Hydroxyethyl Methyl Cellulose (MHEC) are water-soluble nonionic cellulose ethers, which are offered as free-flowing powder or in granular form cellulose. Hydroxyethyl Methyl Cellulose(MHEC) is made from highly pure cotton-cellulose by reaction of etherification under alkaline conditions without any organs of animals, fat and other bioactive constituents. MHEC appears to be white powder and is odorless and tasteless. It is featured by hygroscopicity and hardly soluble in hot water, acetone, ethanol and toluene. In cold water MHEC will swell into colloidal solution and its solybility is not influenced by PH value. Similar to methyl cellulose while being added to Hdroxyethyl groups. MHEC is more resistant to saline, easily soluble in water and has higher gel temperature. MHEC is also known as HEMC, Methyl Hydroxyethyl Cellulose ,which can be used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in construction, tile adhesives, cement and gypsum based plasters, liquid detergent ,and many other applications.
Hydroxypropyl methyl cellulose (HPMC) is a kind of odorless, tasteless and non-toxic white powder, 1. Appearance: white or off white powder, odorless and tasteless. 2. Particle size: the passing rate of 100 mesh is greater than 98.5%; The passing rate of 80 meshes is greater than 100%. 3. Carbonization temperature: 280-300 â??. 4. Apparent density: 0.25-0.70g/ (usually about 0.5g/), specific gravity: 1.26-1.31. 5. Discoloration temperature: 190-200 â??. 6. Surface tension: 42-56dyn/cm for 20% aqueous solution. Purpose: As thickener, stabilizer, emulsifier, excipient, water retaining agent, film-forming agent, etc. in the production of coatings, building materials, paint removers, agricultural chemicals, inks, textile printing and dyeing, ceramics, papermaking, cosmetics and other products. The application in synthetic resin can make the obtained products have the characteristics of regular particles, looseness, appropriate specific gravity, excellent processing performance, etc., thus basically replacing gelatin and polyvinyl alcohol as dispersants. In addition, in the construction process of the construction industry, it is mainly used in mechanized construction such as wall building, plaster finishing, caulking, etc; Especially in decorative construction, it is used for pasting ceramic tiles, marble and plastic decoration, with high pasting strength, and can also reduce the amount of cement. Used as a thickener in the coating industry, it can make the layer bright and delicate, do not remove powder, and improve the leveling performance. Function: It can thicken the fresh mortar to have a certain wet viscosity and prevent segregation. (thickening) Water retention is also the most important characteristic, which helps to maintain the amount of free water in the mortar, so that the cementitious material has more time to hydrate after the mortar construction. (water retention) It has air entrainment, which can introduce uniform and fine bubbles to improve the workability of mortar. Performance: 1. It is easy to mix with dry powder formula. 2. It has the characteristics of cold water dispersion. 3. The solid particles are effectively suspended to make the mixture more smooth and uniform. Mix: 1. The dry mixed formula containing cellulose ether can be easily mixed with water. 2. Get the required consistency quickly. 3. Cellulose ether dissolves more quickly and has no lumps. be used as: Waterproof putty for interior and exterior walls External wall insulation mortar Gypsum plaster and gypsum products Cement based plastering mortar and masonry mortar Plate joint filler Tile adhesive Self leveling ground material Water based coatings and paint removers Extruded concrete sheet
Food Grade Methyl Cellulose,Methyl Cellulose
Application: Building,Ceramic,Coating,Ink,Plastic Industry To provide excellent workability and water retention to spray and manual plasters, dry wall joint compounds, tile cements and grouts, extruded mortars under water concretes etc.
Microcrystalline cellulose, sodium starch glycollate, croscarmellose sodium, calcium carboxy methyl cellulose, alpha cellulose, aloe vera gel powder, low substituted carmellose sodium, partially & fully pre gelatinized starch, oxycellulose, cellulose fiber, dispersible cellulose, super absorbent polymer.
Carboxymethyl starch Types: lz-01: purity : 85.0%min, viscosity(2%): 100min Lz-02: purity : 85.0%min, viscosity(2%): 5-10 Lz-03: purity: 80.0% min, viscosity(2%): 5-10 Lz-04: purity : 80.0% min, viscosity(2%): 5-10 Application: cms used in paper-making and dyeing industry for its property of retaining moisture and fluidizing. Cms colloid is transparent and delicate. The viscosimeter is low but viscosity is high. It has good fluid, dissolvability, emulsibility stability and permeability. It used as drying agent, wet end additive and sizing agent in making paper and combines with pva to form oil-resistant and water soluble coating. 25 kgs/bag
1.Type: XYF-1 Viscosity (2% aqueous solution, mpas): 5-40min Degree of substitute:0.45min Ph value (1% aqueous solution ): 8.0-10; Loss on drying(%): 10max Purity (%): 55min. 2. Type: detergent grade cmc 65% Viscosity (2% aqueous solution, mpas): 5-40min Degree of substitute:0.45min Ph value (1% aqueous solution ): 8.0-10; Loss on drying(%): 10max Purity (%): 65min. 3. Type: detergent grade cmc 70% Viscosity (2% aqueous solution, mpas): 5-40min Degree of substitute:0.45min Ph value (1% aqueous solution ): 8.0-10; Loss on drying(%): 10max Purity (%): 70min. Packing in woven bags, net weight 25kgs/bag, Quantity for 20gp container is 25mts.
Ceramic grade CMC NA 1.Type: IH6-3 Viscosity (1% aqueous solution, mpas): 3000min; Degree of Substitute:0.7min; PH Value (1% aqueous solution ): 6.0-8.5; Loss on Drying(%): 10max; Purity (%): 90min. 2.Type: IH8 Viscosity (2% aqueous solution, mpas): 1200min; Degree of Substitute:0.8min; PH Value (1% aqueous solution ): 6.0-8.5; Loss on Drying(%): 10max; Purity (%): 90min. Applications: In ceramics and construction industry, CMC acts as thickener. It is a good agent to stabilize, retain moisture. It is useful to make the material viscoid and less-gelatin. Packing: in craft bag, 25kgs/bag.
Hpmc may serve as thickening agent, dispersant agent, emulsifying agent or film-forming agent, and its ndustrialized products may be applicable to the production of daily chemicals, synthetic resin, construction nd coating materials.
Chemical CMC, sodium carboxymethyl cellulose, cmc, sodium CMC, CMC powder, CMC NA, carboxy methyl cellulose, PAC.
Hydroxypropyl methyl cellulose (HPMC), carboxy methyl cellulose (CMC), ethyl cellulose(EC), methyl cellulose (MC).
Hydroxypropyl MethylCellulose (HPMC) Typical Applications of HPMC:Tile Adhesive Cement Plaster / Dry mix mortar Wall putty Exterior Insulation and Finish System ( EIFS )ï¼?Self-levelingï¼?Crack Fillerï¼? Typical grade Viscosity(NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 2%) HPMC KM400 320-480m 320-480m HPMC KM810M 5500-10000 5500-10000 HPMC KM815M 10000-18000 10000-18000 HPMC KM840M 36000-48000 15000-25000 HPMC MP200M 160000-240000 Min70000 HPMC KM860M 48000-72000 24000-36000 HPMC KM4000 3200-4800 3200-4800 HPMC KM8100M 80000-120000 38000-55000m HPMC KM8100MS 80000-120000 38000-55000 HPMC KM8150M 120000-180000 55000-65000 HPMC KM8150MS 120000-180000 55000-65000 HPMC KM8200M 160000-240000 Min 70000 HPMC KM8200MS 160000-240000 Min 70000
Dear sir: Good day! Our company, Hebei Suna Technology Co.,Ltd., was founded in 2013. Our main products includes HPMC, HEMC, PVA, RDP Titanium Dioxide, Iron Oxide series, Chrome Oxide Green, Zinc Oxide, and so on. Do you need our products, please contact me.
Hebei Suna Technology Co., Ltd. was founded in 2002ï¼?Our main products includes HPMC, HEMC,� RDP,� HEC,� PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products.
Oil Drilling Grade CMC & PAC Description: CMC & PAC in drilling fluid are used as fluid loss agent. The functions is through forming low permeability, flexible, thin and compact filtration cake on borehole wall, to reduce the fluid loss of drilling fluid as much as possible. Used as suspending agent, plugging agent and thickening agent for low solid phase drilling fluid. Applications: 1. Good temperature-resistant and salt-resistant properties. 2. Less influences from mould. Stable characteristics and prolong shelf life. 3. Disperse easily in all kinds of water base drilling fluid. Can be used in any drilling fluids ranging from fresh water to saline water drilling fluid. 4.Prevent fluid flow into pores and cracks. Used as fracturing fluid can control the losses arising from the fluid flow-in to the borehole. 5.Used as fracturing agent for oil production. Provide fracturing fluid sand suspension effect. Can apparently reduce fluid loss and thin filtration cake. Have strong inhibition effect of shale water. Package: 25kg/kraft bag ,or 1000kg/jumbo bag
CMC is binder, dispersing agent and thickener in battery industry. Applications: 1). CMC in alkaline battery is used as protective agglomerating agent of negative pole. 2). CMC is possibly used as binding agent for positive pole and negative pole of high performance battery. 3). Also can be applied as binding agent for nickel-cadmium battery, nickel-metal hydride battery used in electronic tools. 4). Its main advantages are strong adhesion, easy to operate, not influence its conductivity. Package: 25kg/kraft bag ,or 1000kg/jumbo bag
CMC is binder, dispersing agent and thickener in battery industry. Applications: 1). CMC in alkaline battery is used as protective agglomerating agent of negative pole. 2). CMC is possibly used as binding agent for positive pole and negative pole of high performance battery. 3). Also can be applied as binding agent for nickel-cadmium battery, nickel-metal hydride battery used in electronic tools. 4). Its main advantages are strong adhesion, easy to operate, not influence its conductivity. Package: 25kg/kraft bag ,or 1000kg/jumbo bag
Description: Food grade CMC produced by Fortune Biotech is featured by high acid-tolerance, high salt-tolerance, high transparency, few free fiber, few gel granule, fast dissolving speed. Good solution fluidity after dissolving. Molecular distribute uniformly. Purity is more than 99.5% to prevent the food from influence of other substances. Appearance: white powder pH: 6.0-8.5 Viscosity: 25-10000mpa.s Sodium glycolate: 0.4% max Na: 12% max Degree of substitution: 0.75 min Chloride: 5% max Loss on drying: 8% max Total plate count: 500cuf/g max Applications: 1). Increase water retention in food to prolong self-life. 2). Film formation in fried food to reduce fat absorption. 3). Thickening agent. 4). Reduce ice crystals formation in frozen foods. 5). Increase chemical, thermal, and light stability in food. Package: 25kg/kraft bag ,or 1000kg/jumbo bag
Mosquito-Repellent Incense Grade CMC Applying CMC in mosquito-repellent incense can evenly bind the ingredients. Instead of elm powder, CMC has good molding effect. Make the appearance of mosquito-repellent incense much more bright and clean. Meanwhile, increase toughness of mosquito coil. Not easy to crack and break. Good distribution of the ingredients with uniformly distributed pesticide effect, which is slowly released. Package: 25kg/kraft bag ,or 1000kg/jumbo bag
CMC produced by Fortune Biotech is featured by high acid tolerance, high salt tolerance, high transparency, few free fiber, few gel granule, fast dissolving speed. Good solution fluidity after dissolving. Molecular distribute uniformly. Purity is more than 99.5% to prevent the food from influence of other substances. CMC Functions: 1. Applied as finishing agent of fabrics, CMC can replace traditional starch sizing materials. Greatly reduce the environmental pollution during sizing and desizing to fabrics. Meanwhile, CMC form thin form on fabric fibers. Can increase shaping of fabric owing to moisture absorption property of CMC. 2.Used as printing paste in dyeing industry, can increase hydrophile and permeability effect.Have evenly coloring effect and reduce color difference. 3. Used as lubricant and gas forming agent in electrical weding industry. Has properties of lubrication, dropping resistance and extrusion. Package: 25kg/kraft bag
