Shredded Scrap Isri 210 211 Suppliers and Manufacturers

Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No.

3-4 piece cut tiers, (Truck/Passenger tires) Available for shipment in containers.

Passenger tires in bale. Available for shipment in containers.

We are suppliers of BEST QUALITY Copper Wire ScrapAnd Looking for serious buyers in need of our products, contact with us for more details. Copper wire scrap refers to discarded or waste copper wires and cables that are no longer in use and are collected for recycling purposes. These scraps can come from various sources, including industrial processes, construction and demolition sites, electrical and electronic equipment, and more. Copper wire scrap is valuable for recycling because copper is a highly sought-after material due to its excellent electrical conductivity and other useful properties. Here are some key points about copper wire scrap: Collection: Copper wire scrap is collected from various sources where copper wires and cables are no longer needed. This can include old appliances, electronics, discarded wiring, and more. Sorting and Processing: Once collected, the copper wire scrap needs to be sorted and processed. This might involve removing any non-metallic attachments, such as insulation, plastic coatings, or other materials. The goal is to obtain a relatively pure copper material for recycling. Recycling: The sorted copper wire scrap is then typically processed through various recycling methods. One common approach is to chop or shred the scrap into smaller pieces, which are then melted down in furnaces to separate the copper from any remaining impurities or coatings. Refining: After melting, the recovered copper is further refined to ensure its purity. This can involve processes like electrolytic refining, similar to the process used to produce copper cathodes. The result is high-quality copper that can be used for various applications. Applications: The recycled copper obtained from copper wire scrap can be used to produce a wide range of copper-based products. These include new wires and cables, plumbing pipes, electrical components, and more. The recycled copper retains its excellent electrical and thermal conductivity properties, making it valuable for industries that require such characteristics.

Top Quality Compressor Scrap Used Electric Motor scrap AC Compressor Scrap Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Monthly Supply Capacity: 500 - 1500 metric tons, Type: Fridges, AC. Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers Quantity: Between 200~500MT per month Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL Detailed Specifications : Compressor Brands : Necchi, Danfoss, Aspera, Ireland, Embraco Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details : 220-240 v 50 or 60 hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box Send your message to this supplier Main Specification:

Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.97%. Monthly Supply Capacity: 500 - 1500 metric tons, Type: all kind of scrap. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Monthly Supply Capacity: 500 - 1500 metric tons, Type: all kind of scrap batteries, Fe Content: HMS Fe Content (%): 100%) Drained Battery Scrap: Black Packaging Detail: Pallet with shrink wrapping

Commodity: Heavy Melting Stee (Hms): 1 & 2 (Isri 201-204-205) 80:20. Origin: Spain. Port of Loading: Algeciras Port, Spain. Supplies: 1 Trial Shipment for 5,000 Mt (+/- 5%) and Up to 20,000 Mt (+/- 5%) Every 30 Days for a Maximum of 36 Consecutive Months. Packaging: the Contracted Merchandise Will Be Introduced Directly Into the Warehouses of the Vessel Chartered by the Seller for Maritime Transport to the Destination Indicated by the Buyer. Sale Price: the Sale Price Will Be Set According to the International Market, With an Interesting Discount. Price: Us$320.00 Per Mt, Cif Any Asian, Europe Port. Way to Pay: Through Dl/c Open by the Purchaser, Irrevocable, Non-transferable, Non-divisible and Payable Against Shipment Documents, Analytics by International Laboratory, Etc. Observations: We Can Sell Goods in Situation: Exw Pacorini, Fob or Cif. Hs Code's: 7204.49.00 & 7204.41.00 S/n Code: Specifications: 1 Isri Spec 201 (Hms1) Same as Isri 200 Except Pieces Must Be Smaller Than 36x18 in. 2 Isri Spec 204 (Hms2) Same as Isri 203 Except Pieces Must Be Smaller Than 36x18 in. 3 Isri Spec 205 (Hms2) Same as Isri 204 Except & May Contain Automotive Scrap Except for Thin Gauge Material.

Clean cast iron scrap such as columns, pipes, plates,and castings of a miscellaneous nature, including automobiles. Our company is a leading exporter of ferrous and nonferrous metals. We export industrial scrap metal and obsolete scrap metal and supplies the recycled metals to its customers, including integrated steel mills, foundries, secondary smelters, and metals brokers. In ferrous we mainly deal in HMS1 & 2 Material Specification Heavy Melting Scrap (HMS 1& 2) ,80% HMS 1 & 20 % HMS 2 confirming to ISRI 200-206 Steel scraps shall be totally free from any types of radiation, bombs, arms and ammunition, mines, shell, cartridges, sealed containers, gas cylinders, explosive shells or explosive materials in any form either used or otherwise as per the specification below. HMS 1 ISRI Code 200: heavy melting steel. Wrought iron and/or Steel scrap 1/4 inch or steel scrap inch and over in thickness. Individual pieces not over 60 x 24 inches HMS 1 ISRI Code 201: heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap HMS 1 ISRI Code 202: heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap HMS 2 ISRI Code 203: heavy melting steel. Wrought iron or Steel scrap, Black and Galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as no.1 heavy melting steel. HMS 2 ISRI Code 204: same as ISRI 203 but max size 36x18 inches. HMS 2 ISRI Code 205: same as ISRI 204 but free of sheet iron or thin-gauged material. HMS 2 ISRI Code 206: same as ISRI 204, but max size 60 x 18 inches

PRODUCT SPECIFICATIONS: Heavy melting steel (HMS) or heavy melting scrap is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. HMS is typically traded as a blend of 1 and 2, either a premium blend (80/20) or lower grade mixes (70/30) and (60/40). For example, HMS 1 and 2 (80/20) should consist of HMS 1 and 2 in the ratio of 80% (HMS 1) and 20% (HMS 2). Each grade guarantees a minimum piece thickness: at least 1/4 inch (6.3 mm) for HMS 1, and 1/8 in for HMS 2 HMS 1 and 2 specifications as defined by ISRI (North America's Institute of Scrap Recycling Industries): ISRI SPEC 200 (HMS 1) Wrought iron and/or steel scrap 1/4 inch and larger in thickness. All pieces must be smaller than 60.24 in. ISRI SPEC 201 (HMS 1) Same as ISRI 200 except pieces must be smaller than 36.18 in. ISRI SPEC 202 (HMS 1) Same as ISRI 200 except pieces must be smaller than 60.18 in. ISRI SPEC 203 (HMS 2) Wrought iron and/or steel scrap, black and galvanized, 1/8 inch and larger in thickness. ISRI SPEC 204 (HMS 2) Same as ISRI 203 except pieces must be smaller than 36.18 in. ISRI SPEC 205 (HMS 2) Same as ISRI 204 except it may contain automotive scrap, except for thin guage material. ISRI SPEC 206 (HMS 2) Same as ISRI 205 except pieces must be smaller than 60.18 in.

Product Name: Aluminum Ingots Specifications : Grade: A7 Primary Aluminum Ingot, Requires A Minimum Aluminum Content Between 99.70-99.85, Quality Requirements: A00/a7 Aluminum Ingot Composition Table A7 Aluminum =99.7% Iron =0.16% Silicon =0.15% Copper =0.01% Zinc =0.05% Titanium =0.02%; Packing Size Is: 1160*90*90mm Weight 25kg Place Of Origin Requirement: Russia

Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Chemical Composition: C:0.06 0.082% Mn:0.75 1.05% SI:0.13 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% C 0.06 0.082% Mn 0.75 1.05% SI 0.13 0.28% P Max 0.035% S Max 0.045% HMS 1 ISRI Code 200: heavy melting steel. Wrought iron and/or Steel scrap 1/4 inch or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches HMS 1 ISRI Code 201: heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap HMS 1 ISRI Code 202: heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap HMS 2 ISRI Code 203: heavy melting steel. Wrought iron or Steel scrap, Black and Galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as no.1 heavy melting steel. HMS 2 inches. HMS 2 ISRI Code 205: same as ISRI 204 but free of sheet iron or thin-gauged material.HMS 2 ISRI Code 206: same as ISRI 204, but max size 60 x 18 inches