Api Carbon Steel Stainless Steel Gate Valve Suppliers and Manufacturers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Product introduction API 5L X80 Pipe is a standardization for pipeline transportation systems within the rock oil, gas, water, and fossil fuel industries. API 5L-X80 steel is used in polar regions, wherever high toughness at low temperatures is needed. Specification: Api 5l X80 Psl2 Sizes Nominal Pipe Size 1/2" to 48 " O.D. Wall Thickness - Schedule 10 through 160, STD, XS, XXS. Api 5l X80 Erw Pipe Standard API 5L X80 (Specification for Line Pipe - ANSI/API specification 5L - 44th Edition, October 1, 2007) Product Specification Level (PSL) API 5L X80 PSL 2 API 5L X80 PSL 1 API 5L X80 Line Pipe Length Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths Api Grade X80 Pipe End Plain, Bevel, Screwed, Threaded Testing and Inspection Reports EN 10204 3.1, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, Destructive Test Report, Non Destructive Test Reports, Mill TC EN 10204 3.1, NABL Approved Lab, Chemical and Mechanical Reports, India Boiler Regulations (IBR) Test Certificate API 5L X80 Pipes Type Seamless / ERW / Welded / Fabricated / CDW Technical data ASTM API 5L X80 Seamless and Welding Steel Tube Mechanical Properties: Grade Pipe body of seamless and welded pipes Weld seam of EW, LW, SAW and COW pipe Yield strength Tensile strength Tensile strength Minimun Maximum Minimun Maximum ASTM API 5L X80 555 (80 500) 705 (102 300) 625 (90 600) 825 (119 700) 625 (90 600) X80 Pipe yield strength: Grade Permissible yield point ratio Yield Strength MPa(min) Tensile Strength MPa Elongation % (min) X80 = 0.90 555 625 â?? 700 20 Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Stainless steel is an iron alloy with a chromium content of at least 10.5%. Chromium forms a thin oxide layer on the surface of steel, known as the passivation layer. This can prevent further surface corrosion. Increasing the chromium content can improve corrosion resistance. Stainless steel also contains varying amounts of carbon, silicon, and manganese. Other elements such as nickel and molybdenum can be added to impart other useful properties, such as enhanced forming ability and increased corrosion resistance. Waste stainless steel refers to stainless steel waste generated from industrial manufacturing and stainless steel processes, as well as stainless steel equipment that has been damaged or scrapped due to long-term use, and stainless steel utensils used in daily life. Our factory produces approximately 20 tons of stainless steel per day, and we have abundant inventory of stainless steel waste with guaranteed quality. Scrap stainless steel is a high-grade alloy steel with a higher value than ordinary scrap steel.

Material : Stainless Steel 304 Type : Welded, Decorative Surface Treatment : Mirror:600G/800G Satin:180# 240#/ 320# /400# Thickness :0.3~2.0mm Length : 5.8meter/ 6.0meter/ 6.1meter or customized Regular Shape :Round/ Square/ Rectangle/ Oval -Click here to see all sizes Slotted Pipe : Double slotted/ Single slotted Tolerance : Out diameter: 0.2mm/ Thickness: 0.03mm ; Length: 10mm/ Weight OR Qty:15%

Solid polycarbonate plastic sheet size Width: 1220mm, 1560mm, 1820mm, 2100mm Length: Any length Thickness: 1.2mm Category: Roofing panels Weight: 1.2kg / mm / m2

Stainless Steel Plate

Stainless Steel Coils

Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.

Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.

Sodium-calcium glass silicone stainless steel Item number.TRFK6521YY 6521Y 6521S 6521M 6521L 6516M 6516L capacity.500ml 750ml 1000ml 1500ml 2000ml 2000ml 3000ml dimension 11*11*10cm 11*11*12.5cm 11*11*15cm 11*11*20cm 11*11*26cm 12.3*12.3*21cm 14.5*14.5*24cm packing General bag/Color box Packing rate 24 24 24 12 12 12 12

Sodium-calcium glass silicone stainless steel Item number.TRFK6502 6503 6504 6505 6506 6507 capacity.500ml 750ml 1000ml 1500ml 2000ml 3000ml dimension 11*11*10.5cm 11*11*14cm 11*11*17cm 11*11*22cm 12.5*12.5*25cm 14.5*14.5*26.5cm packing General bag/Color box Packing rate 24 24 24 12 12 12

BPA Free. Available size 500ml, 750 ml, 1 L, 1.5 L.

We are whole supplier of ss scrap from Japan,Vietnam. Load loose in bag or bundle 20ft / 40ft. payment term: LC Or T/T. Commodity: STAINLESS STEEL GRADE 304, Grade 430.

Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Duplex:3RE60(Cr18) SAF2304 (Cr23) SAF2205 (Cr22) SAF2507(Cr25) Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architectur; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure, Lead Time 7-15 working days

Product introduction Stainless steel 304 and stainless steel 304L are also known as 1.4301 and 1.4307 respectively. 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of 304 being 18% chromium and 8% nickel. 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans. 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. 304H, a high carbon content variant, is also available for use at high temperatures Possible Alternative Grades Grade Why it might be chosen instead of 304 301L A higher work hardening rate grade is required for certain roll formed or stretch formed components. 302HQ Lower work hardening rate is needed for cold forging of screws, bolts and rivets. 303 Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable. 316 Higher resistance to pitting and crevice corrosion is required, in chloride environments 321 Better resistance to temperatures of around 600-900 C is needed 321 has higher hot strength. 3CR12 A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable. 430 A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc. Name MONEL400 Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material MONEL400 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Stainless steel strip is an extension of ultra-thin stainless steel plate, and is also a kind of steel plate used in industry. However, unlike ordinary steel plates, stainless steel strip has a longer shape, and its scope of use is also different from ordinary steel plates. At present, there are many varieties of stainless steel strips, and there are also many different production specifications. Different stainless steel strips use different categories. Cold rolled strip is a specially treated stainless steel strip product. It is another industrial steel strip product, which is made of stainless steel strip as the basic material and is processed by cold rolling mill at room temperature. The rolled strip has excellent characteristics such as smooth surface, flatness, high dimensional accuracy and good mechanical functions, and is often processed into rolls and coated steel plates. Cold rolled strip is widely used in tractor, car and other industrial manufacturing. Hot rolled strip is another kind of stainless steel strip, which has low hardness, easy processing, good ductility and other excellent characteristics, so it is often used as a thin plate. Product Name Stainless Steel Strip Material DIN 1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845 Surface BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Edge Plain Mill Standard ASTM DIN GB JIS EN AISI Grade 201/304/304L/321/316/316L/310S/904L/309S/316Ti/317L/2205/2507, etc Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.