Product Code: MED D12 Matt finished Light weight aluminum chest piece. Sensitive Diaphragm, Brass chrome plated screw on ring. Extra glow finish joint less Y tube Soft Sealing Ear knobs. Anatomically correct headset and comfortably angled. High Acoustic Sensitivity.
Product Code: MED D12 Matt finished Light weight aluminum chest piece. Sensitive Diaphragm, Brass chrome plated screw on ring. Extra glow finish joint less Y tube Soft Sealing Ear knobs. Anatomically correct headset and comfortably angled. High Acoustic Sensitivity.
Matt finished Light weight aluminum chest piece. Sensitive Diaphragm, Brass chrome plated screw on ring. Extra glow finish joint less Y tube Soft Sealing Ear knobs. Anatomically correct headset and comfortably angled. High Acoustic Sensitivity
Features: Light Weight aluminium sand anodized chest piece High Acoustic Sensitivity PVC U shaped Tube available in all colours Soft sealing ear knobs with Metal bush Chrome plated headset and Comfortably angled Chrome plated Metal ring
Product Code: MED D15 Features: Solid Stainless Steel Dual Head Chest Piece Cardiology/ General/ Paediatric High Acoustic Sensitivity & Sound Conduction Sensitive Floating Diaphagrams for Adult & Paediatric Extra Soft Stealing Earknobs Two-Way Tube with extra Gloss Finish Anatomically Accurate 6mm Headset and Comfortably angled
Dual Head Pediatric Stethoscope Product Code: MED D13 Description Features: Light Weight aluminium sand anodized chest piece High Acoustic Sensitivity PVC U shaped Tube available in all colours Soft sealing ear knobs with Metal bush Chrome-plated headset and Comfortably angled Chrome plated Metal ring
1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.
NT Gum Acacia Crystal, Packaging Type: Standard Price - Rs 180/ Kg Product Specification Packaging Type : Standard Brand : NT Country of Origin : Made in India Product Description Gum Acacia, popularly known as babul, is a large tree, up to 14 meters high, with thorns on its branches. It has darkish grey bark and yellow flowers in spherical heads. Babul tree is indigenous to Sind in Pakistan. It occurs wild in India and tropical Africa. It is planted for its bark. The tree yields a gum, known as babul gum. The bark of babul tree contains tannin and gallic acid. The leaves and fruits of the tree also contain tannin and gallic acid. Healing Power and Curative Properties The leaves, the bark, the pods and the gum of the tree have medicinal virtues. The leaves and the bark are useful in arresting secretion or bleeding. The pods help remove catarrhal matter and phlegm from the bronchial tubes. The gum allays any irritation of the skin and soothes the inflamed membranes of the pharynx, alimentary canal and genito-urinary organs. Keyword : Natural Gum,Gum Acacia,Babul Wood,Babul Bark,Babul Seed,Medicinal Gums,Organic Gums Additional Information Item Code : HO9 Delivery Time : 3-5 days Port Of Dispatch : jhansi Packaging Details : As per Client Requirement
SEA CAUGHTÂ SQUID LOLIGO SPP Products Form Style Size Grades Packing SQUID WHOLE SQW RAW BLOCK U3 36 610 1020 2040 4060 100UP pieces per kg 10 x 2Kg Block 20 x 1Kg Block 12 x 1Kg Tray 1 x 12Kg IQF 12 x 1Kg IQF SQUID WHOLE CLEANED SQW C RAW BLOCK IQF U5 610 1020 2040 4060 6080 80100 100UP pieces per kg 10 x 2Kg Block 20 x 1Kg Block 12 x 1Kg Tray 1 x 12Kg IQF 6 x 2Kg IQF 3 x 4Kg IQF 4 x 3Kg IQF SQUID TUBES RAW BLOCK IQF 1020 2040 4060 6080 80UP pieces per kg 10 x 2Kg Block 12 x 1Kg IQF 1 x 12Kg IQF 12 x 1Kg Tray 24 x 05Kg Tray 20 x 045Kg Tray SQUID TENTACLES RAW BLOCK IQF 60UP or as per order 10 x 2Kg Block 10 x 1Kg IQF 1 x 10Kg IQF BLANCHED COOKED IQF SQUID RINGS BLANCHED COOKED BLOCK IQF As per order 10 x 2Kg Block 10 x 1Kg IQF 1 x 10Kg IQF SQUID RINGS amp TENTACLES BLANCHED COOKED SEMI IQF TRAY PACK As per order 12 x 1Kg Tray 24 x 05Kg Tray SQUID TUBE amp TENTACLE RAW SEMI IQF TRAY PACK As per order 12 x 1Kg Tray 24 x 05Kg Tray SQUID STRIPS RAW BLANCHED COOKED BLOCK IQF As per order 10 X 2Kg Block 10 x 1Kg Tray 24 x 05Kg Tray STUFFED SQUID RAW IQF As per order 1 X 10Kg IQF 10 X 1Kg IQF
Haynes 718 alloy is a precipitation-hardening nickel-chromium alloy that offers high strength, toughness, and resistance to corrosion and high-temperature environments. It was developed in the 1950s for use in gas turbine engine components, and has since found a wide range of applications in other high-stress industries such as aerospace, nuclear, and chemical processing. The alloy is characterized by its excellent mechanical properties, including high tensile and yield strength, good ductility and toughness, and resistance to fatigue, creep, and stress-corrosion cracking. These properties are achieved through a combination of precipitation hardening and solid-solution strengthening, which involve heat treatment processes that cause the formation of fine, uniform precipitates within the metal matrix. Haynes 718 alloy also has good resistance to oxidation and other forms of corrosion, particularly in high-temperature environments. It is capable of maintaining its properties at temperatures up to around 1300�°F (700�°C), making it suitable for use in hot sections of gas turbine engines, nuclear reactor components, and other high-temperature applications. In addition to its mechanical and corrosion resistance properties, Haynes 718 alloy also has good weldability and machinability. It can be readily welded using a range of methods, and can be easily machined using standard metalworking techniques. Overall, Haynes 718 alloy is a versatile and reliable material that has proven itself in a wide range of demanding applications. Its combination of high strength, toughness, and resistance to corrosion and high-temperature environments make it an ideal choice for use in critical components where reliability and performance are paramount. Haynes 718 alloy standards vary by country. Here are some of the common ones: United States Standards: AMS 5596: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, Haynes 718 AMS 5662: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 AMS 5663: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5664: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5832: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718 AMS 5962: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, Haynes 718 AMS 5838: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718SPF We can provide the following the prodcuts:Haynes 718 alloy coil; Haynes 718 alloy strip;Haynes 718 alloy plate; Haynes 718 alloy sheets; Haynes 718 alloy tube; Haynes 718 alloy pipe;Haynes 718 alloy flat; Haynes 718 alloy bar GB/JIS:NW7718/UNS:NW7718/W.Nr:2.4668
We are one of the most trusted manufacturer and supplier of copper fittings and flanges in India. We offer wide range of copper fittings comprises of copper flanges, copper pipe fittings, copper tube fittings and copper forged fittings which provide an economic and efficient method of changing directions in a wide spectrum of domestic and commercial applications ranging from air conditioning, refrigeration, heating, fluid distribution, air pressure lines and plumbing etc. Our fittings have no rough surfaces, present a neat appearance, heat more rapidly, and provide better flexibility to the installer to install and join the copper tube at appropriate place. Grade: â?¢ ASTM / ASME SB 61 UNS NO. C 92200 â?¢ ASTM / ASME SB 62 UNS NO. C 83600 â?¢ ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 (cu-ni-90/10), C 71500 (cu-ni-70/30), â?¢ ASTM / ASME SB 152 UNS NO. C 10100, C 10200, C 10300, C 10800, C 12000 & C 12200. Specifications: Fittings: (butt weld, socketweld & threaded) 45 deg elbow, 45 deg long bend, 90 deg elbow, 90 deg long bend, 180 deg u bend, concentric reducer, eccentric reducer, equal tee, unequal tee, end cap / pipe cap, union, nipple, swage nipple, full & half coupling, cross, plug, bush, etc.Flanges: Slip-On (SORF), Blind (BLRF), Socket weld (SWRF), Weldneck (WNRF), Screwed (SERF), Lapped Joint (LJFF), Weldneck Ring Joint (WNRTJ), Long Weld Neck, Orifice, Spectacle Blind, Ring Joint, Threaded, etc. Fittings: 15 mm NB to 600 NB in schedule 5, 10, 20, 30, 40, 80, etc Flanges: 15 mm NB to 600 mm NB in 150#, 300#, 600#, 900, 1200#, Table D, Table E, Table F, Table G Test Certificate: MTC, TC from government approved Laboratory under Third Party Inspection.
We have an edge in presenting Convergence Purity Magnet. It is basically a magnetic beam-adjusting device for use in the region of the neck of an in-line type color picture tube and is composed of three pairs of plastic magnet rings. Virtually each pair comprises 2-pole, 4-pole and 6-pole plastic magnet rings. The tool comprises a magnetic field distribution suited to a silky adjustment of the electron beam, as a result permitting centralization and rotation of electron beam in the order of the color picture tube. Neck Dia: 29 mm Size Available: For 14", 20", 21", 29" tubes
Organic/wild Red Swamp crawfish 15/20 ct.
Organic/wild Red Swamp crawfish 15/20 ct.
Borosilicate glass tube, rod, colored tube, color rod, pharmaceutical neytral glass tubing, ampoules, tubular glass vial, moled glass vial, rubber stopper, float glass, lead glass tube.
Model: Inflatable River Raft (YHR-2) Length: 14' Width: 7' Weight: 126 lbs. Frame Width: 66" Max Frame Length: 82" Tube Diameter: 20" Thwart Diameter: 13.5" Center Compartment: 45"W x 52"L KickRocker (BowStern): 29" Number of Air Chambers: 6 Number of D-Rings: 12 Number of Handles: 4. 140x68x50cm.
Product Description 1.Working pressure: up to 9000 psi 2.Working temperature:-20 to 200 Celsius Degree 3.Size: 1/8" to 1 1/2" (Fractional Tube) or 2 to 38 mm (Metric Tube) 4.Diverse materials and configurations are available. 5.Precision machined components ensure perfect deformation of the ferrules and tubing. 6.Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads. 7.Radius junction design with elbows provides smooth flow path. 8.Every fitting is stamped with size, material, and heat code 9.Fittings are easy to disconnect and retighten.
Model:Expedition E-140 River Raft YHR-3 Length: 14' Width: 7' Weight: 148 lbs. Frame Width: 66" Max Frame Length: 82 Tube Diameter: 20" Thwart Diameter: 13.5" Center Compartment: 45"W x 54"L Kick\Rocker (Bow\Stern): 29" Number of Air Chambers: 7 Number of D-Rings: 14 Number of Handles: 6. 138x68x40cm.
Frozen Squid Ring (Gigas/Todarodes/ Illex Squid) Frozen squid Tube (Todarodes Pacificus) , 30% glazing,IQF,size before glazing,cleaned, peeled, raw, tip on, wings off,1 kg/ plain bag with head card 10bags/cartons 24 tons/Container Frozen squid Ring (Todarodes Pacificus), 70% nw, IQF, 1 kg/ plain bag with head card ,10bags/cartons 16 tons/Container Frozen squid tube(Dosidicus Gigas ) 70% nw, IQF,3-5pc/kg,1 kg/ bag with plain bag with head card ,10bags/cartons, 24 tons/Container Frozen squid Ring(Dosidicus Gigas )70% nw, IQF,3-10cm, 1 kg/ plain bag with head card,10bags/cartons 16 tons/Container
Packing list: A gasoline duplicating cutting torch·+ An explosion suppression gasoline tank(no duplicating machine, the userf+s original acetylene duplicating machine can still be used); 10 meters oil-resistant rubber hose·+longer hose optional·¼; 4 cutting nozzles: QZ30-1#- can cut steel sheet 3~10mm thickness·+optional·¼ QZ30-2#- can cut steel sheet 10~20mm thickness·+optional·¼ QZ30-3#- can cut steel sheet 20~30mm thickness·+optional·¼ QZ100-1#- can cut steel sheet 20~40mm thickness·+optional·¼ QZ100-2#- can cut steel sheet 40~60mm thickness·+optional·¼ QZ100-3#- can cut steel sheet 60~100mm thickness·+optional·¼ QZ300-1#- can cut steel sheet 100~150mm thickness QZ300-2#- can cut steel sheet 150~200mm thickness QZ300-3#- can cut steel sheet 200~250mm thickness QZ300-4#- can cut steel sheet 250~300mm thickness A set tip drills; A set o-ring·+spare parts·¼; Instruction; A set certification. Mark: CNC flame cutting machine combustion system reform Existing acetylene or propane CNC cutting machine can be to carry out technological transformation; combustion material feeding system will be changed to gasoline supply system, become gasoline CNC Cutting Machine. Performance Overview Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting: =+ Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using. =ª Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside. =ª Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures. =+ It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting. =+ As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.). =- The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness. =- The combustion tube is not backfire. =ª Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished. =- Itf+s normal working temperature range is -40 f¦ to 50 f¦. =+ A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate. Weight: 10kg/package Dimensions: length 610mm, width 380mm, high 350mm.
