JD168 series are low range differential pressure transducers and transmitters with NEMA4 (IP-65) rated aluminum. They are very rugged and very reliable, good for many industrial applications. The patented stainless steel sensor provides good corrosion resistance, excellent performance and long-term stability. Our unique production setup can also make special pressure range (e. G. -0.5WC to +3.5WC) to meet special applications. Features: Up to 15 PSI overpressure on all ranges Wrong-wiring full protection Pressure range as low as 10pa only Application: Power plant air flowmonitor and controw Clean room and fime hood control Duct static pressure control Draft control HVAC and VAV control Furnance air flow control. Shocking-proof package.
Operating Voltage V: 4 ~ 6 Rated Voltage V: 5 Rated Current mA: Max. 80 Coil DC Resistance : 40 ± 5 Sound output ( at 10 cm ) dBA: Min. 90 Rated Frequency Hz: 2700 Operating Temperature º C: -20 ~ +70 Storage Temperature º C: -30 ~ +85 Terminal : SMD Housing Material / Color: LCP / Black Weight g: 0.9.
Sound output (at 10 cm) dBA: Min. 70 (3Vp-p, 4000Hz, Square Wave) Max. Input Voltage Vp-p: 25 Max. Current Consumption mA: 1.0 Capacitance ( at 120 Hz ) pF: 14000 pF ± 30 % Operating Temperature º C: -20 ~ +80 Storage Temperature º C: -30 ~ +85 Terminal : SMD Housing Material / Color : LCP/Black Weight g: 1.
We are the professional fish finder transducer manufacturer in China a)Cable:8-20m. b)Frequence:50KHz,200KHz,50/200KHz c)Power:300-1000w d)Material:Bronze e)Connector: Pin3-Pin10 f)Compatible:Furuno,Garmin,Raymarine,Navman,Hondex,Humminbird,Koden etc. 26*14*9cm.
Main characteristics: High efficiency: with high mechanical quality, it can achieve high transfer efficiency between electrical energy and acoustic energy when working at the point of resonance frequency. Large amplitude: after optimal designed by computer, the speed of vibration becomes high and the amplitude of front plate becomes large. High power: under the action of the prestressed bolts , piezoelectric ceramic energy reaches to the utmost. Good heat-resistance : of small resonance impedance, little quantity of heat, can be used in a wide range of temperature with long life and high reliability.
Et-500 electropneumatic transducer Input electrical current:4-20ma, 0-10v Output pressure:20-100kpa Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal. Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h). Features: Flow rate: 7.6m3/h when supply pressure is 175kpa 20.0m3/h when supply pressure is 700kpa Min/max. Supply pressure: Minimum-3psig(21kpa) above maximum output Maximum-100psig(700kpa) Sensitivity:
We have many kinds of connector types, such as edwards, utah, argon, philips, ICU/ medex/ elcam/ abbot/ hospira/ biometrix, ace, bd etc, and also we produce monitor cable which have different connector. 30pcs per box
1, high mechanical quality and excellent electro-acoustic conversion efficiency, providing a high ouput amplitude. 2, having steady output amplitude even the load markedly changed. 3, extended using temperature, ensuring god amplitude linearity. 4, ensuring high conversion efficiency
Pcui immersible ultrasonic transducer pack can be used together with our "pcug" - series pulse sweep frequency generator to perform an ultrasonic cleaning equipment. It internally equipped with high power, durable blt transducers with hard chrome plating sonic surface on stainless steel housing to provide a ultra-long life feature. The size and power of transducer pack can be custom made. Generally, the output power can be from 600w to 3600w with one or more frequency combination. The operating frequency can be offered from 25khz to 130khz.
Ultrasonic cleaning transducer Ultrasonic cleaning transducers features: 1 low resonance impedance 2 high mechanical quality factors 3 high transforming efficiency from electrical energy to mechanical energy 4 low calorific capacity 5 good consistencies of frequency and static capacitance
PRODUCT INFO The Zucchini squash has a uniformly cylindrical shape with little to no taper from its stem to blossom end. It can be harvested when it is at its baby stage or when more mature at up to six to eight inches long. Many growers and chefs note that Zucchini will be at its peak flavor and texture when five to six inches in length. The exterior glossy skin of the Zucchini is vibrant to dark green in color and delicate enough to consume. Summer squash such as Zucchini are harvested when immature for best flavor, as a result their skin is delicate and prone to easily bruising and scratching. Its flesh is creamy white in color with a spongy yet firm texture and faint traces of edible seeds. It offers a sweet summer squash flavor with nuances of black peppercorn and nutty undertones. In addition to the fruit of the Zucchini plant the flower blossoms of Zucchini are also edible and offer a mild, squash like flavor. Zucchini squash are a low caloric food and are nearly 94% water. Additionally they offer some vitamin A, vitamin C, calcium and iron. USES Zucchini squash are mild in flavor, extremely versatile and can be prepared in sweet or savory recipes. Grate Zucchini and add squash to muffin or bread batter, or use to make vegetable pancakes and fritters. Thinly sliced Zucchini works well in salads or as part of a fresh (raw) appetizer such as vegetarian carpaccio. When sliced thinly lengthwise Zucchini squash can be an excellent substitute for conventional noodles in pasta preparations. Sliced Zucchini squash can be grilled, steamed, sauteed or battered and fried. Larger more mature squashes are perfectly sized for hollowing and baking when stuffed with meats, cheeses and grains. The Zucchini blossoms additionally can be stuffed with soft cheeses and herbs then battered and fried. The flavor and texture of Zucchini will complement a variety of ingredients such as tomatoes, garlic, corn, eggplant, fresh herbs such as parsley, basil and oregano, olive oil, pine nuts, eggs, citrus juice, sausage, roasted chicken and cheeses such as ricotta, mozzarella and parmesan. Zucchini squash will keep best when kept dry and refrigerated, for one to two weeks. Season Originally grown as a summer vegetable, Zucchini squash is suitable to forced cultivation in temperate climates and is available for harvest year-round.
We offer Tonka Beans, available for immediate delivery, analysis and permits in force. From 500 kg to 30.000 kg. Excellent prices, we quote according to quantity required.We are a company committed to the preservation of the environment, our harvesting practices comply with international standards for bioethical trade.
Laminated glass is one kind of safety glass, and when glass breakage, glass fragments adhering to the interlayer, it can be against forced entry, and avoid fragment damage.PVB laminated glass , clour includes clear /milk /bronze/grey/blue/green/black ,PVB film include 0.38,,mm/0.76mm/1.14mm and so on. booth annealed and tempered laminated glass available , for standard sizes and cut sizes.
Laminated glass is one kind of safety glass , and when glass breakage, glass fragments adhering to the interlayer, it can be against forced entry, and avoid fragment damage.EVA laminated glass, it can be laminated with large range of inserts including PET film, polycarbonates, wood veneer, metal, paper, stones, screen mesh and so on, it is good choice for inner decoration.
Laminated glass is one kind of safety glass, and when glass breakage, glass fragments adhering to the interlayer, it can be against forced entry, and avoid fragment damage. Sentryglas plus (SGP ) laminated glass ,0.89mm/1.52mm/2.28mm The main character: Stronger Performance : SGP glass is five times harder than PVB laminated glass, SGP film can let glass keep the shape ,without fall down.� SGP is suitable to use in stairs, flooring and overhead glazing, laminated glass , with outstanding post-breakage resistance to creep and collapse. Higher Transparence:� SGP film yellow index is only 10-25% of clear PVB ,it is best choice for low iron laminated glass process. Flexible UV option : SGP is good at both UV transmitting option and as traditional UV blocking interlayer. ,it can be made in a specialty, high-UV transmittance sheet, extremely useful when designing controlled environments for many life species .
1. alfalfa hay lucerne (single pressed / double compressed bales 400kg bales) + 700kg bales. 2. teff 3. lamb carcasses a grade lamb 4. airfreight strawberries 5. maize & soybean meal extruded.
Product Introduction: SAND PT4XX6 series pressure transducers are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 400 . This series are produced with special materials and alloyed elastic diaphragm together with delicate processing and debugging. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures Performance Parameters: Pressure Range: 0 ~ 5 MPA ~ 150 MPA ( 0 ~ 750psi ~ 20000psi ); Accuracy: ±0.5% FS; Power: 10VDC ( 6 ~ 12 V DC ); Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc. Probe Heat Resistance: PT4516 Series: 300°C; PT4616 and PT4626 Series: 400°C; Temperature Drift: =500M/500VDC; Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional) Electrical Connections: 6PIN (SD02106P/SD02106S); Thermometric Config: Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional) Thermal Resistance: Pt100 etc. (PT4626 Series Optional) Features: * Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement, can improve the service life of 3 to 5 times (optional); * Special requirement can make to order, delivery date 7 ~ 15 working days; * Optional supporting intelligent digital pressure meter: PS1016-43x series, PS4810-43x series, PS4812-43x series and PS9016-43x series. Order Format: Example1: PT4516-350bar-M18-150-3.33mV/V Note: Product design Model "PT4516". Function code "Null" stands for melt pressure transducer. Coating code "Null" stands for without coating . Pressure range: 0 ~ 350bar. Thread size : M18 * 1.5. Rigid stem length:150mm . Pressure output signal: 3.33mV/V.
for the measurement of electrical variables in heavy current power system RISH Ducer M40 (Fig. 1) is a programmable transducer with a RS 485 bus interface (MODBUS ). It supervises several variables of an electrical power system simultaneously and generates 4 proportional analogue output signals. The RS 485 interface enables the user to determine the number of variables to be supervised (up to the maximum available). The levels of all internal counters that have been configured (max. 4) can also viewed. Provision is made for programming the RISH Ducer M40 via the bus. A standard EIA 485 interface can be used, but there is no dummy load resistor for the bus. The transducers are also equipped with an RS 232 serial interface to which a PC with the corresponding software can be connected for programming or accessing and executing useful ancillary functions. This interface is needed for bus operation to configure the device address, the Baud rate and possibly increasing the telegram waiting time (if the master is too slow) defined in the MODBUS protocol. The usual methods of connection, the types of measured variables, their ratings, the transfer characteristic for each output and the type of internal energy metering are the main parameters that can be programmed. The ancillary functions include a power system check, provision for displaying the measured variably on a PC monitor, the simulation of the outputs for test purposes and a facility for printing nameplates. The transducer fulfils all the essential requirements and regulations concerning electromagnetic compatibility(EMC) and safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001. nSimultaneous measurement of several variables of a heavycurrent power system / Full supervision of an asymmetrically loaded four-wire power system, rated current 1 to 6 A, rated voltage 57 to 400 V (phase to neutral) or 100 to 693 V (phase-ton phase) nFor all heavy-current power system variables n4 analogue outputs nInput voltage up to 693 V (phase-to-phase) nUniversal analogue outputs (programmable) High accuracy: U/I 0.2% and P 0.25% (under reference nconditions) 4 integrated energy meters, storage every each 203 s, storage nfor: 20 years Windows software with password protection for programming, data analysis, power system status simulation, acquisition of nmeter data and making settings DC-,AC-power pack with wide power supply tolerance / nuniversal Provision for either snapping the transducer onto top-hat rails or securing it with screws to a wall or panel
Product Introduction: PT4XX6 series pressure transducers are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 400 . This series are produced with special materials and alloyed elastic diaphragm together with delicate processing and debugging. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures Performance Parameters: Pressure Range: 0 ~ 5MPA ~ 150 MPA ( 0 ~ 750psi ~ 20000psi ); Accuracy: ±0.5% FS; Power: 10VDC ( 6 ~ 12 V DC ); Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc. Probe Heat Resistance: PT4516 Series: 300°C; PT4616 and PT4626 Series: 400°C; Temperature Drift: =500MΩ/500VDC Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional) Electrical Connections: 6PIN (SD02106P/SD02106S) Thermometric Config: Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional) Thermal Resistance: Pt100 etc. (PT4626 Series Optional) Features: * Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement, can improve the service life of 3 to 5 times (optional); * Special requirement can make to order, delivery date 7 ~ 15 working days; * Optional supporting intelligent digital pressure meter: Order Format: Example1: PT4516-350bar-M18-150-3.0mV/V Note: Product design Model "PT4516". Function code "Null" stands for melt pressure transducer. Coating code "Null" stands for without coating . Pressure range: 0 ~ 350bar. Thread size : M18 * 1.5. Rigid stem length:150mm . Pressure output signal: 3.0mV/V. Example2: PT4616-50MPa-1/2"-20-150/470-3.33mV/V Note: Product design Model "PT4616". Function code "Null" stands for melt pressure transducer. Coating code "Null" stands for without coating . Pressure range: 0 ~ 50MPa. Thread size : 1/2"-20UNF . Rigid /Flexible length:150mm/470mm . Pressure output signal: 3.33mV/V. Example3: PT4626-50MPa-M14-150/470-J-3.33mV/V Note: Product design Model "PT4626". Function code "Null" stands for melt pressure transducer. Coating code "Null" stands for without coating . Pressure range: 0 ~ 50MPa. Thread size : M14*1.5 . Rigid /Flexible length:150mm/470mm . Thermometric config: J type thermocouple temperature sensor . Pressure output signal: 3.33mV/V.
1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.
