Rail turner Rail turn bar Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded together, utility model turn rail device, turning rail rail with a manual clamp tool. Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a dedicated tool for standing. Place of Origin Hubei, China Type railway tools Material Aluminum alloy Dimensions (L x W x H) (mm) 1800*30*120mm Brand Name Linkage Type: Rail turn bar length 1500mm Applicable rail type: 43/50/60 rail Color: customized Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes
Place of Origin Hubei, China Type railway tools Material Aluminum alloy Dimensions (L x W x H) (mm) 184*50*28cm Brand Name Linkage Type: Rail Track square ruler Product name: Railway Track Square Ruler MOQ 2PCS Size: 1760mm Color: customized Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1)Measure the switch angle steel whether is square when installed 2)Measure the internal lock switch parts whether is square when installed 3)Measure the switch rail whether creeping 4) Measure the sleeper whether square when installed.
Railway Signal Light It can be widely used in railroad , shipping and other traffic and transportation industries and some special industries as signal indication, safety warning and working lighting. Model MSL4730 Type Railway Signal Light Material Plastic Dimensions (L x W x H) 66*170mm Rated Voltage DC3.7V Rated capacity 3.8Ah/3800mAh Lift circle 100000h Battery burn time-signal 12h Battery burn time-lighting 10h Bttery life circle 1000 Charging time 10h Weight 0.25kg Shell protection grade IP65
Rail Gap Gauge Rail Gap Gauge is used for measuring the distance between two adjoining rails Benefits: Joint Gap Measuring Device shape: similar to carrot, tapered. This product is made of stainless steel , long service life. Easy to operate and easy to carry. Place of Origin Hubei, China Type railway tools Material Stainless Steel Brand Name Linkage Type: Rail Gap Gauge Product name: Railway Joint Gap Measuring Device Application Railway Joint Gap Usage: For Railway Track Joint Clearance measurment Color: Silver Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. Place of Origin Hubei, China Type Rail Clamp Material Stainless Steel Dimensions (L x W x H) (mm) 60X60X60 cm Brand Name Linkage Model LJ-JJQT Weight 6.5kg
CTS -1002 Handy Ultrasonic Flaw Detector The CTS -1002 is a light-weightinstrument with excellenterformance which accumulates theexperiences of 50 years for makingultrasonic instruments . Thisinstrument is EN12668-1 : 2010compliance and has anindustrial-leveled TFT display with full WVGA ( 800X480 resolution providing superior visibility in alllighting conditions including direct sunshine. Place of Origin Hubei, China Type Ultrasonic Flaw Detector Dimensions (L x W x H) (mm) 215mm*126mm*53mm Brand Name Linkage Packaging and delivery Packaging Details Carton box Selling Units: Single item Single package size: 28X20X15 cm Single gross weight: 3.000 kg
Rail Thermit Welding Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to ignite the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) 40*15cm Weight 2kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name rail stopper Usage rail stopper Application rail stopper Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Railway Crow Bar It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference. The amount of bend can be tailored to suit each location - and if it turns out that have made the curve too severe, the jim crow can be slotted on the opposite way round and tightened up to ease the curve. Specification Type Crowbar Railway Material Steel Dimensions (L x W x H) 1500mm, 1800mm Place of Origin China Hubei Brand Name Linkage Item railway crowbar Brand Name Linkage Application Wrecking & Demolition, DiggingChiseling Tip Type Chisel End, Rolled Nail Puller for High Leverage, Heeled Pinch End Length 1500mm, 1800mm Weight 6 KG
Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Specification Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) (40*15cm Weight 2kg
Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works. Specification Model LJ-DJQ-D Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 180* 50*190mm Max chamfer diameter �¦ 31~�¦32 Max chamfer cutting torque Tmax = 10N â?¢ m Max moving forceh of handle rod Fmax = 55N (L = 180) Working efficiency 1 piece /10 seconds Overall size 180* 50*190mm Machine weight 1KG
Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & sturdiest types of the jacks and widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments. These Track jacks can be used to lifting both on down and up strocks. They're not only be lowered tooth by tooth but also can be made to tripped off by just moving the trip control. Specification Model LJ-QD15 Type Rail Track Jack Material Stainless Steel Dimensions (L x W x H) 310*165*520mm Rated top lifting force 147HN (15T) Rated hook lifting force 78kN Lifting stroke â?¥270mm Initial height 60mm Weight â?¤25kg
Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track Specification Model YBD-245A Type Hydraulic Railway Track Material Stainless Steel Rated lifing force/ Rated lining force(kN) 245/145 Maximm lifting Quantity/ lining quantity(mm) 135/95 Weight(kg) 23
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque â?¥300 Nâ?¢m Max. fasten torque â?¥150 Nâ?¢m Working efficiency â?¤10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Lithium battery Rail impact wrench machine Double lithium traveling cantilever power wrench (model: LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Model Battery Rail power wrench LJ-LD81901 Rated voltage (DCV) 24-48 Max. torque 3000 N.m motor speed (RPM) 0-3000 optional impact frequency (BPM) 0-5000 optional battery pack capacity (ah) 24-48 operating temperature range (-40 ~ 50 ) operating range m6-m30 torque control adjustable and controllable
Lithium battery Rail impact wrench machine Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Model Battery Rail power wrench LJ-LD81901 Rated voltage (DCV) 18-36 Max. torque 3000 N.m motor speed (RPM) 0-3000 optional impact frequency (BPM) 0-5000 optional battery pack capacity (ah) 18-36 operating temperature range (-40 ~ 50 ) torque control adjustable and controllable
NLB-1800 Rail Bolt Wrench The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work. Specification Model NLB-1800 Type Rail Bolt Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380mm Petrol engine Two stroke petrol engine Rated Revolution 12000r / min Rated power 3.6kw Spindle speed 1130R / min Torque â?¥ 1800n. M
