High Density Oxidized Polyethylene Wax Suppliers and Manufacturers

Printing Parameters Squeege:70-75 SHORE Mesh:  120 190/inch Tension: 25 - 35 N/cm Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

High Density Fiberboard with Moisture Resistance (HDF HMR )

Beeswax is as old as the history of bees and their exploitation by man. Known from the most remote antiquity, it was used, among other In 181 A.D. Corsica paid Rome an annual tribute were found in Egyptian tombs and on shipwrecks. As wax has slow oxidation, it lasts for a long time, as long as it is not attacked by wax moths or exposed to high temperatures. A large part of the wax extracted from the hives returns back to them in the form of sheets of wax, so that the bees can make new combs. In ancient times, all wax was used to make candles, since there were no other substitutes for lighting homes. Other destinations for wax are very diverse, divided between industry, agriculture, etc. It is used in electronics, weapons, the textile industry, the glass industry, electroplating, the paper industry, etc. It is used in agriculture in preparations for grafting. In medicine, in various balms, ointments, suppositories, ointments, plasters. In cosmetics, in the composition of cleansing, astringent, beauty and shaving creams; of lipsticks. Products that contain beeswax soften the skin. White wax is normally used in nourishing, astringent, cleansing creams, and in face masks. It is an excellent base substance for most cosmetic products and is used to prepare a chewing lozenge whose qualities, among others, are to activate the secretion of saliva and gastric juice, destroy dental tartar and the deposition of nicotine in smokers

Applications 1. Mainly used in electroplating industry. 2. Used as a catalyst for preparing polyethylene by phillips process under medium pressure. 3. Used for the preparation of analytical reagent, strong oxidant and chromate. 4. Used as catalyst for synthesis of polyethylene. 5. Used in electroplating industry, medicine industry, printing industry, tanning leather and fabric mordant dyeing.

melting point : -5 C density : 0.919 Refractive index : 1.47-1.476 flash point : 255 C Storage conditions : 2-8C solubility : chloroform: 0.1 mg/mL, clear, very faintly yellow Sesame oil is extremely stable and a rich source of Vitamin A, B, and E. Also, it contains beneficial anti-oxidants. Our Sesame Oil easily subsides into the skin and improves blood circulation and immunity.

Molecular Formula : C6H12O6.H2O Molecular Weight : 198.17 Melting point : 146 Flash point : 224.6 Density : 1.56 Acidity (ml) : 1.2max De-Equivalent : 99.5%Min Oxide, % : 0.0025max Sulphate, % : 0.0025max Insoluble matter in alcohol : Clear Sulfite and soluble starch : Yellow Moisture, % : 9.1max Calcium, % : 0.005max Iron, % : 0.0005max Arsenic, % : 0.000025max Heavy metal,% : 0.00005 max Loss on drying,% : 7.5-9.5 Residue on Ignition % : 0.1max

Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.

Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.

Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.

Lakadong Variety of Turmeric is Grown in the Himalayan Hill Region of North-East INDIA 100% Natural & Chemical-Free, this premium Variety is superb in color (Orange-Yellow when Powdered), Rich in Flavor & Fragrance Curcumin is 5%-9% and very Good Anti-Oxidant and high Medicinal Content. Available in Sliced Dried Form. Powdered Form also available.

Molecular Formula: Na2O SiO3 Cas No.: 6834-92-0 Appearance : white, uniform, beaded. Characteristics: This product possesses high alkaline and defoul character, which is easy to soluble in water, good dispersibility and emulsifiability, not soluble in alcohol. Na2O - 28.0-30.0% SiO2 - 27.3-29.2% Whiteness - 80% Min Fe - 100ppm Max Bulk density - 0.80-0.97g/cc Particle Size(14-60mesh) - 90% Min

Quality wood pellets from oak, spruce , pine and beech woods Diameter: 6-8 mm Humidity: 17, 5 kJ / kg Ash content: 1100kg/m3 Moisture content

Quality wood pellets from oak, spruce , pine and beech woods Diameter: 6-8 mm Humidity: 17, 5 kJ / kg Ash content: 1100kg/m3 Moisture content

Quality wood pellets from oak, spruce , pine and beech woods Diameter: 6-8 mm Humidity: 17, 5 kJ / kg Ash content: 1100kg/m3 Moisture content

Quality wood pellets from oak, spruce , pine and beech woods Diameter: 6-8 mm Humidity: 17, 5 kJ / kg Ash content: 1100kg/m3 Moisture content

Quality wood pellets from oak, spruce , pine and beech woods Diameter: 6-8 mm Humidity: 17, 5 kJ / kg Ash content: 1100kg/m3 Moisture content

Quality wood pellets from oak, spruce , pine and beech woods Diameter: 6-8 mm Humidity: 17, 5 kJ / kg Ash content: 1100kg/m3 Moisture content

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.