Board Type Air Shaft Board type air shaft introducing foreign advanced production equipment and fabrication technology, using imported airbag, shaft head for the high quality steel products with nigrescence process, attrib wattle using excellent aluminum and hard oxide, use convenient and long operating rudiments life. When using, match with our company's professional configuration of the aerate gun filling gas for the nozzle jet, to make the shaft of off-axle appearance uniform expansion, thereby lock nitrogen-treated barrel, when unloading, press on deflated mouth to deflated, then nitrogen-treated barrel can be unloaded. Performance and advantages: Air shaft in practical applications, it has advantages of convenient operation, quick, flatulence barrel has big stress area, the stress distribution uniformity etc. Product usage: It is widely used in printing, cutting, coating, compounding and other machineries releasing and winding scroll. Normal export paper tube.
1) One calling bell at each bed head. (GDT07W) 2) One calling bell at each bathroom and toilet (GDT08W) 4) One set of Display Unit in the corridor. (GDH500) 5) One Main Units for pager (GDH300) 6) One pager for each nurse (GDM200) 7) Software for attendance management Total amount will depend on the size of your hospital and the number of nurse, beds, doctor. How it works: When client need service, he or she just press the table button (GDT05), the signal will be transmitted to the waiter's watch receiver though relay station (GDH300). Then, the waiter will receive the table number with a vibration or ¡°DIDI¡± sound on the watch receiver (GDM200). The table number will also be shown on the LCD display machine (GDH100 or GDH500) at same time. The relationship between table number and water receiver will be programmed previously. And if the lead manager would like to appoint some one to service a certain table, he or she could dispatch the waiter by a dispatch machine (GDT20).
1. System Configuration 1) One calling button at each table (for client). (GDT05) 2) One watch pager (receiver) for each waiter (GDM200) 3) (one) set of LCD Display machine. (GDH100 or GDH500) 4) (one) dispatch machine for waiter leading (call waiter or other person) (GDT20) 5) (one) relay station for watch pager (GDH300) 6) ( ) Signal enhancer for transmitter Note: Qty of each unit will depend on the size of Swimming Pool and the number of waiters. How it works: When client need service, he or she just press the table button (GDT05), the signal will be transmitted to the waiter's watch receiver though relay station (GDH300). Then, the waiter will receive the table number with a vibration or ¡°DIDI¡± sound on the watch receiver (GDM200). The table number will also be shown on the LCD display machine (GDH100 or GDH500) at same time. The relationship between table number and water receiver will be programmed previously. And if the lead manager would like to appoint some one to service a certain table, he or she could dispatch the waiter by a dispatch machine (GDT20). Export carton.
Qingdao Luhaiye Industry Co., Ltd. has a history in sheet metal production, pressing,machining and rivet welding for more than ten years; we have gained favorable public reputation product quality, the technical levels or services concerning the aforesaid fields. We always pay attention to the business development with some large-scale enterprises and foreign-funded enterprises. So we have won reliance and recognition from many famous transnational companies and domestic enterprises such as Japan Komatsu,Hitachi Construction Machinery, Japan kubota,TCM, Japan Ebara,South Korea LS, Qingdao Iron and Steel Group Company, Qingjian Alkaline Company and Kaiyuan Heating Power Company. We have developed a wide range of cooperation with these companies, such as external cooperation, the components support, equipment maintenance and reformation,and spare parts and components. We can supply various sheet metal parts according to customer's drawing and demands. For more information, please visit our website or contact us direct. Metal parts are produced in accordance with customer's designs and requirement.Our company supplies quality products and good services at competitive prices.
Qingdao Luhaiye Industry Co., Ltd. has a history in sheet metal production, pressing,machining and rivet welding for more than ten years; we have gained favorable public reputation product quality, the technical levels or services concerning the aforesaid fields. We always pay attention to the business development with some large-scale enterprises and foreign-funded enterprises. So we have won reliance and recognition from many famous transnational companies and domestic enterprises such as Japan Komatsu,Hitachi Construction Machinery, Japan kubota,TCM, Japan Ebara,South Korea LS, Qingdao Iron and Steel Group Company, Qingjian Alkaline Company and Kaiyuan Heating Power Company. We have developed a wide range of cooperation with these companies, such as external cooperation, the components support, equipment maintenance and reformation,and spare parts and components. We can supply various sheet metal parts according to customer's drawing and demands. Metal parts are produced in accordance with customer's designs and requirement. Our company supplies quality products and good services at competitive prices.
Features: 1. It can be Auto-defense and make the ball of the pin head be retractable by pressing the button of the handle, at this time you can let the quick release ball lock pins through the pin hole quickly; 2. When you release the button, the ball will pop-up, Quick release ball lock pins will can't be pull-out; 3. High precision, The tolerance of diameter and length are strict requirements; 4. The coverage of application is widely, according to the environment you can choose to use high-strength alloy steel and stainless steel material; 5. According to the space conditions of handle you can choose L-Model, T-Model, Button Model and Ring-Model and so on. Our quick release ball lock pins can provide various forms of handle, and all kinds of specifications of metric and inch. Our production cycle is shortly, and we have abundant reserves, we also have technology department, the ministry of research design, a fully furnished equipment. We are standby to provide quality services to our clients.
The LD-JX600 COFFEE GRINDER is a commercial applicance to be used in coffee shops,hotels, restaurants etc.it is designed to obtain optimal results in preparing a superior quality coffee. Features: Professional grind provided by large 2.52"(64mm) diameter burrs powered by quiet low speed, high torque motor. Equipped with commercial grinding burrs to provide Maximum grinding precision. Heavy duty cast Aluminum alloy body. Offer a wide range of grind settings,making them suitable to grind coffee for various brewing systems such as espresso,drip, percolators,French press,and others. Micrometric adjustment of coffee with doser adjustment. Built-in timer controller One year warranty. Specifications: Voltage:220/50HZ;110/60HZ Power:350W Bean hopper capacity:2.65lbs(1.2KG) GW/NW:15KG/11.8KG(33lbs./26lbs.) Size:11.8" x 7.87" x 22"(30 x 20 x 56CM) Output:13.23~19.84lbs/hour (6~9kg/hour) Burrs diameters:2.52"(64mm) Color: Red/Silver/Black Carton size: 25.6" x 11" x 15.4"(65 x 28 x 39CM) Agency: CE. 1PC/CARTON, Carton size: 25.6" x 11" x 15.4"(65 x 28 x 39CM).
It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases. No.2 Product advantages: 1. High efficiency, low labor intensity, light in weight, applicable to different types of environment; 2. Unique domestically, advanced internationally. No.3 Technical parameters: 1. Power supply: voltage 380V 50Hz; 2. Power: 3 KW; 3. Weight: 96 kg; 4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered. No.4 Method of usage: 1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape. 2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping. Wooden cases
This machine is a type of special equipment matching other spiral machines. It can be used to press flat soft metallic strip to "Ví¦ or "Wí¦ shape in the production of spiral wound gaskets. The technical parameters of the machine are strictly fixed. All the performance indexes of the gaskets produced by the metallic tape have meet the international technical standards. P.S. It has been exploited into another uses, both as a shape machine and as a spiral machine (the maximum winding diameters DN200) Voltage:380V50 HZ Power:0.5 KW Rotating speed:0-1300 turn/m Rotating speed of principal axis: speed changes randomly Voltage adjuster:0-15V Cylinder travel:100mm Transducer:0-60mm Width of the flat strip: 5.10+0.02mm Width of finished strip: =
This machine is a kind of special equipment for winding during producing the spiral wound gaskets. It adopts certain structural parameter to shape metallic strip and non--metallic filler strip alternately between mould and groove-shape pressing wheel. It can control the diameter force and shearing force effectively by adopting pneumatic and electromagnetic elements so that the technical parameter can be ensured to be invariable and controllable. The machine can complete the winding process automatically by using metallic and nonmetallic long strips and making them feed-in automatically through guide wheel simultaneously, thus it will not be affected by hand operation and the quality is ensured. If this machine is used together with special controller for spiral gaskets, you can set the size of gasket in advance and decreasing the pulling force of the steel strip automatically. The size of the spiral gasket can be controlled automatically and the welding of the gaskets can also be finished automatically (for the diameter of the gasket is larger). In this way, you can improve your efficiency greatly. Main technical parameter: Voltage:380V50 HZ Power:0.8 KW1380rpm Mini winding diameter:DN50 Max winding diameter:DN800 Width of winding sealing plane:50mm Cylinder travel:100mm(60mm is used) Pneumatic pressure:0-0.8Mpa Voltage regulator:0-15V Automatic attenuation voltage:0-3V Dimension 1300 X 2000 X 700mm Weight:300KG.
Commodity: Sealife Light Type:YF-03 Description: 800lm LED Camera lights Type of Battery: 18650 Battery 2200mAH Lighting life: Approx. 1.5hours(Drop down to 25% of the full brightness.) The life of LED: 50,000 hours Working Depth: 100m/330ft Lightness: Approx.800 Lumen Radiation angle: 20 degree Tho model of LED: Bridge lux BXRA-C2000 Color Temperature: 5000í½7300K Features: A)It's could be adjust the damming by hand( Single trigger the "Power source/Modes"key ,it's order as High, Medium ,Low, Explosion flash and SOS) and no grade limit to adjust the damming(Rotation around the press of "Dimming" key); B)Battery Indicator: Green Light(50%)í·Yellow Light(30%)í·Red Light(20%)í·Red lash Light(10 minutes)í·Auto Shutdown; C)Temperature detection and Auto-dimming: When the internal temperature of the torch is exceed the safety temperature value, it 's will automatically adjust the brightness of LED to keeping the temperature within reasonable range. D)Security Gate: When the internal air pressure of electric torch reaches the set value, to ensure the safe use of product that the security gate will be open automatically; E)The charging socket is owned by battery, only an external AC adapter to charging for the battery. Dimension: D:53mm*L:185mm Weight: 389.3g;
Introduction Model WD28-207-828 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX28-207-828 Frame Dimension 8m*1.5m*1.4m Weight 5-7 ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment. Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box.
Introduction Model WD26-200-800/1000 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX 26-200-800/1000 Frame Dimension 8m*1.5m*1.4m Weight 5-7ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
No.1 usage: It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases. No.2 Product advantages: 1. High efficiency, low labor intensity, light in weight, applicable to different types of environment; 2. Unique domestically, advanced internationally. No.3 Technical parameters: 1. Power supply: voltage 380V 50Hz; 2. Power: 3 KW; 3. Weight: 96 kg; 4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered. No.4 Method of usage: 1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape. 2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping. Wooden cases
Product Name:2persons Infrared Weight Loss Slimming Machine Product kind: Slimming machine Product Model: HD-M4 Technology parameter Output power: 20 Operation panel: Digital press key Size of outpacking: 109í-54í-42(cm) Packing material: Aluminium alloy case Weight: 30kg HD-M4 2 persons infrared weight loss slimming machine combine main and collateral channels and acupuncture therapy, with modern computer technology, control electric pulse by the procedure, simulate acupunture massage acupunture point, can make humans body organ relating physiological reaction, adjust bio computer and metabolism, increase human body's lactate dehydrogrnase, adjust human body's incretion, improve human body's metabolism, slow down the speed of glucose transformed into fat, especially, to paly the important part to fat metabolism, can hydrolyze most 3 sour and sweet axunge, and make its leave fat cell, through a series of special decomposition approach, 3 sour and sweet axunge will be transfromed into energy co2 and water being consumed, that fat cell volume will be small, that effect in weight loss and tightening skin.
Product Name:Infrared Energy 2 persons Weight Loss Slimming Machine Product kind:Weight Loss Slimming Machine Product Model:HD- J3 Technology parameter output power: >140W Power frequency: 50HZí¬60HZ Voltage: 100Ví¬240V Operation panel: Digital press key Size of machine:113x49x49(cm) Size of outerpacking:124í-62í-58(cm) Packing material: Aluminium alloy case Weight:60kg Infrared energy 2 persons weight loss slimming machine combine main and collateral channels and acupuncture therapy, with modern computer technology, control electric pulse by the procedure, simulate acupunture massage acupunture point, can make humans body organ relating physiological reaction, adjust bio computer and metabolism, increase human body's lactate dehydrogrnase, adjust human body's incretion, improve human body's metabolism, slow down the speed of glucose transformed into fat, especially, to paly the important part to fat metabolism, can hydrolyze most 3 sour and sweet axunge, and make its leave fat cell, through a series of special decomposition approach, 3 sour and sweet axunge will be transfromed into energy co2 and water being consumed, that fat cell volume will be small, that effect in weight loss and tightening skin.
Product Name:360degree RF 2persons Weight Loss Slimming Machine Product Model: BZL-A Product kind: Weight loss machine Technology parameter The scope of RF frequency: 8-45.67MHz The area of curing head: 7.5cm2 Output of Max peak Energy less than: ¿Q300J/cm2 ú¿T=1Sú¬ Input power: ¿Q500 Operation panel: Digital press key Size: 112í-46í-46ú¿cmú¬ Size of outpacking: 123í-64í-65ú¿cmú¬ Packing material: Aluminium alloy case Weight: 46kg Voltage: 100V--240V Power frequency: 50HZ--60HZ Power: 60W The principle of 360 degree RF Weight Loss Slimming Machine The probe of fat-dissolving of 360 degree energy Weight Loss Slimming Machineis a 21 century latest noninvasive fat-dissolving high technology .It is a Nuclear magnetic, Can stimulate into deep fat cell.The nuclear magnetic can bring a strong knock-on effect when it enter into human body and friction motion among fat cell.So that it can consume thermal efficiently and water content of cell,in this case,the fat cell will be shortened.Fouthermore,the nuclear magnetic shocking can bring strong shock That can make cell explode instantly.Fat cell decrease so that can bring use of weight loss and beauty body.
The cork granules from Chinese cork bark have same physical property as Portuguese, mainly difference from Portuguese is growing naturally without human planting. However, it's easy growing and geographically spreading extensively in the Qinling Mountain Range( dividing China from South to North). The vast cork oak growing region in China ensure the substantial supplying cork material to Chinese cork industry, and let local people not to cut the trees and planting tree to avoid over harvesting. Therefore Chinese come to be the second cork oak growing region in world. Mesh: 32-24(0.5-0.7mm); 24-16(0.7-1.0mm);16-12(1.0-1.4mm);12-10(1.4-2.0mm); 8-4(3.0-5.0mm) Density:55-60KG/L; 60-65KG/L; 65-70KG/L; 75-80KG/L; 85-100KG/L Packaging: woven PP bag, or pressed bales from 25kgs per bale to 40kg per bale.
Multi-function counter with following details. Feature 1. Red led display 2. Backup data for power fail 3. Multi-function intelligent meter, used as counter frequency meter, Speed meter etc. By pressing four key(32 type) 4. Main fold relay output fashion Model and parameter 1.Counting signal impedance more than 100kª+ Input level h more than 5v; l less than 2v Max. Input 50v Step descend edge 2.Contact content ac220v 3a; dc24v 5a (resistive load ) 3.Noise elimination ratio more than nmr 40db (50hz/60hz) ía10% 4.Over range indication digital flashing 5.Operation temperature 0-50ípc,
Sticky mat is mainly placed at the entrance of rooms that need to be dust-proof, or buffer areas . It is also applicable to the production lines of micro-electronic, semiconductor, lcd and pcb industries and so on. It can effectively stick and remove dust from soles , wheels and products to minimize the effect of dust on quality of clean environment. In this way, dust removal is easily achieved, unlike other mats that can not remove dust thoroughly and ensure indiffusibility of dust. The product consists of layers of pe films with digital labels of 1-30++++ on left or right lower corners of each layer to facilitate replacement. Firstly, tear the protective layer on the sticky surface off from the opening of the back. And then, stick it on clean dry access floor level. Press and level the sticky mat on the ground with sole. Tear the protective layer off from the opening of the right side. At this point, it can be used. If the surface of the sticky piece is full of dust during its use, this layer shall be torn off from the opening and then the next clean layer can be used. 30 pages /volume, 10 volumes / box, 5 boxes / case.
