Welding and Track Maintenance Equipment Gas Pressure Rail Welding Machine Hydraulic rail weld trimmer/Hydraulic Rail shear It's A Special Small Size Machine Suitable For Shearing Thermit Weld Seam.Hydraulic Opreation,Save Labour,Shearing Clean. It's Suitable For Dealing With Various Rails (50-75kg/M) At The Depot Or On The Track. It's An Accessory Tool In Cwr Laying Project, Rail Stress Releasing Operation And Broken Rail Repair.HWS-II Hydraulic Rail Trimmer Is Mainly Composed Of Machine Frame, Manual Pump Station, Two Horizontal Oil Cylinders, Guiding Device, Shearing Knife, Etc,. While Working, Ride The Machine On The Rail (At The Both Side Of The Seam), Place The Guiding Device Nearby The Rail Jaw, Then Swing The Manual Pump Handle Back And Forth. Along With The Cylinder Piston Rod Reaching Out, The Shearing Knife Makes Relative Motion To Produce Shear Force And Remove The Seam Bead.
Welding and Track Maintenance Equipment Gas Pressure Rail Welding Machine Hydraulic rail weld trimmer/Hydraulic Rail shear Itâ??s A Special Small Size Machine Suitable For Shearing Thermit Weld Seam.Hydraulic Opreation,Save Labour,Shearing Clean. Itâ?? S Suitable For Dealing With Various Rails (50-75kg/M) At The Depot Or On The Track. Itâ??s An Accessory Tool In Cwr Laying Project, Rail Stress Releasing Operation And Broken Rail Repair.HWS-II Hydraulic Rail Trimmer Is Mainly Composed Of Machine Frame, Manual Pump Station, Two Horizontal Oil Cylinders, Guiding Device, Shearing Knife, Etc,. While Working, Ride The Machine On The Rail (At The Both Side Of The Seam), Place The Guiding Device Nearby The Rail Jaw, Then Swing The Manual Pump Handle Back And Forth. Along With The Cylinder Piston Rod Reaching Out, The Shearing Knife Makes Relative Motion To Produce Shear Force And Remove The Seam Bead.
Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)
Place of Origin Hubei, China Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) (mm) 180* 50*190mm Brand Name Linkage Max chamfer diameter 31~32 Max chamfer cutting torque Tmax = 10N * m Max moving forceh of handle rod Fmax = 55N (L = 180) Working efficiency 1 piece /10 seconds Overall size 180* 50*190mm Machine weight 1KG Packaging and delivery Packaging Details Pe bag+paper carton, 1 unit/Carton box, Carton box: 23* 10*24 cm, G.W: 1KG Selling Units: Single item Single package size: 23X10X24 cm Single gross weight: 1.000 kg Freya Fei
Place of Origin Hubei, China Type Rail Track Jack Material Stainless Steel Dimensions (L x W x H) (mm) 310*165*520mm Brand Name Linkage Model LJ-QD15 Rated top lifting force 147HN (15T) Rated hook lifting force 78kN Lifting stroke â?¥270mm Initial height 60mm Weight â?¤25kg Packaging and delivery Packaging Details Pe bag+paper carton, 1 unit/Carton box, Carton box:36*22*58 cm, G.W: 32KG Port Shenzhen Supply Ability Supply Ability 500 Unit/Units per Month
Place of Origin Hubei, China Type Rail Clamp Material Stainless Steel Brand Name Linkage Model LJ-JJQT Weight 6.5kg Packaging and delivery Packaging Details Wooden box export standard/ Woven bag+paper carton, 1 unit/Carton box, G.W: 6.5KG Selling Units: Single item Single package size: 60X60X60 cm Single gross weight: 6.500 kg
Place of Origin Hubei, China Type Hydraulic Railway Track Material Stainless Steel Brand Name Linkage Model YBD-245A Rated lining force(kN) 245/145 Maximm lifting Quantity 135/95 Weight(kg) 23 Packaging and delivery Packaging Details Pe bag+paper carton, 1 unit/Carton box, G.W: 38KG Selling Units: Single item Single package size: 36X22X58 cm Single gross weight: 38.000 kg
Place of Origin Hubei, China Type Ruler Material Aumunium Dimensions (L x W x H) (mm) 30*15*5 cm Brand Name Linkage Type Railway ruler Name Rail Feeler Gauges Usage Rail gap measuring Blade thickness 0.01,0.02,0.03,0.05,0.07,1.0mm Weight 135g Approved ISO9001 Color Silver Supply Ability 1000 Unit/Units per Month Certificate CE Warranty 1 year Packaging and delivery Packaging Details Carton box Port Shanghai Supply Ability Supply Ability 5000 Unit/Units per Month
Place of Origin Hubei, China Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg Packaging and delivery Packaging Details Export Standard Wooden box + pe bag+paper carton, 1 unit/Wooden box , Wooden box:151*60*95cm G.W: 105KG Selling Units: Single item Single package size: 151X60X95 cm Single gross weight: 105.000 kg
Battery-powered rail coachscrewing machine is a new product developed by our company in accordance with international requirements for environmental protection. Using lithium battery as energy source, low-voltage and high-current DC motor as power, it has the characteristics of small size and high power. It is suitable for the tightening operation of ordinary sleeper vertical bolts, turnout sleeper vertical bolts, and high-speed railway sleeper plate vertical bolts. BENEFITS *36V super endurance trolley impact Li-battery Wrench *Super endurance capability, 3000 bolts are loosened and tightened per charge (M27 Boltï¼? *Intelligent torque adjustable design, the operator can set the working torque according to the actual working conditions *Intelligent electronic control technology, the actual working torque will not change with the decrease of battery power *Intelligent digital display, working torque and real-time power digital display *The whole machine is waterproof and can work in rainy days, and can also work under minus 30 degrees *The whole machine is 41 kg, which can be quickly disassembled and assembled, which is convenient for loading and unloading without additional tools SPECIFICATION Rated power 2Kw (brushless DC motor) No-load speed 0-1200rpm Frequency 0-2300 bpm Maximum tightening torque 3000Nm Maximum unscrewing torque 3500Nm Switch type Three switches, safety start switch and forward and reverse switch Illumination Dual LED lights Adjustable torque range digital display 80-500Nm (10Nm increment adjustment) Tightening time of M24 bolts 3~5s Weight â?¤41.5Kg (including sleeve and battery pack) Operating temperature requirements minus 30�°C~45�°C Rated voltage of battery 36V Rated capacity of battery 36Ah Endurance 3000 bolts are loosened and tightened per charge (M27 Boltï¼? Battery life 1000 cycle times of charge Waterproof rating of the whole machine IP45 (safe to use even in heavy rain)
This Internal Combustion Rail Drilling Machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below �?13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Weight 23kg Dimensions (L x W x H) (mm) 668�?340�?425ï¼?mmï¼? Place of Origin China Engine Petrol engine :Honda GX50 1.47kW single cylinder,4stroke, forced air colling Displacement 47.9ml Speed 7000rmp Fuel tank capacity 0.63L Max drilling diameter 36mm Drill time â?¤30s Spindle speed at full load 292r/min Drill rod size weldon 19
Place of Origin Hubei, China Type Electric Rail Cutting Machine Material Aluminium Dimensions (L x W x H) (mm) 85*48*50 Brand Name Linkage Model LJ-LDC2001 Rated voltage (AC.V) 220 Motor power (Kw) 7 Weight (Kg) 13 Battery pack capacity(Ah) 12-20 Optional Operating temperature range ( C) -40~50 C Packaging and delivery Packaging Details Export Standard Wooden box + pe bag+paper carton, 1 unit/Wooden box , G.W: 18KG Selling Units: Single item Single package size: 85X48X50 cm Single gross weight: 18.000 kg
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority. SPECIFICATION Model LJ-LQG2101 Weight Machine body13kg battery7kg Cutting 60kg rail time
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation. It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and operate.Light weight structure is convenient to carry. FEATURE Analogue track gauge has the advantages of affordable price,simple operate and easy calibrate. SPECIFICATION Model(1435mm) TGC-W-II 1435 Track gauge(mm) 1410-1470 Check Rail Gauge(mm) 1381-1401 Back to back distance(mm) 1338-1358 Super-elevation range(mm) -150~+150 Super-elevation resolution(mm) 1 Track gauge resolution(mm) 1 Application rail line railway speed less than 160km/h Model for narrow gauge 600mm 900mm 1067mm Model for broad gauge 1520mm 1600mm 1676mm for choose.
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement.Ican be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. FEATURE 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. Bluetooth connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) SPECIFICATION Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4Vï½?5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30 +55 Insulation performance 1M Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error â?¤�±0.25mm Superelevation max indication error â?¤�±0.3mm Length 1700mm Net Weight Net Weight
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge, back to back distance and flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen. FEATURE 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55â?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. 10. Approval by CHINA ACADEMY OF RAILWAY SCIENCES 11.1000mm,1067mm,1435mm,1520mm,1600mm,1676mm track gauge is available. SPECIFICATION Model(1435mm) GJC-TJG1 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range(mm) -200~+200 Flangeway Clearance(mm) 20-107 Superelevation division value(mm) 0.10 Track gauge division value(mm) 0.1 Track gauge max indication error(mm) ±0.25 Superelevation error(mm) ±0.45 Application rail line railway speed less than 250km/h
YD-22 Hydraulic Rail Tamping Machine The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. SPECIFICATION Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine HONDA GX390 petrol engine Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 360kg
Dehydrated vegetables..
All types of rails, Planetary pins, Differential Pins.
Ribbon badges, pin badges smilies, rubber stamp.
