Sesame, cashew nuts, coffee, cocoa, shea nuts, shea butter, soybeans, organic soybeans, crude soybean oil, organic soybean oil, refined soybean oil, soybean lecithin, soybean meal, gasoil en590 Diesel 10ppm, natural liquified gas.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
TERMS OF TRANSACTION: TRANSACTION PORT: FOB & CIF: PAYMENT TERM: MT103, T/T WIRE, SBLC, DLC, BITCOIN, USDT INSPECTION: ANY UNIVERSALLY ACCEPTED Q&Q INSPECTION COMPANY COMMISSION: TO BE SHARED 50% EACH BY BOTH SIDES Minimum Quantity: 10,000 metric tons Maximum Quantity: 300,000 metric tons CIF price: GROSS USD $460.00 MT NET: USD $ 450.00 MT
Minimum Quantity: 50,000 metric tons Maximum Quantity: 600,000 metric tons CIF price: GROSS USD $385.00 MT NET: USD $ 375.00 MT Terms Of Transaction: TRANSACTION TYPE: FOB & CIF LOADING PORT: RAS LAFFAN/HAMAD/ROTTERDAM/ HOUSTON/ FUJAIRAH PAYMENT TERM: MT103, T/T WIRE, SBLC, DLC, USDT ORIGIN: QATARI ORIGIN Inspection: Any Universally Accepted Q&q Inspection Company Commission: To Be Shared 50% Each By Both Sides
EN590 | 10ppm FOB Fujairah Port-UAE - (Vessel can be re-routed to other port by buyer request and seller confirm) Origin: Russian Quantity: 50,000 MT for first lift Price: 342$/ MT OR OMDG Plat-10$/ MT Schedule of vessel arrival: 7-10 business days
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
Jet fuel, jet a1, gasoil, d6, d2, en590 10 ppm, diesel, petcoke, sugar, sugar icumsa 45.
Gasoil, often referred to as diesel oil or simply diesel, is a middle distillate derived from the crude oil refining process. It possesses properties between those of lighter fuels like gasoline and heavier fuels like lubricating oil. Gasoil is used as both a fuel and a processing element in various industries. Primary Characteristics: Appearance: Clear to slightly hazy, ranging in color from light straw to amber. Odor: Characteristic petroleum smell. Density: Varies based on specific grade and blend but generally denser than gasoline. Cetane Number: Indicator of the combustion speed of diesel fuel and compression needed for ignition. Specifications: Gasoilâ??s quality and classification often adhere to standards set by organizations such as ASTM (American Society for Testing and Materials) or equivalent regional standards. Variations include Ultra-Low Sulfur Diesel (ULSD), Low Sulfur Diesel, and others. Applications: Automotive: Fuel for diesel-engine vehicles, such as trucks, buses, and cars. Industrial: Used in various industrial machines and engines, including generators. Marine: Fuel for certain types of marine vessels. Heating: Used in some regions as heating oil for homes and businesses. Power Generation: Fuel for diesel-powered electricity generators. Advantages: Energy Dense: Provides more energy per gallon compared to gasoline, leading to longer fuel economy in diesel engines. Efficient: Diesel engines often convert fuel to energy more efficiently than their gasoline counterparts. Reliable: Known for its durability and reliability in heavy-duty applications.
EN590 Diesel ( 10 ppm ) ULSD
Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate, intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat.Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat
CIF EN-590 10ppm Diesel -12 Month Contract Production Procedures: Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Product: EN590 Diesel 10ppm Origin: Kazakhstan - (Our own refinery) Delivery: CIF to any safe world port MOQ: 25mt Quantity & Fixed Pricing: 25mt= $640 50mt= $635 100mt=$630 Commission: $5 per MT starts with you. (sell side closed) CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellerâ??s approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps.