[Product Name] Dipotassium EDTA 2K [Package Specification] Plastic bottle, 500g/bottle [Performance] White crystal powder, odorless, soluble in water, easy to absorb moisture, molecular weight of 404.6, pH value of 4.8�±1 (5% aqueous solution, g/ml), solubility in water â?¥ 60% (g/ml, 25â??). Stable at room temperature. The main content of EDTA in our company is â?¥ 99.0%. See the product test report for other indicators.� � [Scope of application]EDTA salt can protect the cellular components of the blood, does not affect the white blood cell count and size, has the least effect on the morphology of the red blood cell , and can inhibit the aggregation of platelets, which is suitable for general hematological test. Except for the isolation and examination of platelets, it is not suitable for coagulation test and platelet kinetic energy test, nor for the determination of calcium, potassium, sodium, iron, alkaline phosphatase, creatine kinase and leucine amino peptidase and PCR test. International Committee for hematology Standardization (ICSH) recommended dipotassium EDTA as anticoagulant for blood cell count and classification. Compared with tripotassium EDTA, it has lower solubility and slower anticoagulation speed.
INFORMATION ABOUT TECHNICAL MATTER USED IN BORDEAUX MIXTURE A) Common Name Technical Bordeaux mixture (Copper Sulphate neutralized with Lime) B) Chemical Name Technical Bordeaux Mixture (Copper Sulphate neutralized with Lime) C) Empirical Formula : Ca3Cu4H6O22S4nH2O D) Structural Formula : Cu4(OH)6SO4.3CaSO4.nH2O E) CAS Number : 8011-63-0 F) Molecular Weight : 968 G) Physical and Chemical Properties of technical material Colour : Blue Greenish Odour : No particular Odour Physical State : Powder Density : 0.5 Viscosity : Not Applicable Water Solubility : Insoluble Solubility in Organic Solvents : Insoluble Vapor Pressure at 20`C : Not Applicable Stability : Stable PH range at which is stable : Not Applicable Data on storage stability : Stable for 2 years at 5-25`C H) Information about patent use : None J) Purity : Copper Content 20.00% K) Impurities : Pb 50 ppm Cd 10 ppm As 5 ppm L) Name and trade of impurities being present more than 0.1% in the technical grade material. : None
The Tempered Glass Clean Booth (simple clean room) is a simple clean room for the fastest and most convenient establishment. Characteristic: 1. The clean room can be quickly installed in the existing ordinary environment, and improve the working environment. 2. Low cost, high speed and easy upgrading. 3. The structure is solid and can stand independently and freely. 4. Cleanliness: from Class 100 to Class 100,000 5. Application: Bio-pharmaceuticals, medical, food, photoelectricity, semiconductor and so on, improving the working environment. Characteristics of all the parts: Structure: epoxy powder coated steel or SUS stainless steel or aluminum alloy; Ceiling: steel plate or sandwhich panel or aluminum Wall: Transparent acrylic sheet is high in strength and low in price. The anti-static acrylic sheet may lead the surface static electricity to the underground to keep the surface from absorbing dust or fiber. It is applicable to modular clean room that requires high demand for cleanliness and static. FFU: Excellent energy-saving draught fan will be adopted, whose noise and energy consumption are on the low side. Meanwhile, the draught fan can be designated by customers, such as EBM of Germany. The casing is made of aluminized and galvanized plate, stainless steel or aluminum steel. Other optional accessories Air shower Delivery window Automatic door Fast rolling door
The Automatic Roller Shutter Air Filter is mainly used for air filtration at the air inlet of the blower room, preventing the blockage of the blower filter system and prolonging its service life. Primary filtration of industrial ventilation and air conditioning systems SPECIFICATIONS Frame material: Powder coating galvanized steel sheets/ SS Filter media: Polyester synthetic fiber EN779:G3,G4 US ASHRAE52.2: MERV6,MERV8 Power:1/4HP(250w) ADVANTAGES Using metal as he overall material,firm and reliable,meet the poorest working environments Intelligent filter replacement system , effective energy onservation , low costs Modular design to meet any type of system design and installation requirements Low high-end options for different materials and configurations to meet the needs of different customers. APPLICATIONS The Automatic Roller Shutter Air Filter is widely used in pre-filter of inductrial ventilation and air conditionerventilation system. The Automatic Roller Shutter Air Filter is suitable for high dust capacity environmentand the environments needs frequently change the filter material and constant air flow. PACKING AND DELIVERY 1.Packaging Details: Carton box and pallets 2. Delivery Details: 7-15 workdays 3. Means of Transportation: International express / air / sea 4. Loading Port: Qingdao
1. Quick Details Pro Name: Calcium Nitrate Tetrahydrate Other Name: Calcium Salt Molecular Formula: Ca(NO3)2.4(H2O) Molecular weight: 236.15 CAS NO.: 13477-34-4 Appearance: White monoclinic crystal or powder. Solubility: 100% Grade: TECH Grade / AGRO Grade 2. Packaging & Delivery Packaging detail: PP woven bag with PE inner bag in 25kg/50kg/1000kg or according to customer's demand. Loaded: 24mt/20'FCL with pallets, 25mt/20'FCL without pallets Delivery detail: Within 7-10 days Transportation: BY SEA 3.Specifications Analysis Item Specification Industrial Grade Agricultural Grade Assay 99.0% min 99.0 % min pH (50g/L) 5.5-7.0 5.5-7.0 Water Insoluble 0.05% max 0.05% max Fe 0.001% max 0.001% max Chlorideïas Cl 0.015% max 0.015% max Calcium Oxide - 23.4% min N - 11.7 % min
High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
High water-reducing rate: High water reduction efficiency at low dosage, giving the material system excellent flow. It can effectively improve the compactness and strength of the system, and the highest water reduction rate can reach 40%. High dispersibility: It has excellent dispersing ability, can absorb quickly and reduce mixing time.What's more,it endows the material system excellent workability and workability,therefore improves construction efficiency.It meets different construction requirements. High adaptability: It has good adaptability to various cement-based systems like ordinary Portland cement,sulfoaluminate cement system and Portland cement-sulfoaluminate cement composite system, and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. Early strength and high strength:By adding PC-1008, concrete performs excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be relatively reduced. High durability:PC-1008 enhances the compactness of the hardened slurry, improves the impermeability, erosion resistance and chloride ion penetration resistance, improves shrinkage and creep properties, and reduces cracks. Green and safe: It does not contain harmful substances and is an environment-friendly material.
Vanilla Beans Planifolia GRADE A Gourmet (100% ORGANIC Vanilla Beans) 25 Gram, 14-15 Cm original vanilla bean. Not like vanilli powder or essence that uses chemicals. Inside the stem are fine black and slightly oily grains that can be used as an additive (fragrance) to cake batter, drinks, and sweet desserts (ice cream, pudding, custard cream, etc.). Uses And Functions Of Vanilla Beans : 1. Vanilla Beans are commonly used to make cake and bread mixes, as well as add flavor to your drinks. Vanilla skin can be used to make Vanilla Sugar, by mixing it with sugar. Then, put it in a closed container and let it sit for a few days. After that, your sugar will have a very fragrant vanilla aroma 2. Vanilla is said to be good for health because it contains the chemical compound Vanillin which can balance cholesterol levels in the body. Vanilla is also rich in antioxidants that can fight free radicals. Vanilla also contains anti-bacterial properties so that if consumed regularly, it can cleanse the intestines & boost the immune system. The aroma of vanilla is also believed to make the body and mind calmer Storage Suggestion : Vanilla can be stored in a closed container, in a room temperature that is not humid. Avoid direct sunlight.
Product information Product name: OPTICALBRIGHTENER BA Color Index No: C.I.113 Synonyms: FBA 113; OBA 113,Fluorescent Brightener BA; Optical Brightener Agent BA Molecular Structure: Molecular Formula: C40H42N12O10S2Na2 Molecular Weight: 960.94 CAS No: 12768-92-2 C.I. No.: C.I.113 Appearance: straw yellow uniform powder E-value: 370 Features: Anionic, resistant to PH4.5-11. Applications Mainly used in pulp brightening, surface sizing and coating, etc, with high acid resistance. It is the first choice to produce paper of high brightness requirements Reference dosage: 1. When brighten in pulp, BA should be added before alum or cationic auxiliary agent; dosage: 0.05-0.4% (of absolute dry pulp). 2. In surface sizing, it can work with CMC, PVA, starch, or anionic or cationic synthetic sizing agent. 3. In coating, it can be used at any stage of coating production in the form of aqueous solution after dissolve. Package & Storage: 10kg or 25kg/ craft paper bags. It canbe packed in other forms according to user's requirements. Shelf life: not more than 24 months inthe room temperature.
Products Information: Products Name: OPTICALBRIGHTENER FP-127; Synonyms: FBA 378; OBA 378,Fluorescent Brightener FP-127; Optical Brightener Agent FP-127, FluorescentBrightener CBS-127; Optical Brightener Agent CBS-127, Molecular Formula: C30H26O2 Molecular Weight:418 CAS No: 40470-68-6 C.I. No.: C.I.378 Appearance: slight yellow powder Melting point: 219-221 C Assay:99% Fineness: 200 meshes Molecular Structure: Features Optical Brightener FP-127 hascharacteristics such as high whiteness, good colored light, good colorfastness, heat resistance, weather resistance and yellowing resistance andetc. Applications Itis especially suitable for whitening of PVC and polystyrene series products,and can also be used for whitening and brightening of other thermoplastics andcoatings, printing ink, synthetic fiber Reference dosage: Each 100kg material to add FP-127 brightening agent: 1. PVC: 1. White: 10-50 g 2.transparent: 0.1-1g 2. PS: 1.White: 1-50g 2.transparent: 0.1-1g 3.ABS: 10g-50g (eliminate the inherent yellow in ABS) Package & Storage: 10kg or 25kg/ fiber drums. It can bepacked in other forms according to user's requirements. Shelf life: not more than 24 months inthe room temperature.
Serial No. Materials Stock Available (in kilograms) 1 Basil Oil 1000 2 Camphor Oil 1000 3 Cardamom Oil 500 4 Cedarwood Oil 500 5 Citronella Oil 1000 6 Clove Oil 2000 7 Carrot Seed Oil 2000 8 Kapoor Kachri Oil 2000 9 Eucalyptus Oil 2000 10 Ginger Oil 1000 11 Jasmine Oil 2000 12 Jatamansi Oil 500 13 Lavender Oil 1000 14 Lemon Oil 2000 15 Nagarmotha Oil 1000 16 Orange Oil 1000 17 Palma Rosa Oil 2000 18 Patchouli Oil 2000 19 Saffron Oil 500 20 Sugandh Mantri Oil 1000 21 Sugandh Bala 500 22 Gendha Oil 1000 23 Tagetes Oil 1000 24 Rose Water 10000 25 Ruh Khus 500 26 Rose Oil 1000 27 Chandan Oil 100 28 Chandan Wood Chips 5000 29 Nagarmotha Jadiwati 10000 30 Ruh Gulab 5 kg 31 Ruh Kewda 5 kg 32 Kewda Attars 10000 33 Chandan Powder 1000 34 Mitti Oil 5000 35 Flavors & Fragrance 5000
Product Description SPC flooring stands for Stone Plastic Composite. The main component is lime stone (calcium carbonate)+ PVC Powder + Stabilizer. Different from regular vinyl floor, there is no plasticiser inside, so it is more environmentally friendly. SPC flooring mainly structured with the UV Coating , abrasion resistant paper ,decorative paper film and core board. Meanwhile IXPE& CORK option available for high end usage. Process Mixer (mixing the main materials and additives) SJSZ 80/156 conical double Screws Extruder Mould Lamination unit Three-calender unit Cooling Bracket Hual-off Machine Edge Cutting Cutter Stacker UV coating machine Machine List Raw materials Mixing system 1. Spiral Loader 1 set 2. High speed Heating cooling Mixer unit 1 set PVC imitation marble sheet extrusion line 1. Spring Loader 1 set 2. Conical double screw Extruder 1 set 3. Mold/Die head set 1 set 4. Three-roller calander with film hot-stamping device 1 set 5. Cooling frame with side cutting 1 set 6. Haul off unit 1 set 7. Cutting machine 1 set 8. Discharging stacker 1 set
Product Description SPC flooring stands for Stone Plastic Composite. The main component is lime stone (calcium carbonate)+ PVC Powder + Stabilizer. Different from regular vinyl floor, there is no plasticiser inside, so it is more environmentally friendly. SPC flooring mainly structured with the UV Coating , abrasion resistant paper ,decorative paper film and core board. Meanwhile IXPE& CORK option available for high end usage. Process Mixer (mixing the main materials and additives) SJSZ 80/156 conical double Screws Extruder Mould Lamination unit Three-calender unit Cooling Bracket Hual-off Machine Edge Cutting Cutter Stacker UV coating machine Machine List Raw materials Mixing system 1. Spiral Loader 1 set 2. High speed Heating cooling Mixer unit 1 set PVC imitation marble sheet extrusion line 1. Spring Loader 1 set 2. Conical double screw Extruder 1 set 3. Mold/Die head set 1 set 4. Three-roller calander with film hot-stamping device 1 set 5. Cooling frame with side cutting 1 set 6. Haul off unit 1 set 7. Cutting machine 1 set 8. Discharging stacker 1 set
[Product Name] Tri-potassium EDTA [Formula] EDTAK3 ·2H2O [Package Specification] Plastic bottle, 500g/bottle [Performance] White crystal powder, odorless, soluble in water, easy to absorb moisture, molecular weight of 442.56, pH value of 7.3 ±1 (5% aqueous solution, g/ml,), solubility in water 60% (g/ml, at 25 ). Stable at room temperature. The main content of tri-potassium EDTA 99.0%. See the product test report for other indicators. [Application] This product is specially used for in vitro anticoagulation of blood, and is an anticoagulant additive for clinical blood test. It is used for blood sample pretreatment (anticoagulation treatment) in the process of clinical blood collection and test. [Scope of application] EDTA salt can protect the cellular components of the blood, does not affect the white blood cell count and size, has the least effect on the red blood cell morphology, and can inhibit the aggregation of platelets, suitable for general hematological tests. Except for the isolation and examination of platelets, it is not suitable for coagulation test and platelet kinetic energy test, nor for the determination of calcium, potassium, sodium, iron, alkaline phosphatase, creatine kinase and leucine amino peptidase and PCR test.
[Product Name] Dipotassium EDTA [Package Specification] Plastic bottle, 500g/bottle [Performance] White crystal powder, odorless, soluble in water, easy to absorb moisture, molecular weight of 404.6, pH value of 4.8�±1 (5% aqueous solution, g/ml), solubility in water â?¥ 60% (g/ml, 25â??). Stable at room temperature. The main content of EDTA in our company is â?¥ 99.0%. See the product test report for other indicators.� � [Scope of application]EDTA salt can protect the cellular components of the blood, does not affect the white blood cell count and size, has the least effect on the morphology of the red blood cell , and can inhibit the aggregation of platelets, which is suitable for general hematological test. Except for the isolation and examination of platelets, it is not suitable for coagulation test and platelet kinetic energy test, nor for the determination of calcium, potassium, sodium, iron, alkaline phosphatase, creatine kinase and leucine amino peptidase and PCR test. International Committee for hematology Standardization (ICSH) recommended dipotassium EDTA as anticoagulant for blood cell count and classification. Compared with tripotassium EDTA, it has lower solubility and slower anticoagulation speed.
[Product Name] Sodium heparin [Package Specification] Plastic bottle, 10g/bottle, 20g/bottle, 50g/bottle [Product Standard] Q/WHDS 003-2016 [Product Performance] White amorphous powder, odorless, soluble in water, easy to absorb moisture, average molecular weight of 15,000, stable at room temperature. The potency of sodium heparin of our company is â?¥150 IU/Mg, and the potency of anhydrous sodium heparin is â?¥ 160 IU/Mg. Other indexes were controlled according to sodium heparin standard. � [Scope of application] 1. This product is applicable to the collection and anticoagulation of blood samples for clinical biochemical examination and emergency biochemical examination, and also applicable to the collection and anticoagulation of blood samples for some hemorheology projects. � 2. The use of sodium heparin as an anticoagulant is recommended for the determination of ion content in blood in clinical tests because it is the least likely to interfere with the determination of other ions. 3. This product is not a drug and cannot be used as an injection. Direct injection into human body and animals is prohibited.
Rubber Adhesive GLR-806 / Rubber Adhesive CYREZ 964 / Rubber Adhesive HMMM / Rubber Adhesive RA-65 / Rubber Adhesive HMMM-65% Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 65% + inert carrier (white carbon black) 35%. 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 9011-5-6 Technical Specifications: Appearance: White powder Ash content (850deg): 29~35 Water content % max.: 4.5 Sieve residue (325 mesh) % max.: 0.3 Free formaldehyde content % max.: 0.1 Application: 1. It can promote adhesive force for rubber and steel cord or fabric cord. 2. Suggested ratio: 2-5 poses Rubber adhesive RA-65 with 2-5 poses resorcinol formaldehyde resin. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Shelf life is one year.