SLIDING DOOR Airtight Doors An airtight door is a door that is designed to prevent the passage of air through its edges, joints, or other openings. Airtight doors are commonly used in buildings to improve energy efficiency, reduce drafts, and prevent the infiltration of outdoor pollutants. They can also be used in laboratory or industrial settings to prevent the spread of hazardous materials or to maintain a controlled environment. Airtight doors may be made from a variety of materials, including wood, steel, or aluminum, and may be fitted with weatherstripping, gaskets, or other sealing devices to improve their airtightness. Features of Airtight Doors Airtight doors typically have several features that help to make them effective at preventing the passage of air: Weatherstripping: This is a seal that is applied around the edges of the door to prevent air from entering or exiting through the gaps between the door and the door frame. Gasketing: Gaskets are seals that are installed between the door and the frame to prevent air from passing through the joint. Tight-fitting door: Airtight doors are designed to fit tightly within their frames to prevent air from passing through gaps. Threshold: Airtight doors typically have a threshold that is designed to seal against the floor to prevent air from entering or exiting under the door. Self-closing mechanism: Airtight doors may have a self-closing mechanism that helps to ensure that the door is closed tightly and securely, further reducing the passage of air. Pressure relief vents: These vents allows the pressure inside the room to be equalized with the outside, avoiding any damage to the door or frame. Material: Airtight doors are commonly made from materials that are durable, long-lasting and can withstand the rigors of daily use, such as metal or metal-clad wood.
Brief Introductions: Type: 1A1 Bond: Vitrified Application: High-speed steel, Carbide alloy Specification: Customized Trade Terms: FOB Packages: Hard carton Delivery Time: 15 workdays by express CBN Grinding wheel production department mixed diamond and CBN abrasives in a certain ratio through a special process. Then mixed with the vitrified bond we developed, pressed, sintered, bonded, and finally made into a grinding wheel with two kinds of abrasives mixed. This grinding wheel can be used to process multiple materials at the same time, with excellent material removal rate and good life. This product belongs to our company's core high-end products. After long-term research and development experiments, it was finally successfully developed and received very good feedback from former customers. Model D (mm) T (mm) H (mm) X (mm) 1A1 25 12 6 6 50 12 6 6 100 12 12 10 300 25 12 10 400 25, 50 127 10, 25 500 25, 50 127 10, 25 600 25, 50 254 10,16,25 750 25, 50 304.8 50 914.4 25, 50 304.8 25, 50 1100 25, 50 304.8 50 Other specification can be made according to customer requirement CBN Grinding wheel Mixed and CBN Abrasive in a special proportion. Can be used in multiple materials and workpiece processing and machining. High cutting efficiency, good self-sharpening, less blocking, reducing the grinding burn occurs when the phenomenon of work Good flexibility will help to improve the surface roughness, mainly used for rough grinding, semi-fine grinding, polishing and other processes Compared to conventional grinding wheel, mixed diamond & CBN wheel has good material removal rates, longer wheel life and lower grinding costs Service: Detailed Specifications can be customized Provide after-sales service. Technical support on usage. Return and exchange of products for non-human reasons.
Mooring Buoy A Mooring Buoy system consists of multiple steel buoys. The exact configuration depends on water depth, field requirements and environmental conditions. Typically it is a pattern of four to eight mooring points used to moor tankers. Each point consists of a rigid buoy moored to the seabed by a chain and an anchor. The prime purpose of each buoy is to act as an anchoring point for the tanker to berth. The buoys are moored to the seabed, therefore, the tanker berths without use of its own anchors. Each buoy has a chain hawser assembly through the center of the buoy unit, terminating in a chain stopper on deck. The buoys are normally fitted with double quick release hooks to disconnect quickly from the tanker. Hawsers are connected to the bow or stern of the tanker on one end and to the quick release hook of the buoy on the other end. After mooring to the buoys, the tanker may start (off)loading by connecting a subsea hose string to the ships manifold. The other end of the hose string connects to the Pipe Line End Manifold (PLEM), fixed to the seabed or any other pipeline transferring the product to or from any installation located onshore or offshore. Should the tanker leave the berth, the hose string will be laid down on the seabed, to be picked up again when the next tanker arrives. Anchor arrangement - An anchor arrangement is deployed to connect the buoy to the seabed. For each buoy, dynamic behavior calculations predict the behavior of the buoy for various wind, wave and current conditions. These calculations determine the optimum anchor leg arrangement, and the size of the various anchor leg components.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions. Additional Information: Production Capacity: 100000 Pieces per month Delivery Time: Depends upon order volume Packaging Details: Sea worthy export packaging : Wooden Pallet > Paper Box > Plastic Bag
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
Product Information: The warp direction is all made of 12K carbon fiber filaments, and the weft direction is woven with hot-melt wires. The strength of the cloth is concentrated in one direction. It is mainly used for repairing and sealing cracks in buildings, increasing load and reinforcement, and resisting acid and alkali corrosion. For example: Concrete beams are flexurally strengthened, seismically strengthened. Reinforcement of civil buildings such as buildings, schools, hospitals, factories and other industries. Dams, roads, bridges and other infrastructure reinforcement. Reinforcement and anti-corrosion of large chimneys, mines, etc., lining of pipes, etc. Product Specifications 12K-UD200: 1Level, 200g/m2, 0.111mm Thickness, 100-3200mm Width; 12K-UD200: 2Level, 200g/m2, 0.111mm Thickness, 100-3200mm Width; 12K-UD300: 1Level, 300g/m2, 0.167mm Thickness, 100-3200mm Width; 12K-UD300: 2Level, 300g/m2, 0.167mm Thickness, 100-3200mm Width; Product Features 1. Soft texture, can be effectively pasted on uneven surfaces, suitable for various shapes and structures. 2. There is no need for large-scale construction equipment and on-site fixed facilities. The product can be cut at will, and the construction is simple and the cycle is short. 3. It is resistant to acid and alkali corrosion and can be used in various harsh environments. 4. Light weight, thin cloth surface, does not affect the appearance and shape of the structure. 5. Excellent physical properties, the tensile strength far exceeds that of ordinary steel. 6. Environmentally friendly and pollution-free. Applications It is mainly used for repairing and sealing cracks in buildings, increasing load and reinforcement, and resisting acid and alkali corrosion. Packaging Information Carton and Tray
New City Creative offers the widest range of indoor and outdoor commercial planters. From traditional to rustic to modern and everything in between. Materials include metal, galvanized steel, GRC and more. Our planters are used in hotels, shopping centers, education, healthcare, parks, commercial buildings, health clubs, spas, offices and more. New City Creative understands the importance of finding planters that are both durable and aesthetically pleasing. Our company's planters are all made in China and our team will work with you to ensure that our product recommendations meet your operational, aesthetic and financial goals. Commercial Planters FAQs Q: What types of plants can be grown in commercial planters A: A wide variety of plants can be grown in commercial planters, including trees, shrubs, flowers, and herbs. The type of plant that can be grown in a planter depends on the size and depth of the planter. Q: Are commercial planters easy to maintain A: Commercial planters are generally easy to maintain. However, the maintenance required depends on the type of plant and planter material. Some planters require more frequent watering, while others may require occasional cleaning or repainting. Q: Can commercial planters be customized A: Yes, New City Creative offers customization options, including size, color, and shape, and also offers branding options, such as logos or company names. If you're looking for quality furniture for your business, then the expert team at New City Creative is the right choice for you, so call us today
Airtight Doors An airtight door is a door that is designed to prevent the passage of air through its edges, joints, or other openings. Airtight doors are commonly used in buildings to improve energy efficiency, reduce drafts, and prevent the infiltration of outdoor pollutants. They can also be used in laboratory or industrial settings to prevent the spread of hazardous materials or to maintain a controlled environment. Airtight doors may be made from a variety of materials, including wood, steel, or aluminum, and may be fitted with weatherstripping, gaskets, or other sealing devices to improve their airtightness. Features of Airtight Doors Airtight doors typically have several features that help to make them effective at preventing the passage of air: Weatherstripping: This is a seal that is applied around the edges of the door to prevent air from entering or exiting through the gaps between the door and the door frame. Gasketing: Gaskets are seals that are installed between the door and the frame to prevent air from passing through the joint. Tight-fitting door: Airtight doors are designed to fit tightly within their frames to prevent air from passing through gaps. Threshold: Airtight doors typically have a threshold that is designed to seal against the floor to prevent air from entering or exiting under the door. Self-closing mechanism: Airtight doors may have a self-closing mechanism that helps to ensure that the door is closed tightly and securely, further reducing the passage of air. Pressure relief vents: These vents allows the pressure inside the room to be equalized with the outside, avoiding any damage to the door or frame. Material: Airtight doors are commonly made from materials that are durable, long-lasting and can withstand the rigors of daily use, such as metal or metal-clad wood.
Item no size WLL/T Technical parameter/mm Weight/kg B K L A G D H T J W I DS089Y-007 0.75 0.75 34 107 133 15 6 10 22 12 10.5 35 13 0.5 DS089Y-015 1.5 1.5 40 119 159 18 8 13 26 15 13.5 46 20 0.9 DS089Y-030 3 3 53 160 210 23 10 19 32 20 20 57 25 2.2 DS089Y-050 5 5 67 203 267 32 14 22 37 26 33 69 32 4.4 DS089Y-085 8.5 8.5 78 250 326 40 14 30 54 32 37 92 38 7.4 DS089Y-100 10 10 106 310 410 42 25 38 54 42 44 104 50 18.0 DS089Y-150 15 15 119 320 440 48 25 38 57 49 54 117 60 21.2 DS089Y-250 25 25 137 405 540 62 30 50 70 60 66 140 70 40.0 DS089Y-350 35 35 154 415 550 62 30 50 70 60 66 140 70 46.7 DS089Y-600 60 60 270 670 890 100 75 80 120 75 80 230 110 302 Forged super alloy steel-Quenched Tempered. Swivels are design with a safety factory of 4:1 Swivel are individually tested to 2 times the sea working load with certification. Swivel are zine plated for corrosion resistance and longer life. Swivels are manufactured with grease fitting for superior performance.
