Product Description Model D-3 Electric Tamping Pick Power 350W Material Stainless Steel Voltage 380V Application Tamping The Ballast RPM 2880r/min Exciting Frequecy 48HZ Exciting Force 3kN Pick Plate Form Flexible Weight 24kg Oversize 675*150*255 mm
The product is mainly used for tube sheet welding, the function is to weld the pipe flush or the tube protruding pipe with the plate together, the difference with manual argon arc welding is that the welding process of the equipment is basically fully automatic, the equipment is widely used in heat exchangers, pressure vessels, food, boilers and other industries.
The product is mainly used for the welding of clean stainless steel pipes, the main role is to weld two stainless steel pipes together, single-sided welding and double-sided forming, the difference with manual argon arc welding is that the equipment only needs simple manual operation, the welding process is basically fully automatic, widely used in medicine, food, electronics, semiconductor, water treatment and other industries.
Rail Straight Edge Ruler Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding. Benefits 1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology. 2. The cutting line is made of laser cutting process 3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear. 4. Material: carbon steel Model LJ-PC-1000 Type Rail Straight Edge Material Carbon steel Dimensions (L x W x H) (mm) 1000*20*50mm Measuring range 0-1000mm Measuring surface accuracy 0.04 Weight 2.6kg
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Features 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1Measure the switch angle steel whether is square when installed 2Measure the internal lock switch parts whether is square when installed 3Measure the switch rail whether creeping 4 Measure the sleeper whether square when installed. PRODUCT SPECIFICATIONS Model LJFG-I Type Railway Track Square Material Aluminum alloy Size 1760mm Warranty 1 Year
Platform Gauge Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface and platform plane.(Customizable) Model LJ-TC-I Type Platform Gauge Horizontal measure range 1500-2200mm Height measurement range 200-1300mm or customize Accuracy ± 1 mm
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm)1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nm Max. fasten torque 150 Nm Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Material alumunium Dimensions (L x W x H) (mm) 1500*400*250mm Brand Name Linkage Product name Hydraulic rail tamping machine Usage Hydraulic rail tamping machine Application Hydraulic rail tamping machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Other name track ballast tamping machine function railway ballast tamping work Packaging and delivery Selling Units: Single item Single package size: 280X150X150 cm Single gross weight: 400.000 kg Model YD-22 Power supply Two- stroke petrol engine : 6.6kW Working Pressure 5Mpa Working efficiency 260 slepers/hour Tamping insertion depth 90~120mm under seepers
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name Railway track maintenance equipment Usage petrol Rail Drilling Machine Application petrol Rail Drilling Machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Model NZG-31 Engine GX50 4-stroke petrol engine, air-cooled. Power 1.47kW Spindle revolution 7000r/min Fuel tank capacity 0.63L drilling time 40s/hole
NZG-31 rail drilling machine is compact in structure, and it is the lightest drilling machine in China at present. The rail clamping device has self-locking function, accurate positioning and high drilling accuracy. The n-tailed hollow drill bit can be used to clamp the special twist drill with n-tailed shank under 13.5 according to the needs. It has the function of automatic water supply when drilling. It is a necessary tool for maintenance, rush repair and overhaul operation of Public Works Department. Advantage 1. The water supply at the back of the main shaft is adopted to prevent the cooling water from entering the bearing and reducer, so as to improve the service life of the equipment. 2. When drilling, the rotary resistance is reduced and the drilling torque is increased. 3. The drilling time is shortened and the production efficiency is improved. Specification Model NZG-31 Type Rail Drilling Machine Material Stainless Steel Dimensions (L x W x H) (mm) 650 * 230 * 250mm Engine type four-stroke petrol engine Engine Power 1.2kW Idle Rev 270r/min Borehole diameter 9.8 36mm Drilling time 25s Machine weight 17kg
Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V 5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30â?? +55â?? Insulation performance 1M�© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
Digital Track Gauge Digital switch Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge and back to back distance,flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen. Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. 10. Approval by CRCC , CE certificate. PRODUCT SPECIFICATIONS Model (1435mm) GJC-TJG1 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V 5.2V (rechargeable battery) Working temperature -30 +55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 2.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification item NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque 500N.m Peak torque 1000N.m Weight 18kg
The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work. Specification Model NLB-1800 Type Rail Bolt Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 830*280*380mm Petrol engine Two stroke petrol engine Rated Revolution 12000r / min Rated power 3.6kw Spindle speed 1130R / min Torque 1800n. M
Model Battery Rail power wrench LJ-LD81901 Rated voltage (DCV) 24-48 Max. torque 3000 N.m motor speed (RPM) 0-3000 optional impact frequency (BPM) 0-5000 optional battery pack capacity (ah) 24-48 operating temperature range (-40 ~ 50 â??) operating range m6-m30 torque control adjustable and controllable
Place of Origin Hubei, China Type railway tools Material steel, Alloy Steel Dimensions (L x W x H) (mm) 220*190*140mm Brand Name Linkage Type: rail fork Product Name: four teeth railway fork Usage: railway tool Color: customized Application: Rail fork track work Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes rail steel fork In the process of transporting and crushing mineral resources, steel forks are needed. In the process of railway line construction and maintenance, steel forks are used to shovel stones. There is no tool that can replace steel forks. If steel forks are used improperly, they will often cause damage to the tools, such as broken teeth or broken handles. During use, you should try to put the steel fork against the ground and insert it into the object to be removed. One is to reduce resistance, and the other is to prevent the steel fork from being overly worn. The handle can be replaced if the handle is broken. If the tooth of the steel fork is broken, then The steel fork is scrapped! The product is made of X-quality rail steel as the raw material, forged as a whole, and quenched, with stable quality! It is widely used in railway maintenance and construction projects, and all railway public works departments and related distributors are welcome to purchase.
This rerailer tool is specially developed to solve the problem of double track of train and mine car. Use left and right in pairs. Scope of application: running in the mine ground underground line of the car, due to overspeed, collision, line quality and other reasons, often derailment off track phenomenon, to production, safety has a great impact. Suitable for 24kg/m rail left and right in pairs. Place of Origin Hubei, China Type railway tools Material Aluminum alloy Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Type: rerailer Applicable rail type: 43/50/60 rail Usage: Railway maintenance work Color: customized Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes
Crane rail clip is a welded and adjustable crane rail clip assembly which is designed to fix to heavy rails in the most arduous applications. Its material is forged Q235 or Q345 steel. Each clip has one sets of M16 high strength bolts (8.8 grade). It is designed to withstand a 120 KN (12.2 tonnes) horizontal force from the rail, and the horizontal adjustment is 20 mm. Place of Origin Hubei, China Type Weldable Crane Rail Clip Material Stainless Steel Brand Name Linkage Type: welded Keyword: Crane Rail Clip Usage: Fastening Railway Weight 0.8KGS OEM/ODM: Customization Service Provided Brand name Linkage Material Q235 or Q345 steel
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
