Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder
Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
We are the manufacturer and the exporter of the 100% synthetic polyester fabrics , chiffon , satin, crepe , georgette , french ladona , crinkle fabric , abaya fabric, t/r fabrics, blended fabric, viscose, pp fabric , paper cotton and other industrial usage fabrics such as poplin, taffeta, synthetic raw silk, synthetic paper cotton, camouflage, rain coat. we have in house facilities of waterjet looms, processing/dyeing, sizing, twisting machines and digital sublimation transfer printing. .Manufacturer, exporter, trader
Best Seller Vietnam Natural Bamboo Winnowing Basket Tray The mat is knitted with natural bamboo to create a tight fit to hold products from the largest to the smallest to avoid leakage, the top of the mat is scraped with strong rattan fibers to create rigidity for the mother. The product is covered with a layer of natural organic paint that is safe for human health.
Best Seller Vietnam Natural Bamboo Winnowing Basket Tray The mat is knitted with natural bamboo to create a tight fit to hold products from the largest to the smallest to avoid leakage, the top of the mat is scraped with strong rattan fibers to create rigidity for the mother. The product is covered with a layer of natural organic paint that is safe for human health.
SPECIFICATIONS Use : Filling Material, Spinning, CONCRETE Material : Coconut fiber Fiber Length : 2m x 50m Place of Origin : Ben Tre Product name : Coir Net Use : hill slope, cliffs, river banks, grass growing Length : Customizable Length PAYMENT TERM : T/T 40% 60% Type : Raw Material Coconut Coir DELIVERY : Within 10~15 Days Size : 2m x 50m Raw Material : 100% from coconut fibers
Hello, We can supply petroleum products at following price and procedures: Export Grade: LOADING PORTS- ROTTERDAM/HOUSTON Origin: Kazakhstan Payments Term: MT103/23/ TT wire transfer Inspection by: SGS, INTERTEK OR SIMILAR JET FUEL A1 (AVIATION KEROSENE COLONIAL GRADE A1) Quantity: Minimum 1,000,000 BBL spots / Maximum 5,000,000 BBL per month FOB PRICE: Gross USD 90 NET PRICE: USD 86 (Commission: Seller 50 / buyer 50) EN590 (10 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) EN590 (50 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) APPROVED FOB DELIVERY PROCEDURE 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyers logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in sellers tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyers desired duration upon successful completion of the trial order. All intermediary is paid within 48 hours and seller and buyer consider and sign contract.
T shirts, hoodies, garments, textiles, nightsuits, crop tops, fabric, tracksuits, custom printing clothes, leather jackets, belts, shoes, bags, accessories, chair parts, chair wheels, arm rest, net back, fashion accessories, necklace, rings, earrings, crop tops, streetwear t-shirts, hoodies, sweaters, dog blanket, dog accessories, cargos, cargo pants, sweatshirt, polo t shirts, us polo, puff print, screen print, embroidery, etc.
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Specification: 2 x 20m (40m2/roll), diameter of fibre string: 3-5mm. SIZE: - 26 x 26 lines/ m2, single x single; double x single; double x double - 36 x 36 lines/ m2, single x single; double x single; double x double - 40 x 40 lines/ m2, single x single; double x single; double x double PACKING: Pressed into bales 05-07Rolls/Pack, 200 Packs/Container 40'
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality:LNG Price TTO;$260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Terms;MT103/TT/DLC/LC/ESCROW/BTC Below procedures are NOT NEGOTIABLE. TANK TO VESSEL TAKE-OVER STANDARD PROCEDURE 1. Buyer issues official ICPO with company registration, buyers passport data page and banking details. 2. Seller issues MOU to buyer and buyer signs and send back to seller 3. Upon receipt of the countersigned original MOU from the buyer, seller emails to buyer the below listed documents:- 1) Certificate of Product Origin 2) Product Passport (Quantity & Quality Dip Test Analysis Report) 3) Bill of Lading 4) Tanker Vessel Q88 5) Cargo Manifest 6) Payment invoice for Title Takeover, 7) Ullage Report. 4) Upon buyer receipt of the documents, within 48 hours buyer contact the vessel captain and verifies the shipping documents of the product onboard the tanker vessel and pays 5% of the cargo value for the title takeover which amount to the sum of $450,000.00 5) Upon seller receipt of the title takeover payment, Seller transfers the title to the potential buyers company's name and issues all documents to the buyer company's name and send via swift from sellers bank to buyers bank the full prove of product documents. 6) Buyer carries out the CIQ/SGS inspection and upon a successful inspection; buyer pays via TT MT103 for the full product to the seller and after commences vessel to vessel transfer of the product. 7) The inspection at the loading port still remains the Russ Standard GOST R Quality and Quantity Analysis Report while inspection at the discharge point will be performed by Societe General De Surveillance SGS or CIQ at the expense of the potential buyer
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality: LNG Price TTO $260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Payment Terms MT103/TT/DLC/LC/ESCROW/BTC Below profcedures are NOT NEGOCIABLE. CIF STANDARD TRADING PROCEDURE 1. Buyer issues ICPO with Company Profile and Buyer Passport Copy, Companys registration Copy. 2. Seller acknowledges ICPO and issue to Buyer a Letter of Acceptance and Guarantee. 3. Seller issue Draft Contract SPA to Buyer. Buyer review SPA open for any amendment, sign and return to Seller for approval. 3. Seller registers and legalizes the signed Sales and Purchase Agreement contract and provides the registered, legalized and notarized SPA including PPOP as listed below. A. Certificate of Origin. B. Commitment to Supply. C. certificate of conformity D. Statement of Availability of the product. E. Product Export license for Allocation Issued by Ministry F. Allocation invoice 5. buyer secures allocation from the refinery (securing allocation at buyers expense). 6. Upon buyer securing allocation, Seller issues and register the Full set of POP with the Ministry of Energy and Justice, and with the loading Port Authorities, and charter of vessel for product Shipment. 7. Seller send to Buyer the full set of POP documents, vessel documents including SGS report at Origin Country to Buyer (by Bank to Bank and by email). Loading commence according to shipment schedule for departure from origin port within the specified working days after Buyer final notification of POP verification and Confirmation. POP DOCUMENTS: a)Certificate of Incorporation b )Act of Transfer c) Commercial Invoice d) Company Tax Payers Certificate e) Fresh SGS Report at Loading Port f) Tank Receipt g) Vessel Q&Q and Quality Specification h) Bill of Lading i) Certificate of Non-Wooden Package j)Notice of Readiness (NOR) k) Estimated Time of Arrival (ETA) l) Authorization To Sale (ATS) m) Cargo Declaration / Conforming Warrant n) Charter Party Agreement (CPA) to transport the product to the Discharge Port o) Ullage Report p) Customs Declaration Certificate. q) Product Allocation Certificate r) Notarized NCNDA/IMFPA and Endorsed by Seller Bank 8. within 3 banking days of the Vessel arrival at Buyer destination port, upon Buyers Confirmation and satisfaction with product buyer makes payment via TT/MT103 to Seller against Shipping documents and Title transfer. 9. Product discharged into Buyers storage.
Chiki Net, the ultimate crunchy snack experience! Made from high-quality ingredients, Chiki Net offers a deliciously addictive taste and satisfying crunch in every bite. Each piece is carefully crafted to perfection, ensuring maximum flavor and enjoyment. Whether you're enjoying a movie night at home, packing snacks for a picnic, or simply craving a tasty treat, Chiki Net is the perfect choice. Grab a pack today and indulge in the irresistible crunch of Chiki Net.
Rigid-hull inflatable boat (RHIB) or rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. EAST RIB boat,Rigid Inflatable Boat Full� length: 480cm Full� width:� 188cm No of Chamber: 4 Tube� Dia: 48cm Hull� weight: 400kgs Max� person:� 8 persons Recommend� HP: 50HP Net weight: 210kg Packing size:  410*150*750 cm Materials:0.9mm or 1.2mm pvc materials Do not support transport by air.