Taps in plastic or brass materials, plastic or brass bath sets.Export
Bismuth is a silvery white to pink metal,which are mainly used to prepare compound semiconductor materials, high-purity bismuth compounds, thermoelectric refrigeration materials, solders and liquid cooling carriers in nuclear reactors, ect. Bismuth occurs in nature as a free metal and mineral. Product Name : Bismuth Ingot CAS NO 7440-69-9 Shape Ingot EINECS NO 231-177-4 Grade 4N Material Bismuth Appearance Silver-white color,with metallic luster,rectangular or trapezoidal rectangular 1. It is mainly used to prepare compound semiconductor materials, thermoelectric refrigeration materials, solders and liquid cooling carriers in nuclear reactors. 2.Used for preparing semiconductor high-purity materials and high-purity bismuth compounds. Used as a coolant in atomic reactors. 3. It is mainly used in medicine, low melting point alloy, fuse, glass and ceramics, and is also a catalyst for rubber production.
Common Name Phoxim Chemical Name A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile Cas NO. 14816-18-3 Mol. Wt. 298.3 �º C M. F. C12H15N2O3PS Specifications 92% TC, 40% EC, 50% EC, 75% EC, 5% GR Physical & chemical properties Appearance: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 �º C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 �º C) K OW logP = 3.38 Henry 4.18�? 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 �º C) Solubility In water 1.5 mg/l (20 �º C). In tolu ene, n-h exane, dichl oromethane. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 �º C). Gradually decomposed under u. V. Irradiation. Toxicity Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. Applications It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
Product name Phoxim Appearance Light yellow to yellow liquid Content 90%TC;25%EC Standard Moisture0.45% Acidity 0.3% Usage It is mainly used for contact and stomach poisoning Lepidoptera larvae and eggs. It is generally used to control underground pests. It can kill a variety of Lepidoptera in crops such as peanuts, wheat, rice, cotton, corn, fruit trees, vegetables, mulberries, and tea. Pest larvae and eggs. Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications.
Molecular Formula: KOH Molecular Weight: 56.11 Other Names: Caustic potash CAS No.: 1310-58-3 EINECS No.: 215-181-3 Port: Qingdao, China Grade Standard: Industrial Grade Appearance: Flake Purity: 90% Solubleness: Soluble Alkali Packing: 25kg/bag HS Code: 2815200000 Application 1. Used for electroplating, carving, lithography, etc. 2. Used as raw material for potassium salt production, such as potassium permanganate and potassium carbonate. 3. In the pharmaceutical industry, it is used to produce potassium borohydride, spironolactone, saparinol, testosterone propionate, progesterone, vanillin, etc. 4. Used in the production of potassium soap, alkaline storage batteries and cosmetics in the light industry. 5. In the dye industry, it is used to produce vat dyes, such as vat RSN. 6. Used as an absorbent for analytical reagents, saponification reagents, carbon dioxide and water. 7. In the textile industry, it is used for printing and dyeing, bleaching and mercerizing, and is mainly used as the main raw material for manufacturing man-made fibers and polyester fibers. It is also used for manufacturing melamine dyes. 8. It is also used in metallurgical heating agent and leather degreasing.
Iron oxide pigment is a kind of pigment with good dispersibility, excellent light resistance and weather resistance.Widely used in building materials, coatings, plastics, electronics, tobacco, medicine, rubber, ceramics, ink, magnetic materials,paper making and other fields. Our iron oxide pigments are the perfect solution for all your coloring needs. Our pigments are made with the highest quality iron oxide and are available in a wide range of colors to suit any project. Whether you are looking for a high quality pigment for your concrete coloring or need a reliable and durable material to meet your plastic or paint coating needs, our iron oxide range is the perfect choice for you. Item Iron Oxide Red Iron Oxide Yellow Iron Oxide Black Type 130A,110,120,s130,190 313, 920,313-1 318, 330, 722 Contents % 96 90 95 PH Value 3~7 3~7 5~8 Oil absorption (ml/100g) 15~25 25~35 15~25 Feature Light resistance, weather resistance, high temperature resistance, durable, do not fade, color stability Application Used in building materials, coatings, plastics, ceramics and other fields Packing Packed in 25kg bags Lead Time Within 15 days after order confirmation
Magnesium ingot Features: 1.Corrosion resistance and light weight. 2.The density of magnesium is 1.74g/cm3 which is even lighter than aluminum 2.7g/cm3, but mechanical strength and chemical stability are much better than aluminum. 3.Magnesium can be directly related to nitrogen, sulfur and halogen such as chemical combination, including hydrocarbons, aldehydes, alcohols, phenols, amines, grease and most of the oil pharmaceutical . Chemical composition : Mg Ingot Brand Chemical composition Mg Fe Si Ni Cu Al Cl Mn others Mg99.98 99.98 0.002 0.003 0.002 0.0005 0.004 -- 0.002 0.02 Mg99.96 99.96 0.004 0.004 0.0002 0.002 0.006 0.003 0.003 0.04 Mg99.95 99.95 0.004 0.005 0.0007 0.003 0.006 0.003 0.01 0.05 Mg99.9 99.9 0.04 0.01 0.001 0.004 0.02 0.005 0.03 0.1 Mg99.8 99.8 0.05 0.03 0.002 0.02 0.05 0.005 0.06 0.2 Application : 1.Magnesium alloys can be used to manufacture aircraft fuselages,engine parts, etc. 2.As strong reducing agent for titanium, zirconium, beryllium, uranium and hafnium production. 3. Magnesium metal is the main alloying element in aluminum alloy 4.Magnesium powder can be used as desulfurizer for steel making. 5. Magnesium also used to make photography and optical instruments, etc. 6.Can be used to produce magnesium fertilizer, promote the absorption and utilization of phosphorus by plants. 7.As an additive agent in conventional propellants and the production of nodular graphite in cast iron.
Properties of Glycerine (Glycerol) Applications/Uses of Glycerine (Glycerol) Industrial applications ·Manufacturing of nitroglycerin, alkyd and epoxy resins ·In medicine, it is used to prepare various preparations, solvents, hygroscopic agents, antifreeze and sweeteners, and to prepare external ointments or suppositories, etc. ·Preparation of various resins ·Used in the textile and printing and dyeing industries to prepare lubricants, hygroscopic agents, fabric anti-shrinkage treatment agents, diffusing agents and penetrating agents ·In the food industry, it is used as a sweetener, hygroscopic agent and solvent for tobacco. ·It is widely used in industries such as papermaking, cosmetics, tanning, photography, printing, metal processing, electrical materials and rubber. ·An antifreeze in automobile and aircraft fuels and in oil fields ·Glycerin can be used as a plasticizer in the new ceramic industry. Daily Use Glycerin is a sweetener and humectant commonly used in the food processing industry, mostly found in sports foods and milk replacers.Product Name: Glycerine Molecular Formula: C3H8O3 CAS No.: 56-81-5 Purity 95%/99.5% Packing: 250kg/Drum Hs code: 2905450000
Product Description Appearance and features white tetragonal crystal molecular weight 23.95 pH(1mol/L) 14 Solubility Soluble in water, slightly soluble in ethanol melting point 471.2�ºC molecular formula LiOHChemical properties It is easy to absorb carbon dioxide and moisture in the air, but the absorption capacity is slightly worse than that of NaOH and KOH. Lithium hydroxide has the general property of alkali, and the following reactions can occur. 1. alkaline reaction It can make purple litmus test solution blue and colorless phenolphthalein to turn red; and its concentrated solution can denature phenolphthalein after experimental verification, so that the solution changes from red to colorless (similar to concentrated NaOH). 2. neutralized with acid HCl+LiOH=LiCl+H2O 3. Reacts with acidic oxides 2LiOH+CO2=Li2CO3+H2O (this reaction is used to absorb carbon dioxide in aerospace) 4. Reacts with metal salt solutions FeCl3+3LiOH=Fe(OH)3â??+3LiCl Usage Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis. The additive of alkaline battery electrolyte can increase the electric capacity by 12% to 15% and increase the service life by 2 to 3 times. It can be used as an absorbent for carbon dioxide and can purify the air in submarines. The chemical equation is: 2LiOH(s)+CO2(g)=Li2CO3(s)+H2O(l). It is used to make lithium salt and lithium-based grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc.; used in petroleum, chemical industry, light industry, nuclear industry, etc. When used in alkaline batteries, the aluminum content is not more than 0.06%, and the lead content is not more than 0.01%. It is used as an analytical reagent, a photographic developer, and also in the manufacture of lithium; it is used as a raw material for the preparation of lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries.
Name LITHIUM CHROMATE CAS No. 14307-35-8 Formula CrLi2O4 Molecular Weight 129.88 RID/ADR UN 9134 6.1 Structure (Physical and chemical properties) Density 1.355 Melting point 844 Solubility 94.6 g/L at 25 Appearance (Orange crystals) Chemical properties (Thermal decomposition, oxidation, soluble in water, methanol, slightly soluble in ethanol, acetone.) (Usage) (Corrosion inhibitor for lithium bromide air conditioner) (Chemical composition) Content Indicators CrLi2O4The content of CrLi2O4 is no less than% 99 The impurity content is not more than)% Na 0.1 Ca 0.1 Pb 0.01 SO24- 0.05 Fe 0.005 Mg / Insoluble matter 0.01
High Quality CAS 12190-79-3 Cobalt Oxide for Lithium Battery Cathode Material Lithium cobalt oxide, also known as lithium cobalt oxide, chemical formula LiCoO2, is an inorganic compound that is generally used as a positive electrode material for lithium-ion batteries. The structure of LiCoO2 has been studied by X-ray diffraction, electron microscopy and neutron powder diffraction. The lithium atomic layer lies between plates of regular octahedrons formed by cobalt and oxygen atoms (shown below). This structure is in agreement with the structure predicted by the theory. Lithium cobalt oxide is toxic and should be handled safely. Items Standard Result Co 60.0�±1.0 59.56% Li 7.0�±1.0 7.18% Na 300max 220ppm Fe 200max 29.0ppm Ni 300max 3.0ppm Ca 300max 22.0ppm Cu 200max 4.0ppm Moisture 500max 156ppm PH 11.2max 10.62 200mesh 100% pass 100% pass Tap Density 2.7min 2.8g/cm3 SSA 0.10-0.30 0.16m2/g D10 3.0min 5.6�¼m D50 8~12 9.9�¼m D100 60.0max 29.0�¼m First Discharge Capacity 158.0min 159.0mAh/g 1. The electrochemical performance is superior a. The average cycle capacity attenuation per cycle 135mAh/g c. 3.6 V first discharge platform rate > 85% 2. The processing performance 3. Tap density is big, help to improve volume specific storage battery 4. Product performance is stable, good consistency
Name LITHIUM TETRACHLOROALUMINATE CAS No. 14024-11-4 Formula LiAlCl4 Molecular Weight 175.73 (RID/ADR) UN 3260 8/PG 2 (Risk) 8 Structure (Physical and chemical properties) Appearance (White or off-white powder) Chemical properties (Water or moisture absorption decomposition) (Usage) (Usage) (For lithium thionyl chloride and lithium chloride,sulfuric acid battery electrolyte preparation) (Chemical composition) Content Indicators LiAlCl4The content of LiAlCl4 is no less than% 98 The impurity content is not more than)% Ca 0.03 Mg 0.01 Ba 0.05 Fe 0.0005 Pb 0.01 NH4 0.01 SO4 0.005 PO4 0.005 H2O 0.1
Product Name LITHIUM OXALATE CAS NO. 553-91-3 Appearance White Powder Purity 99% Density 2.12 Storage Store below +30 C Application Inorganic salt; Organic chemical raw materials Usage LITHIUM OXALATE often be used as organic chemical raw materials.
The Specification For Lithium Titanium Oxide Product: Li4Ti5O12Type: TLB Application: High rate discharge, and good stability TermStandard D10 µ M) 0.2 D50 ( µ M)1.0 D90 ( µ M) 3.0 pH Value 11.5 Pressed Density (g/cm3) 1.20 Specific Surface Area (m2/g) 1.0-2.0 First discharge Capacity (mAh/g), 165-70(0.8-2.7V, 0.2C Button half open cell) First Dischange efficiency(%) 99.7% AppearanceBlack Powder, No Agglomeration, No Sundries Storage, DeliveryAvoid moist Use Time:One Year
Basic Info. Product Name Anhydrous Lithium Acetate CAS 546-89-4 MF C2H3LiO2 MW 65.99 EINECS 208-914-3 Lithium acetate Chemical Properties Melting point 283-285 C (lit.) storage temp. Inert atmosphere,Room Temperature solubility H2O: 5 M at 20 C, clear, colorless form Powder or Crystals color White to yellow Water Solubility 40.8 g/100 mL (20 C) Merck 145,521 Stability: Stable. Incompatible with strong oxidizing agents. roduct Name Anhydrous Lithium Acetate Items Standards Test Results CH3COOLi Content, % 99.0 Min 99.9 Impurity Content, % Na Na+K 0.05 Max Na+K 0.02 K Ca 0.03 Max 0.01 Mg 0.01 Max 0.005 Fe 0.002 Max 0.001 Ba 0.005 Max --- Pb 0.01 Max 0.001 Cl 0.005 Max 0.001 SO4 0.01 Max 0.005 H2SO4 0.2 Max --- Insolubles (In Water) 0.01 Max 0.005
Lithium sulfate quick Details Product Name: Lithium sulfate CAS: 10377-48-7 Molecular Formula:Li2O4S Molecular weight:109.9446 Appearance: White Powder Lithium sulfatetypical Properties Item Specifications Appearance White powder Li2SO4 99% H2O 1.0 Ca 0.01 Fe 0.001 Na 0.06 K 0.1 Mg 0.01 Absorbance 0.1 Lithium sulfateUsage 1. Used as a raw material for special high-strength glass. Analytical reagents. Pharmaceutical industry. 2. Used as an analytical reagent, also in the pharmaceutical industry 3. Mainly used in the production of special high-strength glass, food and synthetic beverage flavoring agents
Product Name Lithium tetraborate CAS 12007-60-2 MF B4Li2O7 EINECS 234-514-3 MOQ 1 kg, please consult for details Sample And Customize Support Delivery Time 7-15 days Shipping Method sea freight,land transport,air transport,express delivery Package standard packaging Payment Method ALL Place of Origin Shandong China Brand worldsun Production Capacity 1000 tons/year Quality Top Quality
Lithium metaborate (LiBO2) is a chemical compound. The chemical formula LiBO2. Molecular weight 49.75. A colorless trisoclinal crystal with a pearly luster. Melting point 845 C, relative density 1.39741.7. Dissolve in water. Decomposition begins above 1200 C. Lithium oxide is formed. The octahydrate is a colorless tripartite crystal with a melting point of 47 C and a relative density of 1.3814.9. Preparation method: It can be made from stoichiometric lithium carbonate and boric acid melting. Purpose: To make ceramic materials. Product Name Best Price LITHIUM METABORATE / Boricacidlithiumsalt / CAS 13453-69-5 CAS NO. 13453-69-5 Appearance White Powder Purity 99% Melting Point 845 C Density 1,4 g/cm3 Storage Store at +5C to +30C Application Intermediates; Biochemical reagent; Chemical raw materials Usage LITHIUM METABORATE is used in pharmaceutical industry and preparation of acid resistant enamels. Appearance and properties: white crystal or powder Density: 1,4 g/cm3 Melting point: 845 C(lit.) Stability: Stable. Application It is used in the pharmaceutical industry and in the preparation of acid-resistant enamels 1). For the pharmaceutical industry and the preparation of acid-resistant enamel 2). 99% is used as a flux in the glass or ceramics production industry. 99.9% is used as an additive for the production of lithium-based greases. LiBO2 % 99.9 min Al % 0.005 max Ca % 0.01 max Fe % 0.005 max Na % 0.01max P % 0.005max Si % 0.01 max LOI(500C/1h) % 2.0 max Bulk Density g/cm3 0.3-0.6
Product Name Lithium nitrate CAS 7790-69-4 MF LiNO3 EINECS 232-218-9 Appearance white powder MOQ 1 kg, please consult for details Sample And Customize Support Delivery Time 7-15 days Shipping Method sea freight,land transport,air transport,express delivery Package standard packaging Payment Method ALL Place of Origin Shandong China Brand worldsun Production Capacity 1000 tons/year Quality Top Quality
CAS No 7550358 Molecular Formula LiBr Application Mainly used as absorption refrigerants water vapor absorbent and air temperature regulator etc Packing 40kgDrum or 300kgDrum24MT20FT Capacity 10000MTSYear Used in inorganic industry used as the removing agent for hydrogen chloride and expanding agent for organic fibers Parameter Specification1 Specification2 LiBr 990 995 K 01 002 Na 01 005 Ca 002 0005 Mg 001 0001 Fe 0002 0001 SO42 01 004 CI 01 0005 Water Content 04 02 Water Insol 01 005
