FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Used to make early strengthen agent (concrete strengthening agent and coating material coagulating agent etc) in construction industry. Used as a snow thawing agent for snow thawing work on roads, parking lots, and airports etc. Used in oil well drilling, used as well drilling fluid, completion fluid, well cementation fluid, and workover fluid, and it is also used as dehydrate in petroleum chemical industry. Item Index Appearance gray white or white granule,powder and pellet Purity(CaCl2) % â?¥ 94.0 Alkali metals chloride (NaCl) % â?¤ 5 Alkalinity( Ca(OH)2 % ) % â?¤ 0.2 Sulphates (CaSO4) % â?¤ 0.05 Water Insoluble matter % â?¤ 0.15 PH 7.5-11
- Cuttlefish bone or cuttlebone refers to the internal cartilaginous shell of the cuttlefish, a relative of the squid and octopus. Cuttlefish bone is typically smooth and white, with small, wavy lines or ridges. - Specifications: Origin: Vietnam. Moisture: 12 % max. Calcium content: 34% min. Broken: 3-5% max. Shape: trimmed or untrimmed oval. Clean, whiten, 100% Sun dried, good smell, no chemistry. Length: 1-9cm, 10-15cm, 15-20cm or superb sizes. Width: 4cms on wards. MOQ: 1000kgs.
Product Nature Chemical name:Potassium Amyl Xanthate (PAX) Equivalent to : Z-6, AERO 350 xanthate Molecular Formula: C5H11OCSSK Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form Testing method: Lead acetate titration CAS Number: 2720-73-2 EINECS No.: 213-180-2 Use A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of Cu/pb/ne And Pyrite,especially For The Floatation Of The Gold In Gold And Copper Mine.It Could Make Good Result In Copper And Lead Oxidized Ore.Ofeen Used In Rough Selecting And Scavenging. Specifications Chemical components Specification 1 Specification 2 Purity 85% Min 90% Min Moisture & volatiles 10% Max 4% Max Free alkali 0.5% Max 0.2% Max Packing and Storage 120kg Iron Drum,134 Drums Per 20'fcl,16.08mt; (or 110-180kg Iron Drum) 850kg Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner Bag) 25-50kg Woven Bag
Minimum Order Quantity:1 Accept Small Orders: No Country Of Origin : India Business Type: Manufacturer, Exporter, Supplier Type: Activated Application: Water Purification Color: Black Product Details Purity : 99% Form : Powdered Hardness : >90% Features & Benefits Powdered activated carbons (PAC) are defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm) and smaller. CG Carbon manufactures many types of powdered activated carbon products, each specifically engineered to provide a unique pore structure and adsorption properties. By varying manufacturing conditions, internal pore structures are created by imparting unique adsorption properties specific to each product type. The choice of product for a specific application will vary due to differing impurities and proprietary process conditions. The adsorptive capacity of CG Carbon's powdered activated carbon (PAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. With efforts to be environmentally responsible, CG Carbon can reactivate spent Granular Activated Carbon (GAC) through thermal oxidation to make react PAC. Cg Carbon backs its products with comprehensive analytical support including feasibility studies and cost evaluations, together with complete system design, service, and troubleshooting. Customers get the expertise of an industry expert in powdered activated carbon backed by a commitment to service one can trust
Gremlog Trading DMCC is a leading supplier of recycled carbon anodes, a sustainable solution with versatile applications. Derived from a meticulous recycling process, our recycled carbon anodes serve as essential components in aluminum smelting, facilitating efficient electrolytic reactions. Carbon Anodes / Anode Butts represent the residual portion of prebaked anode carbon blocks used in electrolytic tanks.Our Carbon Anodes / Anode Butts boasts a high calorific value and low moisture content, making it an ideal choice for various applications. The calorific value of 1 ton of Carbon Anode Scrap is equivalent to that of 1.5 tons of metallurgical coke, showcasing its efficiency and energy density.At Gremlog, we go beyond supplying raw materials. Our in-house Engineering Division is equipped to provide comprehensive support, ensuring a thorough understanding of individual requirements. This commitment to excellence positions us as your reliable partner for superior-quality Carbon Anode Scrap and unparalleled technical expertise.This sustainable alternative not only reduces environmental impact but also contributes to cost efficiency in aluminum production. Elevate your industrial processes with our recycled carbon anodes, where innovation meets environmental responsibility.Explore the quality offerings of Carbon Anodes / Anode Butts at Gremlog Trading DMCC
Colour pigments, industrial chemicals,plastisol inks , antioxidant , bentonite /calcium carbonate / mica / talc / wollastonite / feldspar / kaolin (china clay) bezaldehyde , caramel , detergent chemicals , enzymes feed / textile / leather. fragrances , gum & modified gum , leather auxiliaries / chemicals magnesium oxide / magnesium sulphate heptahydrate / monohydrate / anhydrous, maize starch powder (corn starch powder) , manganese sulphate monohydrate / manganese oxide , mono chloro /sodium mono chloro acetate , paint driers , para chloro ortho nitro aniline , disperse dyes, fluorescent coolant dyes (water soluble) , phosgenated salt free / low salt paper colour (direct dyes) ,ultra marine blue pigment , vat indigo blue grain , water soluble fluorescent soap colour / agriculture green , wool dyes, carbon black, detergent & soaps, herbal extract , household & industrial cleaning products.
Cuttlefish bone refers to the internal cartilaginous shell of the cuttlefish, a relative of the squid and octopus. Cuttlefish bone is typically smooth and white, with small, wavy lines or ridges. A cuttlebone is not actually a bone, but rather the internal shell of the Cuttlefish, a small, squid-like cephalopod. In the Cuttlefish, the cuttlebone is filled with gasses and helps control the fish's buoyancy in the water. While for years people have harvested and used cuttlebones for various purposes, the most widely recognized use of the cuttlebone is as a supplement and exercise toy for birds. Specifications: Origin: Vietnam Moisture: 12 % max. Calcium content: 34% min. Broken: 3-5% max. Shape: trimmed or untrimmed oval. Clean, whiten, 100% Sun dried, good smell, no chemistry. Length: 1-9cm, 10-15cm, 15-20cm or superb sizes. Width: 4cms onwards. MOQ: 1000kgs.
For smelters that produce Carbon Anodes, Gremlog provides spent Anodes (Anode Butts) from a variety of smelters with different qualities. Those Anode Butts can be used again as raw material for the production of Anodes. We have a variety of different sizes including : 0-1mm/ 1-4mm/ 4-10mm/ 10-30mm/ 30-50mm/ 50-100mm/ 100-500mm / 100-1200 mm / As per request Carbon Anode FC: 93-96 %