel Bag One year warranty
The listed price USD 225 based on MOQ: 20 pcs. Never try Scams, we are always vigilant on online scams. If you are really serious buyers (neither suppliers nor scammers), welcome to reach out to me directly by Google with keyword: (soartec.mybranchbob) for more product details. To attention of serious buyers of air powered pneumatic tools sanders, you might look for the products within your interest first, then just make business friends with the suppliers who have the products you want; but I suggest you may try making business friends with me Roger first, then just see if I have the products you want. *Product Features: *Blade featuring a spring-mounted mechanism to prevent deadlock or power-related issues. *Incorporation of a 2-step throttle system aimed at enhancing operational convenience. *Product Spec.: *Model: WS-2106 *Hammer Mechanism: Twin Hammer *Std. Bolt Cap.: 30 (mm) *Max. Torque @ 5s: 1630 (ft-lb) *Length: 434 (mm) *Trigger: 2 step throttle type *Regulator: 4 position power *Anvil length: 6' Price: 225.00 USD based on MOQ: 20 pcs.
Tablecloth Wrapping Fabric, Non Woven Fabrics Tablecloth, Flower Wrapping Fabric Supplier REASONS TO CHOOSE TABLECLOTH & FLOWER WRAPPING FABRIC: Product: Flower Wrapping Fabric Material: 100% Polypropylene Technics : Spun bonded Weight 60gsm to 80gsm or customized PRODUCT SPECIFICATIONS: Product: Flower Wrapping Fabric Material: 100% Polypropylene Technics : Spun bonded Weight 60gsm to 80gsm or customized Size: 80cm x 20m, 80cm x 50m, or customized Colors: white/black/green/red/yellow/pink, or customized MOQ: 2000kg/color Packaging: 2cm, 4cm, 2" or 3" paper tube inside and poly bag outside Characteristics: Eco-friendly, recyclable, breathable, good strength and elongation Qingdao Yihe is one of the leading 100% Breathable Mattress Cover Wholesaler. Our PP Spunbonded Nonwoven Fabrics has high quality and competitive price. We also produce Spring Pocket Non Woven Fabric, if you want to know more about non-woven fabrics
Nickel Silver Plate Alloy Code: C7701, C7521 C7701 CU:54-56 Ni:17-19 Zn: Rem C7521 CU:63-66 Ni:17-19 Zn: Rem Main Properties : Beautiful Color and luster, very good cool processing performance and ductility Excellent fatigue resistance Good anti-corrosion property Good forming and welding performance Outstanding electric performance ,mechanical properties,radiation shielding performance Main Application : Shielding Device ,connection-peg Crystal oscillator and casing Optic and wind instrument ,etching board Medical treatment ,spring,resistance unit Remarks: (1) Shipping term: FOB Korea or CIF. (2) Payment term: T/T or L/C 100% at sight. (3) M.O.Q. will be adjusted based on the specification. (4) Certification: ISO 9001 (5) Country of origin: South Korea. (6) Packaging: Bobbin, coil, Match the client's specification. (7) Q'TY : +/- 10% (8) Shipping Mark : As your request (9) The exact spec comply with mutual discussion
Product Name: Acai Powder Product Code: WH1001 Description: The acai berry is the fruit of the acai palm (Euterpe oleracea), native to the amazon, and has been consumed for centuries in popular recipes in the north of Brazil. This super fruit of purple color and remarkable flavor is rich in anthocyanins(a natural constituent with antioxidant activity), amino acids, essential fatty acids, fibers, proteins, and minerals (mainly calcium and potassium). This dehydrated ingredient is obtained from selected acai juice, and dried by atomization(Spray Dryer). Common Uses and Orientative Dosage: Food supplement 500.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Bordeaux Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Moisture Max. 5.00 g/100g Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Particle Size 0.42mm(40 mesh) Max. 5.00 g/100g Total Polyphenols Min. 0.30 g/100g CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Negative/g Escherichia Coli Negative/25g Yeasts and Molds Max. 1.000.000 UFC/g Salmonella Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Sweet Corn: A Summertime Delight! Ah, sweet corn...the taste of summer barbecues, picnics in the park, and pure sunshine captured in a cob. This golden veggie isn't just delicious, it's also versatile, nutritious, and surprisingly fun! Here's why you should be celebrating sweet corn: Sweetness personified: Unlike its field corn cousin, sweet corn boasts a naturally high sugar content, resulting in that irresistible, juicy sweetness we all know and love. Nutrient powerhouse: Packed with fiber, vitamins, and minerals, sweet corn offers a healthy treat. It's a good source of vitamins B1, B6, and C, as well as magnesium and potassium. Versatility redefined: Beyond the classic boil-and-butter routine, sweet corn shines in countless dishes. Grill it, stir-fry it, roast it, blend it into soups, or add it to salads for a delightful crunch. Global inspiration: From Mexican elote slathered in crema and chili powder to Korean cheese corn with its gooey goodness, sweet corn takes on delicious avatars worldwide. Explore and experiment! Summer fun: Sweet corn husking contests, anyone? This veggie brings joy to summer gatherings, creating memories that last a lifetime. Tips to enjoy sweet corn at its peak: Fresh is best: Choose cobs with tight, green husks and plump kernels. The silk should be moist and brown, not dry and black. Cook it quick: Overcooking toughens the kernels. Boil, grill, or roast just until tender-crisp. Season it right: Butter, salt, and pepper are classics, but get creative! Try chili flakes, lime juice, herbs, or spices like paprika or cumin. Get creative: Make creamed corn, corn fritters, or add it to chowders and pasta salads. The possibilities are endless!
O-type coil 160 3.55 GB 3452.1) 5303010116000355 07 O type coil 175 3.55 GB 3452.2) 5303010117500355 07 Seal ring / oil seal ring AH0801010404 AH34001-04.06A Seal ring / oil seal ring AH1001010404 AH33001-04.06A Fender plate AH0801010405 AH34001-04.07 Fender plate AH1001010406 AH33001-04.08 Intermediate pull bar AH0801010406 AH34001-04.08 Intermediate pull bar AH1001010407 AH33001-04.09 Cross pin AH0801010407 AH34001-04.09 Cross pin AH1001010408 AH33001-04.10 Bolt M20X50 420201011120050000 Bolt M24X65 T502-7006K T52-7006K Lower guide plate AH0801010408 AH34001-04.11 Lower guide plate AH1001010409 AH33001-04.12 Fastening plate AH0801010409 AH34001-04.12A Fastening plate AH1001010410 AH33001-04.13A O-type coil 128 7 GB 3452.1) 53030101128007000 7 O-type coil 140 7 GB3452.1) 53030101140007000 7 Locking spring AH0801010410 AH34001-04.15 Locking spring AH1001010411 AH33001-04.16 O-type coil 103 5.3 GB 3452.1) 53030101103005300 7 O-ring 115 5.3 GB 3452.1) 53030101115005300 7 Gasket group AH100101041700 AH36001-04.03A.00 Seal gasket AH0801010411 AH34001-04.19 Seal gasket AH1001010413 AH33001-04.20 Cross pin baffle AH0801010412 AH34001-04.20 Cross pin baffle AH1001010414 AH33001-04.21 Cross head bearing 4G254735Q) AH0801010413 AH34001-04.21 Cross head bearing 5G254936Q) AH1001010415 AH33001-04.22 Pipe joint 3/8 "X2" AH1001010405 AH33001-04.07 Double lip oil seal 4 "x 5" x 0.5 " AH0801010414 AH34001-04.23A Double lip oil seal 4.5 "x5.5" x 0.5 " AH1001010416 AH33001-04.24A Adjusting gasket AH08010118 AH34001-20 Adjusting gasket AH1001010418 AH33001-04.25A Intermediate rod bolt M20X50 T502-7011 T52-7011K Intermediate rod bolt M24X65 T502-6005K T52-6005K Pinion shaft AH0501010302 AH35001-03.02A Pinion shaft AH0801010302 AH34001-03.02A Pinion shaft (wide groove) AH1001010302 AH33001-03.02A Wear resistant sleeve AH0501010303 AH35001-03.03 Wear resistant sleeve AH0801010303 AH34001-03.03 Wear resistant sleeve AH1001010303 AH33001-03.03 End cover AH0501010304 AH35001-03.04 End cover AH0801010304 AH34001-03.04B
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Overview of electric high platform ball valve: The electric high platform ball valve adopts a high platform design, which can be directly installed with the actuator without the need for a bracket, which provides convenience for product installation and replacement, and has the characteristics of small flow resistance and large flow capacity. The difference between the electric high platform ball valve and the ordinary ball valve with bracket is that it occupies a small space and has a compact structure. The disadvantage is that it is not resistant to high temperature, and the temperature is transmitted to the cylinder, and the rubber ring in the cylinder is easy to age. Although the ordinary ball valve and the actuator need to be installed with a bracket and a connecting shaft, the heat dissipation function is stronger. Usually, the pipeline with a high temperature usually adopts a ball valve with a bracket, which can avoid damage to the actuator due to high temperature and prolong the service life. service life. Electric high platform ball valve features: 1. It adopts high platform ISO5211 standard design, and it can be connected and installed with the actuator without other brackets and connecting shafts. 2. It adopts silica sol precision casting, beautiful appearance, tight and reliable, good sealing performance and wide application range. 3. Anti-static function, a spring is set between the ball, valve stem and valve body, which can discharge the static electricity generated during the switching process. 4. The fluid resistance is small. The full-bore ball valve basically has no flow resistance, and the opening and closing is rapid. It only needs to rotate 90�° from fully open to fully closed, and it is easy to operate. The electric high platform flanged ball valve adopts the spring plunger type electrostatic lead-out device, so that the direct form of static passage between the ball and the valve body or the form of static passage between the ball and the valve body through the stem tube, so that the ball and the valve seat can be The static electricity generated by friction during the switching process is led to the earth through the valve body, preventing fire or explosion that may be caused by static sparks. Static electricity is an objective natural phenomenon, which can be produced in many ways, such as contact and friction. For example, for high platform ball valves, when the ball rubs against the soft-sealed switch, static electricity will be generated. If the pipeline is filled with flammable and explosive media, it is very dangerous. Therefore, a connecting device is installed in the valve to guide the static electricity of the ball to the outside to prevent static electricity. is very important.
Wood burning sauna heater, solid sauna stoves, water heaters, smoke pipes, water tanks, different metal products.
Merrell, this cleaning spray mop wholesale sets on all sides maximum cleaning, 360° rotary mop head of the cleaning spray mop easily reach into the dark corners of sofas, bottoms, etc, and the mop heads can be used in dry or wet, and only need to push the trigger on the spray sweeper to activate the spray easy wet the mop. The infuse spray mop 3 in 1 makes cleaning effective and efficient, giving up the heavy messy bucket. With the newest upgrade infuse mop with the 400ML water tank and microfiber mop, you could fill it up with your favorite detergent, just make sure to clean the water tank when you finished the cleaning. Simply push the trigger on the handle, and the spray sweeper turns water to water mist evenly, saves water, and makes mopping more efficient than the regular mop. Detachable water bottle with infinite endurance when mopping the floor. As one of cleaning equipment suppliers, we can provide kinds of cleaning equipment in china for sale, anything you need, please contact us.
Fruits & vegetable containers, cookies & sweet packing containers, cakes & pastry containers, disposable juice cups, disposable coffee cups with lids, disposable cutlery sets like knifes, spoons, dinner disposable plates, food packing containers, drinking straws (paper & plastics), sushi trays & other food packing trays, food packaging paper bags like bakery bags, take way bags, sandwich packing bags bread packing bags, wine bags, retails shopping bags with handle, grocery brown bags, paper bags.
Plant Capacity- 8000 barrels/day Major Equipment- Flare Stack, RTRP Pipe, Duplex SS Pipe, Reciprocating Pump, Filter Feed Pump, Chemical Injection Skid, Flare Seal Vessel, Separator Vessel, Surge Vessel, Drain Vessel, 440V Switchboard, Diesel Generator, Distribution Board, Cables, Local Control Stations, Motor Operated Valves (Actuators), MOV Local Isolator, 440V Motors, 110V DC Supply Unit Process Description- The Water Injection Pilot is required to study the performance of Dharif Reservoir under water flood. The pilot will be located in Dharif field. The source water well will be located approximately 1.5 Km from the pilot plant. The pilot plant will mainly comprise of variable speed electro-submersible pump unit installed in source well (by others), 2 phase water / gas separator, drain vessels booster pumps, surge vessel, HP injection pumps, filtration plant for water quality maintenance, chemical injection skids for scale, corrosion oxygen and biocide control as well as for filtration aids, water transmission lines, guard filters, associated piping, instrumentation and controls, power generation auxiliaries and other utilities including air assisted flare system. The submersible pump installed in the source well will bring up the 4th sand reservoir aquifer water at about 375 psig pressure and flow it to the pilot plant, where water will pass through a 2 phase water / gas separator, filtration package (deep bed media filters), surge vessel and guard filter before the injection well head. The filtration system shall eliminate the particles higher than 1 micron before it is flowed into injection pump units. The pumping facility will be suitable to pump out water at flow rate up to 8000 BWPD at pressure ranging from 3000 psig to 6000 psig at the injection well head. Booster pumps will take suction from the 2 phase separator and pump the water through the filters to the Break tank from where the HP injection pumps will pump it to the injector well. The water pumped by the HP pumping facilities will then flow through a 4" dia. flow line to the injection well, Flow and pressure variation is achieved by the variable speed drive controller of the HP Injection pumps.
