PT-PSE105GB-D is a single port midspan Injector with 4 Pair PoE up to 90 watts of power with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE to Type-C Solution Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables waterproof POE , PoE for Solar Application manufacturer Industrial PoE manufacturer: Creative Lianjie Network Technology Co., Ltd Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-D Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+), 1/2(-) Output Power Voltage: 50-57Vdc User Port Power: 90W Guaranteen Input DC Input Voltage:50-57Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size:144.5 X 95 X 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year
PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case. PoE Injector for information kiosks After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates. High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. PoE Injector for POS For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. We are PoE supplier PoE Injector for information kiosks Specifications Parameter Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-E Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48 Vdc DC Input Current: 8.0A
outdoor PoE Injector Designed for the PoE++ powered 95W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. high quality PoE Injector Enclosed in an IP20 high-impact metal case, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 100-240VAC with 6KV surge protection, 50 or 60 Hz and operates under -40 to +65. The effective distance limitation is 100 meters over Cat5e/Cat6 cables. PoE Injector manufacturer: Creative Lianjie Network Technology Co., Ltd indoor PoE Injector Specifications Parameter UL certification PoE Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Extend temperature from -40 to 65 Lighting Protection at PoE port Gigabit data rates IP20 high-impact metal enclosure AC power cord with optional US or EU plug or other standard plug Diagnostic LEDs Part Number PT-PSE109GBRO Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) and 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 95W Guaranteen Input AC Input Voltage:90 to 264Vac(100 to 240Vac Rated) AC Input Current: 2.0A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting:Wall-mounted IP Rated: IP20 Connectors: Shielded RJ-45*2 Size: 214 X 134 X 41mm Weight: 1070gï¼?2.36lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals cUL/UL, CE, CB, FCC, RCM, NOM
PT-POS401GR-OT is a 4-ports ourdoor use PoE switch with 2 Pair PoE,each port up to 30 watts of power at 55 VDC at 0.55 amp.Switch industrial poe has sealing gasket inside which passed extension, bearing, corrosion, aging test. 4 ports includ 1 LAN port and 3 PoE output ports with 6KV (10/700us) surge protection. outdoor poe switch suppots 10/100/1000-Mbps of data speed. It is compliant with IEEE802.3af/at standard equipments, such as wireless APs, network camera, VoIP phone, base stations, and other high power Ethernet terminals.It has detection chip inside, which will detect and classify PD before powering it. outdoor poe switch will not provide power until a standard-compliant PD is detected. poe switch supplier: Creative Lianjie Network Technology Co., Ltd Enclosed in an IP67 waterproof metal casing, designed for outdoor installation with installation kit PT-POT-MBK, no need to open the equipment. It operates with input voltage of 100-240Vdc, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). PoE Switch for network camera Specifications Parameter Description Key Features 1 LAN+3 PoE ports PoE Switch Wide temperature solutions Lighting Protection Part Number PT-POS401GR-OT Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*3,Earth Port*1 Regulatory Compliance IEEE802.3 af/at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc Output Current: 550mA (Per Port) User Port Power: 30W Guaranteen(Per Port) Input AC Input Voltage: 100 to 240 Vac AC Input Current: 2A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV
PT-POS401GRF-OT is a 4-ports ourdoor use PoE switch with 2 Pair PoE, each port up to 30 watts of power at 55 VDC at 0.55 amp. It has sealing gasket inside which passed extension, bearing, corrosion, aging test. 4 ports includ 1 SFP port and 3 PoE output ports with 6KV (10/700us) surge protection. PoE Switch for VoIP phone It suppots 10/100/1000-Mbps of data speed. It is compliant with IEEE802.3af/at standard equipments, such as wireless APs, network camera, VoIP phone, base stations, and other high power Ethernet terminals.It has detection chip inside, which will detect and classify PD before powering it. It will not provide power until a standard-compliant PD is detected. PoE Switch for base stations Enclosed in an IP67 waterproof metal casing, designed for outdoor installation with installation kit PT-POT-MBK, no need to open the equipment. It operates with input voltage of 100-240Vdc, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). switch industrial poe Specifications Parameter Description PoE Switch for network camera Key Features 1 SFP +3 PoE ports PoE Switch Wide temperature solutions Lighting Protection Part Number PT-POS401GRF-OT Ports condition SFP Port*1, AC Input Port*1, PoE Output Port*3,Earth Port*1 Regulatory Compliance IEEE802.3 af/at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc Output Current: 550mA (Per Port) User Port Power: 30W Guaranteen(Per Port) Input AC Input Voltage: 100 to 240 Vac AC Input Current: 2A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV Mechanical Characteristics Case: Metal Color: White Mounting: Wall- mounted/ Pole-mounted IP Rated: IP67 Connectors: Shielded RJ-45*3,SFP*1 Size: 176mmX 269mmX 65mm Weight: 1.8kgï¼?3.97lbï¼? Warranty 2 year
outdoor poe switch PT-POS401GR-OT-D is a 3 port outdoor Switch with 2 Pair PoE up to 30 watts of power at 55 VDC at 0.55 amp. PoE Switch for wireless APs Designed for the PoE+ powered 30W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at and remains compatible with any IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We can custom PoE Switch Enclosed in an IP67 fire retardant metal case, designed for indoor installation with Wall-mounted. outdoor poe switch operates with a wide input voltage of 44-57 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). outdoor poe switch Specifications Parameter Description Key Features Wall-mounted/Pole-mounted Part Number PT-POS401GR-OT-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*3 Regulatory Compliance IEEE802.3at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 30W (per port) Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: White Mounting: Wall-mounted/Pole-mounted IP Rated: IP67 Connectors: Shielded RJ-45*4 Size: 176mmX 269mmX 65mm Weight: 1800gï¼?3lb 15ozï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE/FCC
PT-POS301GWS-AD is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. Designed for the PoE++ powered 60w poe switch Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, 60w poe switch supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. outdoor poe switch Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. outdoor poe switch operates with a wide input voltage of 44-57 VDC or 100-240Vac 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) PoE Switch for network camera Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-POS301GWS-AD Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc AC Input Voltage: 100 to 240 Vac Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV
POE Injector For IP Cameras PT-PSE100GF PT-PSE100GF is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32A amp. Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PoE Injector for wireless APs PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter Description Key Features Part Number PT-PSE100GF Ports condition LAN Port*1,AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps PoE Injector Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power:15.4W Guaranteen Input Input Voltage: 100-240Vac Frequency: 50/60Hz Typ Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV Mechanical Characteristics Case: plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 134 X 56X 33mm Weight:170g(0.37lb) LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE, FCC
PT-PSE106GW is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. Household PoE Injector Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at compliant terminals. It supports 10/100/1000Mbps of data rates. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for camera Enclosed in an IP40 plastic case, designed for indoor use. It operates with input voltage of 100-240 Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). China Lighting Protection POE Specifications Parameter Description Key Features Part Number PT-PSE106GW Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af/at/bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6(+),1/2(-) Output Power Voltage: 55Vdc Output Power Current: 1100mA User Port Power: 60W Guaranteen Input AC Input Voltage: 100 to 240 Vac AC Input Current: 1.5A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 415gï¼?0.88lbï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @>30W â?¤60W Warranty 2 year Safety Approvals cUL / UL / CB / CE / FCC / PSE / SAA
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 36 to 72 Vdc DC Input Current: 2.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 380gï¼?13.4ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals CE/FCC
PT-PSE106GW-AR is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. PoE Injector supplier:Creative Lianjie Network Technology Co., Ltd Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. UL certification PoE operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter Description Key Features Wall-mounted PoE Injector Part Number PT-PSE106GW-AR Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input AC Input Voltage: 100-240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) AC Input Current:1.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 425gï¼?15.0ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals cUL/UL/FCC/CE/PSE/SAA/BIS
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year
PT-PSE105GWS-2D is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. PoE Switch for base stations Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Switch for Ethernet terminals Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. It operates with a wide input voltage of 44-57 VDC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) We also provide poe adapter, PoE Splitter for wireless APs PoE Switch for VoIP phone China Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-PSE105GWS-2D Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 104.2mmX 60mm Weight: 400gï¼?0.88lbï¼? LED Indicator PowerIndicator: Green PoE Load Indicator: Yellow SFP Indicator: Green Lan Indicator: Yellow Warranty 2 year Safety Approvals CE
PRODUCT INTRODUCTION: RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer. PRODUCT FEATURE: REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU. Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation. Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly. Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches ) Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed. Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
1. Overview 1G3F+WIFI+CATV series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application provides data service access. 1G3F+WIFI+CATV series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT. 1G3F+WIFI+CATV series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X 1G3F+WIFI+CATV series is designed by Realtek chipset 9603C.
WS-C3750G-24PS-E data sheet Manufacturer Part Number WS-C3750G-24PS-E Product Type Managed, Stackable 24 ports L3 Switch Form Factor Fixed, Rack Mountable 1U, Stackable/Clustering Switch Port density - Uplinks 24 x 10/100/1000 Ethernet Ports
All IT related products with best price
Mcc control cabinet Control cabinets according en 60-204/1, vde 0113 Cables 600/1000vac, in accordance with iec 60502 Circuit diagrams according to din 40719 Rated voltage 380/220vac tn-s Frequency 50hz + -0.5@ We shall design as your request, fabricate. According to the actual condition.
Control autoamtion equipment They are widly used in industrial fiedl to distribute power, or receive singal of other equipment and show the working data of othere equipment. At your request.Suit to export.
40G QSFP+ SR LR ER Transceiver Module XYT-QSFP-40G-SR4 XYT-QSFP-40G-LR4 Cisco XYT-QSFP-40GE-LR4 Compatible 40GBASE-LR4 QSFP+ 1310nm 10km LC DOM OTN OTU3, 40G Ethernet, Infiniband, FiberChannel, SATA/SAS3, MSA Compliant Cisco QSFP-40GE-LR4 is supported on a wide range of Cisco equipment. FS S5850-32S2Q Switch Cisco Nexus 2000 N2K-C2248PQ Cisco Nexus 9000 N9K-X9432C-S Cisco Nexus 9000 N9K-C9372TX-E Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-M6PQ Cisco Nexus 9000 N9K-X9432PQ Cisco Nexus 9000 N9K-C92160YC-X Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 9000 N9K-X9564TX (uplinks) Cisco Nexus 3000 N3K-C3016Q Cisco Nexus 9000 N9K-X9736PQ Cisco Nexus 9000 N9K-C9332PQ Cisco Nexus 9000 N9K-X9464PX Cisco Nexus 3000 N3K-C3064T FS S5850-48S6Q Switch Cisco Nexus 6000 N6K-C6004-M12Q Cisco Nexus 3000 N3K-3132Q Cisco Nexus 3000 N3K-3172PQ FS S5850-48S2Q4C Switch Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-X9636PQ Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 6000 N6004-96Q Cisco Nexus 9000 N9K-C9336PQ Cisco Nexus 3000 N3K-C3064PQ-10GE Cisco Nexus 3000 N3K-C3164Q Cisco Nexus 3000 N3K-C3064-32T Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 7000 N7K-F312FQ-25 Cisco A9K-MPA-2X40GE Cisco Nexus 9000 N9K-C93120TX Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 5000 N5K-C56128P Cisco Nexus 3000 N3K-3172TQ Cisco Nexus 9000 N9K-C9372TX Cisco Nexus 5000 N55-M4Q Cisco Nexus 9000 N9K-M6PQ-E
