Standard: GB/T 2965-2007, GB/T 13810-2007, ASTMB348/ASME SB348, ASTMF67, ASTMF136, ISO-5832-2(3), AMS4928, MIL-T-9047,JIS.etc Grade: TAL- TA4,TA8-TA10, TA15-TA18, GR1-GR5, GR7, GR9, GR11, GR12, TL-6AL-4V,TL-6AL-4V ELI Diameter: 1.0-300mm Length : 1000mm- 12000mm Technique: Hot Forging& cold rolling Surface: Bright Application : Metallurgy, electronics, Medical , chemical petroleum, pharmaceutical, aerospace, etc
Type: forged/rolled Sharp: round and square Gr.1,Gr.2,Gr.3,Gr.4,Gr.5,Gr.7,Gr.9(Ti-3Al-2.5V), -Delivery Time: according to your products. -Terms: according to negotiation -Payment: according to negotiation -Package: accord with our export package. Rod-Diameter:8-15.5 Bar-Diameter: 20-200 Length: as customer's requirements(Up to 6100mm).
Titanium alloy refers to a variety of alloy metals made of titanium and other metals. Titanium is an important structural metal developed in the 1950s. Titanium alloy has high strength, good corrosion resistance and high heat resistance. From the 1950s to 1960s, it was mainly the development of high-temperature titanium alloys for aeroengines and structural titanium alloys for airframes. Hundreds of titanium alloys have been developed in the world, including 20 ~ 30 most famous alloys, such as Ti-6Al-4V, ti-5al-2.5sn, Ti-2Al-2.5Zr, ti-32mo, Ti Mo Ni, Ti PD, SP-700, ti-6242, ti-10-5-3, Ti-1023, BT9, BT20, imi829, imi834, etc Titanium is an isomer with a melting point of 1668 â?? and a close packed hexagonal lattice structure below 882 â?? �± Titanium; It has a body centered cubic lattice structure above 882 Titanium. Based on the different characteristics of the above two structures of titanium, appropriate alloy elements are added to gradually change the phase transformation temperature and phase content to obtain titanium alloys with different structures. At room temperature, titanium alloys have three kinds of matrix structures, and titanium alloys are divided into the following three categories: ± Alloy ±) Alloy and Alloy.
Advantage of Titanium High Strength Titanium strength ratio is better than other metals, components with high strength, good rigity, less weight can be made out of titanium. Corrosion Ressistance Compared with stainless steel, titanium alloys corrosion is better in moisture laden air, titanium greatly resists spot corrosion, acis corrosion and stress corrosion High-Temperature Ressistance Titanium can work in 450-500 for a long time, titanium alloy still prossesses high strength when working in 150-500 Good Thermal Conductivity Titanium is non-magnetic metal, it can not be magbetized in large magnetic field, also titanium is toxic-free and compatibility with blood, there titanium is allpied in medical field Details about Titanium Gr 2 billet Standard ASTM B348, AST M F67/136 Material Gr 2 Diameter 0.05 ~ 400 mm Length 50 ~ 6000 mm or as clients requirement Feature 1. Low density and high strength 2. Excellent corrosion resistance 3. Good reisitance to effect of heat 4. Excellent Bearing to cryogenic property 5. Nonmagnetic and Non-toxic 6. Good thermal properties 7. Low modulus of elasticity
Titanium forging square bar -gr1~gr23 -round bar / square bar/hex bar Name Titanium bar Class Round bar / square bar/hex bar Standard Astm b348, astmf 67, astmf136, ams4928, astmb381 Mil-t-9047g, astmf1295 Grade Gr1~gr23 Size: Dia: 6mm~350mm Length:
Quick details Application: Industrial Thickness: 0.02-0.5mm Width: 15-600mm Length: =500mm Grade: Gr1, gr2, gr3, gr4, gr5, zirconium, molybdenum, nickel , tantalum, pure titanium. Titanium alloy Ti (min): 99% Place of origin: Shaanxi, china (mainland) Brand name: Xw Model number: Xw-3022 Surface: Bright and smooth Shape: In coil, strip Astm: B265
Titanium Threaded Rod/Bar Threaded titanium rods are also called titanium threaded bars, which are made by thread rolling or machining titanium rods directly. Threaded titanium rods have the characteristics of low density, high specific strength, good corrosion resistance, low thermal conductivity, non-toxic and non magnetic properties. Titanium threaded bars and rods are widely used in various industries such as electroplating, electrolysis, chemical engineering, medical equipment, aquaculture, electronic hardware, plastics, etc. If you want to customize titanium threaded bar or want to know the threaded titanium rod price, please do not hesitate to contact the Changsheng titanium alloy bar supplier.
Place of origin: shaanxi china (mainland) Brand name: goodtrust Model number: gtm-0920 Application: industrial Technique: rolled Grade: titanium Weight: random Purity: 99.6% Surface: polished Diameter: >3.0mm Shape: round Length: customized
Place of origin: shaanxi china (mainland) Brand name: goodtrust Model number:gtm-00190 Application: industrial Diameter: 8-150mm Shape: round Length: less than 3000mm Standard: astm;gb;gjb;ams, ect Technical: rolling Technique: rolled Grade: cp titanium Weight: 4.5g/cm3
Product Name: Titanium bars Grade: GR5, GR1 GR2, Gr9, Gr12, etc. Standard:ASTM B348, ASTM F67, ASTM F136 Size :Dia6.0-400mm Length: 5-6000 mm (customer tbd) Application: Industry / Medical Color: Ti Natural Technique: Forged, Rolled Density: 4.51g/cm ³ Surface:Polished/Pickling
Baoji Create Metal Co., Ltd We mainly manufacture titanium & its alloy products for industry, medical, & aerospace, nickel & its alloy products, and zirconium & its alloy products. Titanium, Nickel, Zirconium & it's alloy round bars/rods, sheets/plates, wires, tubes, forgings, standard parts and non-standard parts. Products manufacture range: Titanium bar: Product: Forged rods bars / Rolled rods bars Size Condition: Dia(30~400)xL
1. Material: gr2 2. Standard: astm f67, iso5832-2 3. Size(mm): dia 6mm* l 4. State: m 5. Surface condition: polishing 6. Delivery time: 7-25 days after the contract take effect 7. Supply ability: 10 ton/tons per month 8. Tolerance: h6 9. Application: medical use 10 tensile strength: >=400mpa 11.Yield strength:>=275mpa 12.Elongation: 20% 13.Other materials; gr3, gr4, gr5 Our company specializes in producing titanium bars and titanium plates for both medical and Industrial. We have made a great success in these two areas, especially in medical. We have the ultrasonic flaw detection and infra-red detection apparatus to test our products, and we are the only one have the infra-red detection apparatus to check the whole bar in china. Quality certifications: 1) iso9001—2000 quality certification 2) titanium license 3) medical titanium license 4) camdi member 5) sgs
Name: Titanium Bar/Rod Size: Dia6.0--400mm Ã? Lengthâ?¤6000mm Grade: Gr 1, Gr 2, Gr 3, Gr 4, Gr 5, Gr 7, Gr 9, Gr 12, Gr 23 etc. Standard: ASTM B348, ASTM F136, ASTM F67 etc. Type: Ti round bar, Ti square bar, Ti flat bar, Ti hexagonal bar Condition: R/M /Y MOQ: 1 KG Application: Industrial, chemical industry, military industry, medical industry etc.
Name: Titanium Bar/Rod Size: Dia6.0--400mm Ã? Lengthâ?¤6000mm Grade: Gr 1, Gr 2, Gr 3, Gr 4, Gr 5, Gr 7, Gr 9, Gr 12, Gr 23 etc. Standard: ASTM B348, ASTM F136, ASTM F67 etc. Type: Ti round bar, Ti square bar, Ti flat bar, Ti hexagonal bar Condition: R/M /Y MOQ: 1 KG Application: Industrial, chemical industry, military industry, medical industry etc.
titanium bars Grade GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR23 Email Specifications: (3.0--350) mm L, specifications can be selected, can also be customized according to the specifications provided by the customer zero cut, the implementation of standards, delivery on time! Standardï¼? astm b348, astm f136, astm f67, ams4928, iso5832-2, iso5832-3 titanium alloy rod applications: Titanium products include titanium wire, titanium rods, titanium plates, titanium tubes, titanium strips and titanium foils. Extensive evaluation of aerospace, sports, petrochemical and other industrial fields. Titanium parts manufactured by machining, casting and forging, including various bolts, bolts, bases, flanges, connectors, elbows, medical parts, widely used in coupes, bicycles, automotive, medical, aerospace and petrochemical Industrial applications.
Place of Origin:Shaanxi, China Model Number:TST396 Application:Industrial Shape:Round Length:2000 Technique:Forged Grade:GR1 GR2, GR1 GR2 density:4.51g/cm3 Material:Titanium Condition:forged Standard:ASTM B 348
Titanium Clad Plate Titanium Clad Bar
Baoji Titanium Wire Industry Co., Ltd, an ISO 9001 & AS 9100D approved company, we are specialized in titanium alloy wire, bar, forging parts with ASTM, AMS & AWS classification. Currently our products serve the clients in aerospace, medical, industrial fields etc. Grades: CP Titanium: Grade 1, 2, 3, 4, 7 (Ti 0.2Pd), 12 (Ti 0.3Mo0.8Ni) Titanium Alloys: Grade 5 (Ti 6Al4V), Grade 23 (Ti 6Al4V ELI), Grade 9 (Ti 3Al2.5V) Diameter: Wire: 0.8 - 4.0 mm Bar: 3.0 - 114.30 mm The feature of our titanium wire: - High surface quality - Stability of quality characteristics - Lower impurity content
We can supply Ti-6AL-4V Titanium Alloy Bar AMS 4928 UNS R56400 Designations: GR5 Ti-6Al-4V Size: (Rolled) DIA8mm TO DIA30mm*L Length=1000mm-4000mm (Forged) DIA30mm TO DIA400mm*L Length=1000mm-4000mm Condition: Annealing (M) with rescaled, ground, machined, rough turned. Specification: AMS 4928 QAC: 100% Ultrasonic Testing; Supply the third party Quality Testing (including chemical composition and mechanical properties) Packaging: in standard export wooden case with plastic paper Payment: 30% T/T in advance against PI, the balance should be paid before shipment. Application: Titanium alloy bars can be used in aerospace fields.
Place of Origin:Shaanxi, China Model Number:ASTM B348 Application:Industrial Shape:Round Length:MAX:12000mm Technique:Forged weight:Actual Weight Key Words:grade 5 titanium round bar with stock Product Name:grade 5 titanium round bar 1. For producing electric light source parts and electric vacuum components. 2. For producing heating elements and refractory parts in high temperature furnaces. 3. For producing medical laboratory equipment. 4. Used as electrodes in the field of rare earth industry. 5. Used in the manufacture of weapons. 6. Used to make decorations and etc.
