IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12S Syringe Pump The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance and precise control over fluid delivery processes. Key Features: Wide Syringe Compatibility: The IPS-12S accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12S ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12S offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12S offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12S enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
RB 1530-H water jet plasma CNC cutting machine is high performance heavy duty metal plasma cutting machine, especially suitable for cutting stainless steel and carbon steel with clean cutting edge quality. It adopts servo motor and driving device, and is equipped with water mist jet cutting torch which uses a professional braided tube to wrap the torch cable to prevent the high frequency in the torch cable from interfering with external equipment. Specifications of RB 1530-H water jet plasma CNC cutting machine: 1. FANGLING controller. This cutting machine numerical control system is suitable for all kinds of flame/plasma. high-pressure water jet. laser cutting machines. and is widely used in metal processing. advertising. stone and other industries. The system has a highly reliable design and has the ability to resist plasma interference. lightning strikes. Practical flame/plasma cutting process. during plasma processing. the corner speed control and height controller control are automatically completed; remote operation can be achieved with a wireless remote control. 2. High performance plasma cutting machine power supply. Torch cooling system built inside, which is with high-lift pump and high power radiator to reduce the consumption of torch consumables. Excellent HF arc striking control technology and separate structure of HF controller & power source, which highly reduces HF interference. Gas control separate from the power source: shorter gas circuit, more stable gas pressure with good cutting quality. 3.Plasma torch. REBOUND fine cutting torch Strong perforation ability, good cutting perpendicularity, smooth cut surface. For cutting processes with different currents and metal materials, consumables with good cutting quality are matched. 4. Servo driving system. 5. Automatic Arc Voltage Height Regulator The automatic height adjustment system of the torch controlled by closed-loop PWM is used to keep the height of the plasma CNC cutting machine torch to the steel plate constant during the plasma cutting process. Control the height of the cutting torch during the cutting process by detecting changes in the arc voltage. Ensure cutting quality and work efficiency.
This light gantry CNC plasma cutting machine doesn't have working table, so it can withstand heavy cutting of iron sheet. When we ship this machine, we can dismantle the whole machine, the packing size is only 4 cbm. So this can save a lot of transportation costs. It can be equipped with any plasma power supply, such as China Huayuan, American Hypertherm and so on. Applicable Materials: Sheet and tube of carbon steel, stainless steel, aluminum, copper and other non-ferrous metal . Features of light gantry CNC plasma cutting machine: 1. Two cutting modes optional: plasma plate cutting and tube cutting. 2. Gantry structure, perfect bearing capability. The machinesâ?? body is strong, rigid, high precision, reliable and durable. 3. Adopt well known plasma power USA Hypertherm supply and cutting torch. 4. Cutting edge is small and smooth ,without any drop outs, thickness for metal cutting is up to 30mm. 5. With Arc voltage Auto Height-adjusting Device, arcing success rate over 99% and can protect cutting torch from damage, increase cutting quality. 6. Adopts Imported high-precision Hiwin Linear guide rails, smooth movement, to ensure that the machine tools high-precision. 7. Drive gear and rack ,customized from professional manufacturer, is surface processed by cemented quenching, which can prolong machineâ??s using life. 8. Step and Servo drive system is available, which with features of function detecting ,high running precision, wide speed range and short speed up time. Parameters of light gantry CNC plasma cutting machine: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Working Size 1500mm*3000mm Max Cutting Speed 20000mm/min Cutting Thickness(Plasma)(mm) 1-30mm Power 45A/65A/85A/105A/125A/200A Precision �±0.01mm File output mode USB interface Command Code G code/*.MMG/*.PLT/*.eng Packing type Standard plywood case Table Saw tooth table(Optional Blade table) Weight 1500KG
In addition to being used for storage and transportation, liquid nitrogen tanks can also be used for self-pressurizing liquid nitrogen tanks that combine storage and transportation, and are only used for rehydration of other liquid nitrogen containers. The self-pressurizing liquid nitrogen tank belongs to the "YDZ" series. It has the same vacuum insulation + internal and external double tank structure as the "YDS" series, but the YDZ has no caliber and controls the inlet and outlet of liquid nitrogen through valves. Features of self-pressurizing liquid nitrogen tank: 1. It is manufactured in accordance with the national standard GB/T 14774-2012, and users have evidence to follow; 2. Both the inner and outer bladders are made of 304 stainless steel, which has strong load-bearing resistance, good low-temper ature resistance and good heat insulation, and is easy to clean; 3. The three valves, boosting valve, venting valve, and liquid inlet and outlet valves, are all low-temperature control valves, which are durable and stable; 4. Equipped with double safety valves and double protection to prevent users from misoperation causing excessive pressure and causing danger; 5. Equipped with a pressure stabilizing system device to stabilize the pressure and liquid nitrogen flow rate to prevent sudden increases and drops in pressure from causing liquid nitrogen to splash and injure people; 6. The movable casters at the bottom are not only flexible, but also have high load-bearing capacity, so you can use them with confidence; 7. Special vacuum technology ensures a low liquid nitrogen evaporation rate; 8. After strict low-temperature testing before leaving the factory, it can enjoy a 5-year vacuum warranty and a 1-year free warranty service; Advantages of self-pressurizing liquid nitrogen tanks: 1. Low pressure is safer In addition to self-pressurizing liquid nitrogen tanks, there are also medium and high-pressure Dewar bottles that can realize liquid nitrogen replenishment. The difference lies in the pressure and whether annual inspection is required. The self-pressurizing liquid nitrogen tank has a low pressure within 0.1MPa and has no pressure when not in the infusion state. It is not a pressure vessel and does not require annual inspection, which is safer. 2. High efficiency in outputting liquid nitrogen Although the pressure is low, the infusion speed of the self-pressurized liquid nitrogen tank is not slow. When it is fully filled, it only takes 20 seconds to pressurize it to the standard pressure; the liquid nitrogen storage capacity is 3/4, which takes about 1 minute. And it relies on the internal pressurization system to pressurize, without contact with external air, and the purity of liquid nitrogen is guaranteed. In addition, self-pressurizing liquid nitrogen tanks can be equipped with solenoid valves to achieve automatic replenishment.
Kit,Secondery Retention Air Sw F/Tds 2039481-503 Brake device accessories ZJ50L Pin shaft KQ-10 in open clamp KQ-10 Beijing Pushike Set Lower Engine Gasket MPN#3802375 One way clutch accessories ZJ-30 PTO IT-454 51212-24 PIN, DOWEL, TDS Drill pipe power tong accessories ZQ203-100/125 bearing cover 0102-19M Hydraulic tank accessories F-1600 Drain strainer gland Drill pipe clamp accessories ZQ203-125 Frontal pin 19.100-24 Winch intermediate shaft accessories ZJ32L6 axis AF32002-06.18 MWM diesel engine accessories electrical instrumentation system * hose 623409390444 TBD236V8 Seal:Piston 108894-P32 M614002913-09 GLAND,M25X1.5,EX,ARMORED-CABLE,NON-POTD Ecceentric F/Guide Frame 2028044 Five-way valve A35-AA4.MB53.2MA53.2XDR53.Z16 HOSE. Catalog number: GB3683-2006. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100. 35Ã??35 BOP AccessoriesFZ35-35 adjusting gasket 2FZ3535.11-06 FRICTION DISC W36-07-905 Bearing: Roller Tapered 30116803 Natural electricity of other logging toolsBit Probe SPA-A-SH Schlumberger transmission no. 1 TransmissionShaft accessories ZJ-45J 1# with pump shaft assembly SHIM, COMPOUND GEAR 120262-2 SCREW, HEX HD, 1/2-13 UNC-2A X 1.00 LG 50008-8-C5D Wear plate 1 1.03.16.201 Drill pipe clamp accessories ZQ203-125 Right angle connector 14.09.01-02A Lower sleeve DG225-24 of hook DG225 35Ã??35 BOP accessoriesFZ35-35 hinge pin 2FZ3535.11-08 56507-8-8-S TEE, BRANCH 37/37/EXT PIPE Filter\TDK ZAC 2205-00U-10A/250V ZQ203-100 High pressure hose M30*1.5C*1500 05-11M Turntable climbing shaft II accessoriesZJ-45 fast rope rubber roller Logging tool accessories horizontal well tool TQ402-CQ female gun measuring rod JCGJ-42-02 Drilling rig special air control element bidirectional air guide faucet QF516 Gland: Cable, ,Non-Armr, M20 x 1.5, EX M614002958-03 ACCUMULATOR ASSY MODEL NXQA-6.3 35Ã??35 BOP accessoriesFH35-35/70 piston wear reducing ring JK10113C-18 Drilling rig top drive accessoriesDQ-70 filter element IX160*80 Drill pipe power pliers accessories ZQ203 door stop 100 HZ-400-00 Turntable cat head shaft accessories ZJ-32 Sprocket BA70011-03.17 161100172 ORIFICE PLUG, 1/4 NPT X .205 110844-52 Brake device accessories ZJ-40 High pressure spherical globe valve ZY-YT0-T10B M10085 CLAMP, HOSE, GEAR-TYPE, 9.38-12.25 Drill pipe power tong accessories ZQ203-100 Three-way valve QF501B 190 series diesel engineParts electrical instrument system * tachometer G12V190 ZD85F 85046-3 BAR,BRIDGE,FIXED,PHM1 Power selection box accessories SNC40-17 Plunger Packing 5" Cloth V-ADDITIVE SEALING RING FOR AIR PUMP FOR BOP CONTROL UNIT, BPM, P/N:9165201002 Turntable cat head shaft accessories ZJ-32 Friction hub BA70011-03.29 Self-aligning ball bearing 2221 West shaft Drill pipe tong accessories ZQ203-125 bearing 22314 GB/T288-1994 SHAFT(ZZ020005) BG-082001-0206 VOLVOFM12 coolingElectrical appliances * door control module 2058035 50006-4-C5D SCREW, CAP-HEX HD DRILLED
Drill pipe tong accessories ZQ203-100 large piston 02-02M Diesel generator set accessories ONAN-HDKAL-6.0 oil pressure sensor 193-02* 190 series diesel enginePieces engine * low oil pressure automatic parking device 8V.34.00A 50004-4-C5D SCREW, CAP-HEX HD DR ND1250 lubricating*motor oilFilter element 1R-0739 156100300 IMPELLER FOR CENTRIFUGAL DERRICK PUMP, SIZE : 4 Ã?? 3 Ã?? 10 , P/N: G0006188 Winch drive shaft accessories ZJ-32J Input shaft sprocket Valve:Reducing/Relieving F/Tds-9S 109858-1AN Sealing parts SL-225RG 25XGZ-3K transmission no. 1 TransmissionShaft accessories ZJ32L6 Friction drum BA70012-02.02 Valve Cartridge Needle 97631-2BN Special accessories for cementing tools XJT193.67 casing circulation joint 7 5/8" (trapezoidal buckle)*410 Hydraulic valve DHA-0631/2/M/7 24DC 24 VOLVOFM12 chassis*Door lock cable Diesel generator set accessoriesC550D5 QSX15G8 valve oil seal 3927642 654611 SPACER,LOWER HP-650 SWIVEL VLV,HYD DIR H10053 Brake device accessories ZJ-30L rope stick Light bulb 0405-0045-00 7K 6.3, 6V NB800G.05.21 Piston rod Hydraulic tank accessories F-1300 Hydraulic cylinder assembly AH36001-05.01A.00 M23-1004-010 FS-0250NC-0075 CAPSCR, FLAT HD SOC, 1/4-20UNC x 0.75 Drill pipe clamp accessories ZQ203-100 Shield Ring, Bearing Retaining 6910106 Drill pipe clamp accessories ZQ203-100 takes over 010804-02M Desander accessories RSD/CSQ300*2-P sand sink 25mm One way clutch accessories ZJ-50D hub BA7002-06.21B Turntable climbing shaft II accessoriesZJ-45J electromagnetic brake seven-core cable 35Ã??35 BOP accessoriesFZ35-35 right door 2FZ3535-02 Bearing :Mt Roller Cylindrical 200 X 109521 Cylinder liner piston accessories F-1600 cylinder head AH36001-05.03 CHANGE VALVE, EX PROOF ELECTROMAGNETIC, FOR AIR CONTROL SYSTEM, MODEL: ZJ467.51.00 ND3128 Body chassis*through shaft lock 190 series diesel engineParts and intake exhaust system * intake pipe (second from the right) 12VB 08 20 15A REDUCER, 1"NPT x 25mm 56600-15-12 Casing power tong accessories TQ340-35Y retaining ring 85 GB893.1-85 Brass flat head screw, P/N:2831-3, Carlson 8004 Anti-magnetic short for other logging toolsSection GPIH-B-SH SFT 270-SH Schlumberger Rod clamp accessories ZQ203-100 Clamping cylinder rear cover 0105-02M CAVITY PLUG 93667-M13 Electric sprinkler accessoriesF-1300 vertical clear water spray pump 32L SPINNER SHAFT, MATCH ROLLER KEY, TM-ALL AY50825 Check Valve 94537-175N Detroit diesel engine accessories crank linkage * crankshaft rear oil seal 16V149 23511639 Drill pipe hanger accessories ZQ203-100 joint 010810-02M 654517 SPACER,MIDDLE COUPLING, ELASTOMERIC 120535-1-1-01 56502-12-12S ELBOW, 45DEG EXT PIPE/37 RADIATOR ; 14.14.00.00C6; ENGINE DETROIT DIESEL SERIES 149; ANTIFREEZE, 210 X2440 X3090 mm, Alloy, Steel M01-1062-010 BRAKE PADS SET ROTARY TABLE ZP-375 IDM 7080080 88153 PIN,ARM,PIVOT,1.0DIAX6.0,17-4 TIE, CABLE (TY-RAP) 53300-523 VALVE,RELIEF 7500432+70 Cable for operator panel 4061113
Z07120000063AA Lift cylinder Bearing: Thrust Main, Tapered Roller 2028017 DT50149 CASING WEAR PLATE , 4 �? 3 �? 13 INCH-P/N: G0006074, BRAND : DERRICK Screw 50070-025F06 Cable : Safety For Top Drive Tds11S 110078-L18 59024P170014 HOSE ASSY M11229 141101703 161100349 MAN33.373DFC transmission* oil seal 06.56279-0331 ROLLER, FOR POWER TONG, MODEL: 16-25, MAKE: WEATHERFORD, P/N: 100046-001 Brake device accessories ZJ-40 Manual stop valve LT07MAK-2X/100-02M 110563-11 PLUG, R1 1/2, ROTARY TABLE, ZP 375, HH ZP001.16 GT350E Cooling Appliance*Anti-fog lights Electric control box FKDQ640-7 Explosion-proof alarm BBJ-T DC24V O-Ring (30174447-Lh-Lb) 51300-276-B BUSHING 1-3/4" EP-1000864 transmission no. 2 transmissionShaft accessories ZJ-45 transmission shaft assembly BA70002-12.00 E04-5047-010 LOCKNUT, CONDUIT FTG, 3/4 NPT Drum shaft accessories ZJ70DB nut M16 106.06.20.43 SPLINE. Catalog number: GB1095-1979. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100 S10232 Stuffing box 1.06.15.001 Roller shaft accessories ZJ32L6 axis AF32004-02.03 Nut:Hex-Sltd [Unc-2B] F/Top Drive Tds11S 50506-C hydraulic hose 2.4.21.068 Oil Filter, p/n P551670. DONALDSON Drilling rig top drive device accessories DQ-70BSC flush tube O-ring 5303001830 Hanger accessories F-1600Crosshead lower guide plate AH36001-04.17 MAN33.373DFC Variable Speed Gearbox Output Shaft Bearing 74004 GAUGE, SIGHT, OIL 6600/6800 KELLY VOLVOFM12 lubrication*Oil pan gasket Drill pipe hanger accessories ZQ203-125 tooth plate 19.100-12 Drill pipe tong accessories ZQ203-100 Idler Z=24 m=12 0102-02M ENCODER LOW TEMP, DIGITAL M614003119-BSC 161100259 Relay 24VAC/DC 8NO/1NC PSR-SC INT.SIEM 3VL27121DC330AA0 00A15C001.084 STABING GUIDE ASSEMBLY 118250 Remote Console Accessory FKQ6406 Bottom pipe union ZG 11/2*50MPa (thickened) TEE, SWIVEL INT 37/37/37 56525-6-6-S TUBE ASSEMBLY UNL ADAPTER/MANIFOLD 30125094 35�?35 BOP FH35-35/70 adapter ring inner sealing surface FW1305.11-00 CUTTING FERRULE JOINT, FOR DRAWWORK- HPU, MODEL: YZ096, MAKE: HONGHUA, P/N: 1CH9-26-22OG/RN Drill pipe hanger accessories ZQ203-100 fork head 0104-10M Compensation for other logging tools Sub-lithology density micro-column focused logging tool PEX150-SH Schlumberger Hydraulic cylinder DT11397 Canrig Seal: Rod Proprietary 10858306-001 NK400E Universal Hydrating WaterFlat cylinder hydraulic hose 30119143 GLYD RING ROTARY 11.5ROD Hydraulic tank accessories F-1000 Stem guide (bottom) AH33001-05.24.00 C500K Brake Rear Brake Shoe 811598 On SEAL RING, PISTON FH84.7 Cap Screw,Vc-20X1" Lg Gr5 F/Tds National 50004-08-C5D Winch drive shaft accessories ZJ32L6 gear spline AF32002-10.10 Roller shaft accessories ZJ-45Roller flower nut M30 Elevator drill pipe elevator C DZ 139*139mm 2250 Drilling rig top drive accessoriesDQ70â?¢-A baffle �?47 1.11.11.091 VALVE, COUNTERBALANCE (CBCA-LHN) 30173386 35-35 BOP AccessoriesFZ35-35 gate body fully sealed JK212-40S-1-1
Frozen chicken, pork, frozen beef, chicken feet, chicken paws, chicken, sunflower oil, soybean oil, canola oil, red kidney beans, beans, white beans, lentils, chickpeas, chana dal, green mung beans, black eye beans, sesame seeds, soybeans, yellow corn, white sugar, compressor scrap, scrap, used electric motor scrap, copper wire scrap, oranges, fresh fruits, lemons, mandarines, limes, apples, pears, guavas, soda ash, caustic soda, uht milk, milk powder, peanuts, groundnuts, ldpe, hdpe, lldpe, polyvinyl chloride (pvc), polystyrene (ps), polypropylene (pp), polycarbonate (pc), polyphenylene oxide, used cooking oil, used engine oil, virgin granules, used blue drum scrap, recycled granules, bitumen, beef omasum, alfalfa hay.
Almond nuts, black pepper, honey, walnuts, cashew nuts, corn meal, fish meal, soybean meal, black raisins, golden raisins fresh garlic, fresh ginger, red chilli, okra, golden linseeds, green cardamom, green lentils, groundnuts, macadamia nuts, madagascar clove, red onions, sesame seeds, soybean seeds, pistachio, sisal fiber, vanilla beans, green asparagus, white pepper, yellow corn, kidney beans, red beans, speckled beans, white beans, corn oil, soybean oil, sunflower oil, vegetable oil, arabica coffee, robusta coffee, arowana fish, black tiger shrimp, chia seeds, chickpeas, dry anchovy, dry mango powder, fertile duck eggs, fresh color capsicums, fresh brown eggs, fresh brown eggs, fresh habanero peppers, fennel seed, tea, hatching finch eggs, sunflower seeds, ox cow gallstones, fresh onions, black pepper, yellow corn, a4 paper, aluminum scrap, hms, used rails, copper scrap, copper cathode, coltan, natural hazelnut kernels, alternator and motor scrap, iron ore.
Beauty care and perfumes, grocery, watches, toys and games, clothing and shoes, supplements, pet care, power tools.
Compressor parts for refrigeration, air conditioning and air compressor industries and spare parts .
Automation products, vegetables, fruits.
Marine & industrial automation solution, jowa odme, owts, ows, stp, ro, fwps, metritape and additional systems and its spare parts.Export
Bed Sheet, Electric Product..
Ost photonics, crystal material products such as scintillation crystal, encapsulated scintillator, pixellated array and scintillation detector for nuclear radiation detection, laser crystals, optics and components for laser system and applications, ir windows and oem optics for thermal imaging cameras and applications..Manufacturing and developing
MP3 Players Electric Switch Gears GPS Navigation System Baby High Chair USB Flash Drive, Pen drive DC, AC Inverters & Converters Electric Components .
Electric connectors converters & switches automobile gear boxes electric circuit breakers electric motors mdf boards electric tapes hand sanitizer electric chokes & ballast electric relays electric power meters electric switch gears motor scrap electric components paper boards electric fuses electric switches & isolators electric arresters electric resistors wires & cables solar inverters electric starters capacitors industrial filters pcb electronic meters touch screen/lcd monitors dc, ac inverters & converters medical thermometers electric contactors water meter personal protective equipment (ppe kits) electric transformers.
Chocolate Boxes Chocolates Electric Components Medicinal Herbs Herbs .