Coriander, popcorn, white beans, red beans, black beans, beans cranberry, mung beans, adzuki beans, green peas, yellow peas, chickpeas, sunflower seeds, chia seeds, flax seeds, amaranth, sesame seeds, quinoa, maca powder, yerba mate, dried prunes, raisins, peanuts, fruit purees, corn flour, yellow corn, soybeans, durum wheat, red shrimp, illex squid, hake hubbsi, fresh fruit, lemons, oranges, tangerines, apples, pears.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Ethanol Alcohol Process Line /production line Turkey Project Ethanol Alcohol Process Line for different capacity ,customized ,for fuel ethanol/alcohol, medical ethanol/alcohol,food ethanol/alcohol and so on . Alcohol ethanol material can be corn(maize), wheat,potato,cassava,molasses,beetroot or any other material which contains starch or sugar. we offer : 1. Turn key alcohol plant projects which can produce 95% -96%food grade alcohol ,medical alcohol,reagent grade anhydrous alcohol or 99.8% fuel grade anhydrous ethanol.Output can be from 1000LPD to 2millionLPD. 2. Alcohol by-product liquid CO2 cycle equipment, fusel oil separation and purification technology and equipment. 3. DDG protein feed equipment, DDGS protein feed drying equipment. 4. Micro alcohol distillers or brewery that can be used at home or restaurant or hotels 5. vinegar equipment. 6. Waste water environmental processing equipment. 7.OEM service. Design and manufacture alcohol ethanol equipment according to customers requirements or drawings.
99.8% Ethanol Alcohol Process Line /production plant Turkey Project For Ethanol Alcohol Process Line for different capacity ,customized ,for fuel ethanol/alcohol, medical ethanol/alcohol,food ethanol/alcohol and so on . Alcohol ethanol material can be corn(maize), wheat,potato,cassava,molasses,beetroot or any other material which contains starch or sugar. we offer : 1. Turn key alcohol plant projects which can produce 95% -96%food grade alcohol ,medical alcohol,reagent grade anhydrous alcohol or 99.8% fuel grade anhydrous ethanol.Output can be from 1000LPD to 2millionLPD. 2. Alcohol by-product liquid CO2 cycle equipment, fusel oil separation and purification technology and equipment. 3. DDG protein feed equipment, DDGS protein feed drying equipment. 4. Micro alcohol distillers or brewery that can be used at home or restaurant or hotels 6. Waste water environmental processing equipment. 7.Design and manufacture alcohol ethanol equipment according to customers requirements or drawings.
Reesha Sardines in Vegetables Oil is an excellent source of Omega 3 fatty acids which are essential for brain development and growth. The oil is extracted from sardine fish which is rich in omega 3 fatty acids. This product is used as a healthy cooking oil. Available ready stocks in our warehouse Dubai, UAE. We are delivering our goods all over Middle East and African countries. Product Features: - 100% pure vegetable oil. - High quality and freshness guaranteed. - No preservatives or additives. - Free from trans fats. - Can be used for frying, baking, sauting, stir frying, deep frying etc. - Good for health and nutrition. - Easy to cook. - Non-GMO certified. Origin: Indonesia Brand: Reesha Packing: 50x125g Stock: Available Stock in Dubai, UAE
Product Name: Canned Sardine Fish Specification: Halal Premium Quality Healthy and Delicious Sardine Fish in Vegetable Oil. Reesha Sardines in Vegetable Oil is an excellent source of Omega 3 fatty acids, which are essential for brain development, immune system health, heart function, and healthy skin. It contains high levels of protein and low in saturated fat. Brand Name: Reesha Origin: Indonesia Size: 125gx50 tins/ctn Tin type: Easy To Open Loading quantity: 2000 and more Stock: Available ready stocks in our warehouse Dubai, UAE. We are delivering our goods all over Middle East and African countries.
Specification: Halal Premium Quality Healthy and Delicious Sardine Fish in Vegetable Oil. Reesha Sardines in Vegetable Oil is an excellent source of Omega 3 fatty acids. Brand Name: Reesha Origin: Indonesia Size: 125gx50 tins/ctn Tin type: Easy To Open Loading quantity: 2000 and more Stock: Available ready stocks in our warehouse Dubai, UAE. We are delivering our goods all over Middle East and African countries.
Reesha Sardine Fish in Vegetable Oil, now available in 50-125gm cartoons. Perfect for a quick and delicious meal option!. We are proud to offer delivery to all African countries. Get yours today from Reesha Wholesale Food Trading Company in Dubai.
Canned Sardine In Tomato Sauce
Canned Sardine
Canned Tuna
In Olive Oil, Sunflower oil, Soya bean oil, Brine, all sizes available. Please contact us for more details.
In Tomato Sauce, In Brine, In Oil. all sizes available. Please contact us for more information.
