Sulphuric acid 98% min, hydrochloric acid, white dextrin/ cationic , tarch/modified starch, castor oil & derivatives , turkey red oil (tro) , liquid glucose food grade, malt extract liquid and powder, sorbitol 70% noc bp/usp grade, pdcb ( para dichloror benzen), caustic soda flakes and prills fortified rosins, cationic dry strength resin for paper, alkyl ketene dimer wax emulsion, surface sizing agent for paper, yellow dextrin/white dextrin water treatment chemicals, benzalkonium chloride( bkc)80% & 50% biocide, aluminium sulphate ferric/non ferric, poly aluminium chloride calcium hypo chloride,phosphonates (atmp/dtpmpa), ferric chloride meko , paint driers, mining and drilling products,xanthates (sipx, pipx, pax, pibx, pex, ), alcium chloride prills 97 and powder.
Name:phosphorous acid Cas no: 13598-36-2 Spec: 98.5%, 99% Package: 25kg/bag The most important use of phosphorous acid (phosphonic acid) is the production of phosphites (phosphonates) which are used in water treatment. Phosphorous acid is also used for preparing phosphite salts, such as potassium phosphite. These salts, as well as aqueous solutions of pure phosphorous acid, are fungicides. Phosphites have shown effectiveness in controlling a variety of plant diseases, in particular, treatment using either trunk injection or foliar containing phosphorous acid salts is indicated in response to infections by phytophthora and pythium-type plant pathogens (both within class oomycetes, known as water molds), such as dieback/root rot and downy mildew.[7] anti-microbial products containing salts of phosphorous acid are marketed in australia as 'yates anti-rot'; and in the united states of america, for example, aluminum salts of the monoethyl ester of phosphorous acid (known generically as 'fosetyl-al') are sold under the trade name 'aliette'. Phosphorous acid and its salts, unlike phosphoric acid, are somewhat toxic and should be handled carefully
Cas no.:13598-36-2 Appearance: white solid deliquescent Density:1.651 kg/l Melting point:74? Boiling point::200? Chemical formula: h3po3 Industry and agriculture The most important use of phosphorous acid (phosphonic acid) is the production of phosphites (phosphonates) which are used in water treatment. Phosphorous acid is also used for preparing phosphite salts, such as potassium phosphite. These salts, as well as aqueous solutions of pure phosphorous acid, are fungicides. Phosphites have shown effectiveness in controlling a variety of plant diseases, in particular, treatment using either trunk injection or foliar containing phosphorous acid salts is indicated in response to infections by phytophthora and pythium-type plant pathogens (both within class oomycetes, known as water molds), such as dieback/root rot and downy mildew.[7] anti-microbial products containing salts of phosphorous acid are marketed in australia as 'yates anti-rot'; and in the united states of america, for example, aluminum salts of the monoethyl ester of phosphorous acid (known generically as 'fosetyl-al') are sold under the trade name 'aliette'. Phosphorous acid and its salts, unlike phosphoric acid, are somewhat toxic and should be handled carefully As a chemical reagent Phosphorous acid is used in chemical reactions as a reducing agent that is somewhat less vigorous than the related hypophosphorous acid -
Chemical Name: Calcium bis[monoethyl(3,5-di-tert-butyl-4-hydroxylbenzyl)phosphonate] CAS No.:65140-91-2 Molecular formula:C34H56O10P2Ca Molecular weight:695 Appearance:White powder Melting Point,degree:260min. Volatiles,%: 0.5max. Calcium,%:5.5-5.9 Chloride: 0.3max. Transmittance: 425nm% 85min. 500nm% 90min. ANTIOXIDNT HONOX-1425 has low volatility, high resistance to extraction and good compatibility with most substrates. It is a highly efficient and non discolouring stabilizer for organic substrates. It is particularly useful as a stabilizer and esterification catalyst in modified rosin resins and in PET and other thermoplastic polyesters. It is also effective for the stabilization of polyolefin (particularly polypropylene fiber), crosslinked elastomer and special adhesive, wax, oil etc. It shows good processing stability during polypropylene fiber production when combined with antioxidant 168.
Activated Alumina Aluminum Oxide Ammonium Phosphate Ascorbic Acid, Vitamin C Ammonium Sulfate Ammonium Acetate Ammonium Formate Ammonium benzoate Ammonium Adipate Ammonium Lactate Solution Ammonium Magnesium Chloride Barium Chloride Beta D-GlucoPentaacetate Boron Aspartate, Boron Citrate, Boron Gluconate, Boron Glycinate Cadmium Chloride Cadmium Sulfate Calcium Benzoate Calcium Malate Calcium Citrate Malate Calcium Orotate Calcium Peroxide Calcium Fumarate Calcium Borogluconate Calcium Pyrophosphate Calcium Saccharin Chromium Acetate Chromium Fluoride Chromium polynicotinate Choline Chloride Cobalt Gluconate Cobalt Oxide Copper Citrate Copper Glycinate Copper Succinate Ferric Orthophosphate Ferrous Ascorbate Ferrous Sulfide, Iron Sulphide Ferrous Bisglycinate Gluconic Acid Hydroxyethylidenediphosphonic acid, HEDP phosphonate Hydrogen Peroxide Hydrogenated Palm Oil Iodoform Inositol Magnesium Metal Magnesium Sulfate Magnesium Citrate Malate Magnesium Glycinate
1. Handles, dimensions, colors are optional 2.Strong load-bearing ability to support 25 kg per shelf 3. Raw material: high quality cold rolled steel, book shelf plate thickness is changeable , all thickness is provided, such as , 0.4mm , 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 , 1.2 , 1.3 1.4 mm, .... We could design and , amufacture as your requirement for thickness. 4. Steel book shelf appearance: modern design, it is look beautiful , and the design is reasonable , it's stabilization and firm enough. 5. Pre-degreasing, degreasing, acid washing, surface adjustment, phosphonation, washing by cold water and hot water treatments. 6. Round featheredge frame, elegant, fashionable and more useful space. 7. Its dimension is adjustable according to customers¡¯ requirement 8. Compartment - 1850mm high 9.Many specifications can be made up freely. 10. Best quality, optimal design, most competitive price, elegant appearance, high standard workmanship. Size: h1850*w900*d390mm Pv:0.236cbm G.W.: 55kg.
Properties: Through the introduction of phosphonic group into carboxylic group, copolymer of phosphono and carboxylic acid (pca) has good dispersion property for scale of calcium carbonate and calcium phosphate in circulating cool water system. It has good scale inhibition for barium sulfate, strontium sulfate and silica scale. Pca has advantages in wide range of water quality, chemical stability, strong chlorine tolerance, etc. Pca can be used as scale and corrosion inhibitor in circulating cool water system and oilfield refill water system. Specification: Items index Appearance colorless or light yellow liquid Solid content % 50.0 min Total phosphor (as po43-)% 0.5 min Density (20fª)g/cm3 1.20-1.30 Ph(1% water solution) 3.0-4.0 Usage: When used alone, the dosage of 5-20mg/l is preferred. It can also be used together with organophosphines, copolymer, zinc salt or bta. Package : Normally in 250kg net plastic drum, ibc drum can also be used as required.
Edtmps Ethylene diamine tetra (methylene phosphonic acid) sodium (edtmps, zf113) [cas no.] 1429-50-1 dequest: 2040 Molecular formula: c6h12o12n2p4na8 molecular weight: 612.13 Structural formula: Properties: This product is nitrogenous organic polyphosphonic acid, which is a part of cathodic corrosion inhibitor, its property is 3~5 times better than that of inorganic polyphosphate. It can be fully dissolved in water, innocuous and none pollution to environment, has good chemical stability and thermal resistance. It shows excellent scale inhibition property under temperature 200gs? it can dissociate into 8 positive-negative ions, thus can chelate with more than two metal ions to form more than two polymer reticulation complex, the complex can be quickly dissolved in water to destroy the normal crystallization of calcium scale. Edtmps shows better antiscale effects to calcium sulfate and barium sulfate. Specification: meet criterion of hg/t 3538-2003 Items Index Appearance Clear yellow to umber transparent viscous liquid Package and storage: 25kg in plastic barrel, or confirmed by clients. Storage for ten months in room shady and dry place.
Aluminum Diethyl Phosphinate is a halogen-free flame retardant based on organic phosphinates. The full name is Aluminum Diethyl Phosphinate.This flame retardant is a kind of white powder or masterbatch, an organic phosphonic acid salt. It is not hydrolyzed, not precipitated, has good self-extinguishing properties into carbon. Application It is suited as flame retardant for thermoplastics and thermosets. It has high phosphorus content, good thermal stability and excellent flame retardant efficiency. As a flame retardant, it can be used separately, also can be used together with other flame retardants. Both two different applications have good effects.
Lc 141 is single product treatment designed to prevent Scale deposits and corrosion to ferrous and non-ferrous Surfaces in hot water heating systems and chilled closed Loops. It passivates the surfaces and forms a barrier layer to Inhibit corrosion. It is a synergistic combination of Phosphonates, polymers and phosphate. Application Easily feed/injected directly into the system by means of a chemical by Pass feeder. Dosage Initial treatment is 1 gallon per 1, 000 gallons of water in the system. There After add lc 141 to maintain a level of 25-35 ppm (mg/l) of Orthophosphate. Handling & precaution It is highly alkaline and should be handled with care to prevent personal Injury. Protective clothing and eye protection should be provided and worn. In case of skin contact , immediately flush thoroughly with plenty of clean Water. In case of eye contact, flush with copious amounts of water for 15 Minutes and obtain immediate medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Carboxylate-Sulfonate-Nonion Tri-polymer XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. Vcycletech XT-3100 is a good scale inhibitor and dispersant for cool water treatment, it has good inhibition for dry or hydrated ferric oxide. XT-3100 is a all organic dispersant and scale inhibitor,XT - 3100 has good inhibition for dry iron oxide and hydrated ferric oxide.As a excellent anti-scaling agent, XT - 3100 can also be used as a stabilizer phosphate or phosphonic acid salt corrosion inhibitors  (Similiar to RohmHaas ACUMER 3100) Specification: items index Appearance Light amber liquid Solid content % 43.0-44.0 Density (20)g/cm3 1.15min pH(1% water solution) 2.1-2.8 Usage: Carboxylate-Sulfonate-Nonion Tri-polymer can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. When used alone, the dosage of 10-30mg/L is preferred. When used in other fields, the dosage should be determined by experiment. Package and Storage: 200L plastic drum,IBC(1000L),customers requirement. Storage for ten months in shady room and dry place. Safety Protection: Acidity, avoid contact with eye and skin, once contacted, flush with water.
Hydrolyzed polymaleic anhydride (hpma) Cas no.: 26099-09-2 Structural formula: Properties: Hpma is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330íµ. Hpma has obvious threshold effect under high temperature (350íµ) and high phú¿8.3ú¬level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300íµ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement. Specification: Items Index Appearance Clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Phú¿1úÑ solutionú¬ 2.0-3.0 Density ú¿20íµú¬g/cm3 1.18 min Usage: Hpma is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place. Safety protection: Acidity, avoid contact with eye and skin, once contacted, flush with water. 250kg net plastic drum
Cas 26099-09-2 dequest: p9000 Properties: Hpma(hydrolyzed polymaleic anhydride) is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330 centigrade. Hpma(hydrolyzed polymaleic anhydride) has obvious threshold effect under high temperature (350 centigrade) and high ph(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300 centigrade with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma(hydrolyzed polymaleic anhydride) is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma(hydrolyzed polymaleic anhydride) has good corrosion inhibition effect when used together with zinc salt. Hpma(hydrolyzed polymaleic anhydride) can also used as additives for cement. Appearance Clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Ph(1% solution) 2.0-3.0 Density (20 centigrade)g/cm3 1.18 min Usage: Hpma(hydrolyzed polymaleic anhydride) is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma(hydrolyzed polymaleic anhydride) has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place. Safety protection: Acidity, avoid contact with eye and skin, once contacted, flush with water.
No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330 centigrade. HPMA has obvious threshold effect under high temperature (350 centigrade) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300 centigrade with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Specification: Appearance: Clear to umber transparent liquid Solid content: 48.0% min Bromine value: 80.0 mg/g max Average molecular weight: 450 min pH(1% solution): 2.0-3.0 Usage: HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for one year in room shady and dry place.
Diethylene Triamine Penta (Methylene Phosphonic Acid) (DTPMPA) CAS No 15827-60-8 Dequest: 2060 Molecular Formula: C9H28O15N3P5 Molecular weight: 573.2 Structural Formula: Properties: DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: items index Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acid (as PO33-)% 3.0 max Chloride (as Cl-)% 12-17 Density (20íµ) g/cm3 1.35-1.45 pH (1% solution) 2.0 Fe ppm 35 max Usage: DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelementí»s carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.íí
Properties:HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330f¦. HPMA has obvious threshold effect under high temperature (350f¦) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300f¦ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Specification: items& index Appearance Clear to umber transparent liquid Solid content %: 48.0 min Bromine value mg/g: 80.0 max Average molecular weight: 450 min pH(1% solution): 2.0-3.0 Density (20f¦)g/cm3: 1.18 min Usage: HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Cas 26099-09-2 dequest p9000 Properties: Hydrolyzed polymaleic anhydride (hpma) is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330¬. Hpma has obvious threshold effect under high temperature (350¬) and high ph(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300¬ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement. Specification: Items index Appearance clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Ph(1% solution) 2.0-3.0 Density (20¬)g/cm3 1.18 min Usage: Hydrolyzed polymaleic anhydride (hpma) is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package : Normally in 250kg net plastic drum, ibc drum can also be used as required.
Amino Trimethylene Phosphonic Acid (ATMP) CAS No. 6419-19-8 Dequest: 2000 Molecular Formula: N(CH2PO3H2)3 MolecularWeight: 299.05. Properties and usage: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or pale yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95min Chloride (as Cl-)% 2.0(or1.0)max 1.0max pH ú¿1úÑ solutionú¬ 2.0max 2.0max Feú¼mg/L 20.0max 20.0max Density ú¿20íµú¬g/cm3 1.33min í¬ Colour APHA (Hazen) 40max . Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. Package and Storage: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water. ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
Product Name:Poly(carboxylic acid) Identification Molecular Formula:(C3H4O2.H3O2P.Na)x CAS Number:71050-62-9 Storage conditions:2-8�°C Odor: Slight odor Active content (as acid)% :40%;50% PH(1% solution) : 3.5-4.5 Density(20ºC) g/cm3 : 1.15 - 1.25 Appearance : Llight yellow transparent viscous liquid PCA, or Poly(carboxylic acid), is a key member of the family of organic phosphonates,widely used in water treatment applications. A scale and corrosion inhibitor for cooling circulation water units and boilers;Metal chelate agent and color fixing agent for print and textile; Complexing agent for electronplate and water scale cleaning agent for metals.
English name: 1 h - imidazole - 1 - acetic acid Don't name: 1 - imidazole acetic acid Molecular formula: C5H6N2O2 Molecular weight: 126.11 CAS no. : [22884-10-2) Appearance: Kind of white powder. Properties: This product is dissolved in water, insoluble in organic solvents. Melting point: 257.5 268.0 ¡æ (decomposition). Content: 99% or higher. Areas of application: It is mainly used for azole to phosphonic acid synthesis of drugs. Packing: Net weight: 25 kg/drum. 1.3-fluoroaniline CAS:372-19-0 2.1,2,3-Trifluorobenzene CAS:1489-53-8 3.1-Bromo-3,5-dichlorobenzene CAS:19752-55-7 4.1-Bromo-2,4-dichlorobenzene CAS:1193-72-2 5.1-Isopropylimidazole CAS:4532-96-1 6.1-prop-2-enylimidazole CAS:31410-01-2 7.1-Butylimidazole CAS:4316-42-1 8.1-Pentyl-1H-imidazole CAS:19768-54-8 9. imidazole-1-carbaldehyde CAS:3197-61-3 10.N-acetylimidazole CAS:2466-76-4 11.1-Benzylimidazole CAS:4238-71-5 12.1,2-Dimethylimidazole CAS:1739-84-0 13.1-Pivaloyl-1H-imidazole CAS:4195-19-1 14.1,1¡¯-Sulfonyldiimidazole CAS:7189-69-7 15.1,1¡¯-Thiocarbonyldiimidazole CAS:6160-65-2 16.2,4-Dimethylimidazole CAS:930-62-1 17.2-Isopropylimidazole CAS:36947-68-9 18.2-Buthylimidazole CAS:50790-93-7 19.2-imidazol-1-ylacetic acid CAS:22884-10-2 25kg