The compression springs are an open coiled type, used where a load or force is required when compressed, or to store energy in the compressed position. A compression spring offers resistance to compressive forces. The rings are wound around, and both ends can be open or closed or flattened or flatten due to the pressure. The shape of the waist and even the various tails can be deformed by design. It is one of the most widely used of all kinds of springs. Typical applications for compression springs include: Aerospace Valve Spray Off-road equipment Automotive Switches Fluid/air control
The rings are tightly circumferential to make it stretchable. It is a representative of a typical spring. All shapes can be shaped according to the design. This extension spring is made by advanced automation machine with high temperature to strengthen and finalize the shape, which has high accuracy and good stability. And it has been proved by experiments that it can stand more than 100,000 times of fatigue testing.Typical applications for compression springs include: Electronic products Children toys Baby carriage Bicycle Kitchen appliances Cameras Printers, Office equipment
A torsion spring is a device used to give support and cushion movement in several types of components. There are two distinct types of torsion spring. The first is not a spring at all, however, it has torsional or spring-like properties and is called a torsion bar. The second one is actually a helical-wound spring, such as the type of spring used in a common mouse trap. The torsion bar is commonly used in automobile chassis, as well as trailer suspensions. Typical applications for torsion springs include: Computer Camera Door Machine Electric appliance Furniture
It is similar to torsion spring. Because of high torsion force and a twisting moment of multiple angle, it is used for a long time to perform work function. It can be used in tape measure, car starting motor, receiving wire box. etc.
These products are generally designed for customers in different shapes and are generally used as accessories or components. (1) Variable diameter spiral spring: it is used in some special occasions. The material of variable diameter spring is generally circular section material, and most of them bear compression load. (2) Slice spring: the material of this spring is strip (or plate) for spring, which is processed by corresponding mould on special equipment or general pressure processing machine. The material thickness of leaf spring, wave spring and light spring is relatively thin, while the material thickness of medium or large disc spring is usually relatively thick, and this kind of spring is also widely used. (3) When the installation space is limited, the spring with rectangular cross-section is often used, because the spring made of rectangular cross-section material can obtain larger load under the same space and the same deformation. Compared with the spring of circular section material, this kind of spring has large sectional area in the same space, so it absorbs more energy, as shown in the figure below. It can be used in heavy machinery, stamping die or spring with great rigidity.
It refers to the product that the steel/non-ferrous metal and other plates are used in the mold, and the pass is provided with the pressure to be formed under the condition of room temperature. It is widely used in various fields of our life, including some electronic devices, auto parts, decorative materials, etc.
Product description of the Hospital Elevator factory The medical elevator pays attention to the humanized design, creates the clean and bright space in harmony with the hospital environment, meets the hospital's various special use needs to the greatest extent, and assists the medical staff to complete the sacred mission efficiently and quickly.
With advanced technology and perfect functional configuration, the passenger elevator integrates advantages of high configuration, high efficiency, intelligence and energy conservation, and makes full use of advanced technologies in multiple fields such as information, environment and energy to contribute to creating colorful urban life.
A bleed air system uses a network of ducts, valves and regulators to conduct medium to high-pressure air, "bled" from the compressor section of the engine(s) and APU, to various locations within the aircraft. There it is utilized for several functions inclusive of pressurisation, air conditioning.
The pitot-static probes mounted on aircraft sense altitude, airspeed, rate of climb, and other related parameters, which are then transmitted to the indication and sensing system.
VHF-Transceiver Used in VHF communication systems for maintaining contact between ground and aircraft.
There are two sensors that each landing gear that play the main role, namely the lock-up sensor and the drop-down sensor, which are used to switch on the transmission position signal when the lock-up and lock-down are completed in the landing at take-off phase.
Garlic from China. in boxes.
80x30mm HOMAG Edgebander Track Pads Converyor Chain Pads These rubber tracking pads for conveyor chain, widely use on edgebanders, such as HOMAG Brandt and Chinese brand edgebanding machines. Edgebander Chain Pads Features: Pad size:80x30x18mm Track Pad Material: PA + Rubber Characteristics: High temperature resistance, wear-resistant, long working time etc. Usage: Used on automatic edge banding machine, such as HOMAG, Brandt, etc. Remarks: We also can provide customized machinery accessories as customer's requirments. For any edge banding accessories not listed, please contact us for our matching part or a custom-designed part manufactured specifically for your requirements. RicoCNC also can supply rubber wheels for BIESSE, SCM, IMA, Homag edge bander machines. Welcome your inquiry!
Biesse air table valve Biesse valve code L9402403100 Biesse Selco float air table valves White valve insert for Biesse floation air table Shut-off valve desktop for Biesse beam saw Air ball infeed table for BIesse panel dividing saw Air table valve for Biesse Selco Vacuum ball bearing for Biesse selco Air floating cell for Biesse Selco Biesse Selco Beam Saw Air Table Valve L9402403100 This Biesse L9402403100 air talble valve insert is for Selco beam saw float table, it is the shut-off valve. The size of beam saw valve size 15x14mm. RicoCNC supplies a range of air table valves for beam saws such as Homag, Holzma, SCM, Gabbiani, Giben, HOLZHER, Casadei, Anthon, Schelling, Mayer, Panhans, Hendrick, etc.
Model: 2 in 1 Material: HSS (high speed steel) Sizes: optional HRC=66~69 Good for soft wood and semi-hard wood turning HSS lathe knife cutters for woodturning copy cnc lathe machine This HSS lathe knife cutter is an useful woodturning tool, widely used with woodworking cnc copy lathe machine. The woodturning cutter is made of super hard high speed steel, great Hardness, wear-resisting, heat-resisting, HRC=66~69. The hss wood lathe cutter is great for soft wood and semi-hard wood turning. If you want to lathe beech and red oak, we have top quality lathe tools made of Swiss imported HSS, hardness HRC=68~70. HSS Wood Lathe Knives Sizes: 12mm*12mm*200mm 14mm*14mm*200mm 20mmx20mmx200mm 22mmx22mmx200mm Longer models: 20mm*20mm*300mm 22mm*22mm*300mm 25mm*25mm*300mm HSS Wood Lathe Cutter Blades Features: 1, 2 in 1, one blade body with a clamp for fixture. 2, Super hard, HRC=66~69. 3, Can be polished 4, Material is High Speed Steels (HSS) 5, High precision 6, Durable
Features: 1.Sealing is energized by flow fluid pressure, sealing performance gets better while pressure increasing. 2.Hard-faced sealing surface and sulfur-resistant core material assure fine performance of wear-resistant and corrosion-resistant. 3.Integral forged body with fine mechanical properties. 4.Check valve shall be hydro tested prior to delivery for safe performance. Specifications: Product Name: API 6A Swing Check Valve, Lift Check Valve, One-Way Valve, Non-Return Valve Nominal Bore: 1-13/16" - 7-1/16" Material: AISI 4130 (Integral Forged) End Connection: API 6A Flange Standards Applied: API Spec 6A, API 16C, NACE MR0175 Pressure Rating: 2000 PSI to 15000 PSI Material Class: AA, BB, CC DD, EE, FF Temp Class:� L, P, R, S, T, U, V Performance Requirement: PR1, PR2 Product Specification Level: PSL1, PSL2, PSL3, PSL4 Paint Color: Red or Customized Application: Mud Choke Manifold, Kill Manifold, Wellhead Christmas Tree Connection
The cinnamon tree has a trunk with a diameter of 125 cm. The texture of the stem is smooth and has branches. The plant has a variable height depending on the type of cinnamon. For example, Cinnamomum zeylanicum, a cinnamon tree that comes from Sri Lanka has a height of up to 5-6 m. Meanwhile, Cinnamomum burmannii which grows a lot in Indonesia can reach a stem height of up to 15 m. The most commonly used part of the cinnamon tree is the bark part of the trunk. The appearance of cinnamon bark is generally brown to yellowish-brown.
The combination of the HP 641552-001 hard drive with the 651687-001 caddy provides a reliable and high-performance storage solution for HP ProLiant servers. Brand:: HP Part Number :: 641552-001 Capacity :: 300GB Interface :: SAS 6.0 Gb/s Type :: SAS (Serial Attached SCSI) Hard Drive Size :: 2.5 Speed :: 10000RPM Data Transfer Rate :: Up to 6 Gb/s Caddy Part:: 651687-001 ** Quantity:: 608 pcs
Hydraulic Dish Press is manufactured with a pressure pre-release unit equipped with minimum hydraulic shock. Manpower is needed in its work. Hydraulic dishing press can be used for drawing, bending, printing, forming and part dropping processes for sheet metal, production of fine ceramics and high-tech materials, tungsten alloys, teflon parts. The hydraulic dishing press is long-lasting due to the robust structure of its design.
