The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy Cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield Conductors are available with either 100% or 133% insulation levels Concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield Cable identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket
Complete Automatic Aluminum Foil Container Making Machine Line Model: SEAC-63A-4 : Max. Mould Lenght 1150mm Units: Automatic Feeder+Automatic 63Ton Press+Cavities Mould+Auto Stacker+Scrap Sucker& Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: Aluminum foil; Thickness: 0.030mm~0.250mm; Alloy: 8011, 8006, 3003, 3005 etc.; 2. Japan Inverter, PLC and 10inch touch screen control system; 3. Max. Width of Aluminum foil: 880mm; 4. Max. Diameter of Aluminum foil: 1000mm; 5. Core diameter of Aluminum foil: 76/152mm; 6. Working speed: 40-75 times/min; 7. Total Power: 11kw+2kw+2kw+1kw; 4Motor 8. Compressed air needed: 0.5- 0.8 Mpa, 0.2m3/min; 9. Install dimension: 7100*2600*3500mm; Technical Data: Max. Mould Size: 1100*900*450mm; Slide block stroke: 180-260mm; Slide block dimension: 380*145mm; Automatic mould height adjust unit: 0.5kw; Work plate dimension: 1100*200*300mm, separated two sets with Balls; Tension: complete automatic adjust; Feeding System: Servo Motor, higher precision and more power; Auto Stacker: SMC lift for stacking system, top quality; Power: 4P, 380V or 220V, 50Hz /60Hz; Net weight: 9,500kg.
Very Profitable Aluminum Foil Container Production Line Complete Automatic Aluminium Foil Container Making Machine Model: SEAC-80/130AS (Four Cavities or Five Cavities Capacity !) Units: Automatic Feeder+Automatic 80Ton H Type Press+Cavities Mould+Auto Stacker+Scrap Sucker & Auto Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1.Raw material: Aluminum foil; Thickness: 0.030mm ~0.280mm; Alloy: 8011,8006,3003,3005; Temper O to H24; 2.Good Japan's Inverter, PLC and 10inch Touch Screen control system; 3.Max. width of Aluminum foil: 1220mm; 4.Max. diameter of Aluminum foil: 1000mm; 5.Core diameter of Aluminum foil: 76mm(152mm as Optional ); 6.Working speed: 40-75 times/min; 7.Total Power: 14kw+2kw+2.5kw+3kw; 8.Compressed air needed: 0.5- 0.8 Mpa, 0.4m3/min; 9.Install dimension: 7100*2600*3600mm; Technical Data: Max.mould size: 1480*1000*500mm; Slide block stroke:150-260mm ; (Offer Stroke adjustable system as option!) Automatic mould adjust unit: 0.5kw; Work plate dimension: 1500*1000mm; Mould handle hole dimension: 80*80mm(Diameter*Depth); Power: 4P, 380/220V, 50/60Hz; Net weight: 13,000kg. SEAC-80AS is the four cavities or five cavities capacity model production line for AFC. Complete automatic level upgrade your factory capacity, lead your company be higher level competition and situation.
Product Description The Abu Garcia Revo AL-F Low Profile Baitcasting Reels were engineered to give anglers the compact performance of the MGX along with the versatility of a heavy-duty fishing reel. The Revo AL-F low profile reel features an aluminum frame for additional strength while the C6 carbon side plates and aluminum main gear allow for maximum weight optimization. Easily adjustable and ultra compact, the ALX is suited to throw baits from lightweight finesse baits all the way through to heavy jigs. Features: 8 stainless steel HPCR bearings + 1 roller bearing X-Craftic alloy frame Carbon Matrix drag system Infini II spool design Infini brake system Compact bent handle and star Flat EVA knobs Aircraft grade aluminum main gear Ti coated line guide Recessed reel foot Lube port Branch Office Shop Fishing Tackles Jl. Jend. Sudirman kav. 112 - 114 Jakarta - 12190 Indonesia
Product Description Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-20 Type Versine Measuring Device Material Aluminum Dimensions (L x W x H) (mm) 100*20*50mm Measure range 20M Weight 157G
Sheet Metal Solutions Sheet metal fabrication is a type of the metal working process that bending the thin metal sheets into the designed shape. HQ factory routinely provides high-quality sheet metal type products to our customers all over the world. SHEET METAL PROCEDURE After we receive the drawings and samples, HQ staff will follow the the procedure below to ensure the customer successfully get the products they ordered. Drawings or measure samples Evaluation by the technical team Decide manufacturing process Confirm with customer Start prototyping or mass production Monitoring and update progress Finished products inspection Shipment SHEET METAL MATERIALS Aluminium Copper/Brass Steel alloy Titanium Alloy Others As one of sheet metal fabrication manufacturers, we can provide different types of aluminum sheet metal for sale, if you have needs, please contact us. We can provide kinds of custom precision machined parts for sale, if you have needs, please contact us.
It is thus anticipated that ASTM B168 UNS N06600 will not oxidize. As a result, logical linkages and applications tend toward oxidation. Applications and associations that are accustomed to high temperatures or stress have a direct bearing on this. 2,4816 When heated, foil migrates toward a thick layer of stable, passivated oxide. This layer protects the metal from further attacks that break it down. Customers refer to Inconel Alloy 600 Bend for high-temperature applications due of its exceptional temperature adaptability. This is because normal steel and aluminum will typically be bombed against creep by the thermally actuated gem opening. Because UNS N06600 Hot Rolled Plate is treated with a plan fortification cycle and precipitation setting process, it has a high degree of flexibility. The amazing content of base part nickel in Inconel 600 Contamination Rolled Plate results in an aftereffect of protection against crumbling, while the high security from oxidation is an instant consequence of the substance of chromium in it. These plates have been passed back and forth among us for a very long time. Our goods are produced in compliance with standard procedure. This helps us to provide Alloy 600 Shim Sheet to our regular customers and to thoughtfully handle large orders.
Titanium Wire ASTM B863 Titanium Alloy Rod Titanium wire We stock a variety of titanium wires, including a full line of commercially pure and medical grade titanium wires. It can provide random length. Titanium wire specifications standardgradetechnologystraightforwardCoillengthsurface ASTM B863ã??ASTM B348ã??ASTM F67ã??ASTM F136 ç� Gr1, Gr2, Gr5, Gr23, etc. hot rolled, cold rolled, rolled Diameter: 1.0mm-10.0mm (tolerance: +/-0.05mm) Diameter: 0.2mm-10.0mm Coil or according to customer requirements Blackened, pickled, polished (diameter>1mm) Titanium wire characteristics Low Density, High Strain Strength excellent corrosion resistance Good heat resistance Excellent low temperature bearing capacity Harmless and non-toxic good thermal performance low elastic modulus Titanium wire application 3D printing fan 3D printing straight wire Aerospace alloys and their applications medical entry automotive application Drilling and Accessories light frame Surgical Instruments construction application cover other materials bolts and bolts corroded web Titanium wire test Slewing ring bend test Metallography (General) microporous near surface inspection Porosity test Meets AMS, ASTM, MIL, DIN specifications Titanium round wire, titanium aluminum alloy wire, nickel titanium wire, titanium ear wire, titanium welding wire, nickel titanium alloy wire are available. We produce according to the exact dimensions given. We are a trusted supplier and have been focusing on titanium wire production for many years. We supply high quality medical grade titanium wire at competitive prices.
Hidden Battery Ebikes 26 inch step-thru electric bike adopts a high-quality aluminum frame, a stronger 500w powerful motor provides the best performance under pneumatic tires, removable battery, mechanical front and rear discbrake design and Shimano 7 speed, making riding more comfortable and stable. It can travel up to 20 miles on a full charge, making it suitable for leisurely weekend cycling around the city. Basic Specification of C-02 Frame Motor Battery Aluminum alloy 500w Bafang motor 48v 13Ah Li-ion battery Derailleur Charger Light 7 speed Shimano gear shift 48v 2A LED light Display Controller Tire LCD display 48v 20A 26x1.75'' KENDA tire Fork Brake Throttle Hydraulic suspension fork Mechanical disc brake Half twist throttle Now the price of 500 watt electric bike for sale is reasonable, anything you need, please contact us. As one of chinese e bike manufacturers, we will do our best to meet all the needs of customers.
Fiberglass windows are known as the fifth-generation window product after wood, steel, aluminum, and vinyl. Fiberglass window frames has the firmness of aluminum alloy, and the thermal insulation and corrosion resistance of plastic steel windows. Fiberglass Fiber reinforced plastic (FRP), also fiber-reinforced polymer, is a composite material made of polymer matrix of polyester or polyurethane being reinforced with glass fibers, it has good benefits in making FRP structural profiles. Advantages of Fiberglass Window & Doors 1. light weight 2. high intensity 3. excellent water sealing property 4. heat preservation 5. electric insulation 6. high durability 7. green and healthy 8. fatigue resistance 9. varied designs 10. easy maintenance People want to buy windows that can be durable for decades with good features of keeping the heat, the cold, the sound outside when windows are closed, we also hope when the window is open it can usher in fresh air and light, so FRP window must be a good choice.
Mesh material has good air permeability. Breathable nano mesh can allow air to circulate. Even if you sit for a long time, you will not feel stuffy. It is highly durable. Made of aluminum alloy, steel and plastic, the mesh office chair is strong and durable. , meets the daily use requirements of employees. Simple maintenance and easy to clean. The simple appearance of the black mesh office chair gives the entire space a fashionable temperament and is suitable for various homes and workplaces. The height and angle can be adjusted according to personal needs, making users more comfortable while working. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
AVAILABILITY OF ALUMINUM SCRAP (GERMANY) NO ADVANCE PAYMENT Alu UBC - 10-15 percent plastic contamination (LDPE foil and PET bottles) - loading weight in 40" hc container 18-20 tons - 80 tons/month Available at the moment. Alu fines - 15 % contamination of plastic, wood and sand - material is from shredding UBC but can also contain some other alloys (mix of 1/3/5/6 series) - we can supply in loose form or in small briquettes - I have attached some pictures of both - 100 tons/month Alu bottle caps - only small amount of glass (little to no free glass, glass dust) - 60 tons/month - loading weight 20 tons 20"hc container.
The parameters of the 6-liter pearl pot are as follows (fully intelligent setting) 1. Customizable 110V, 220V, English export and cross-border e-commerce versions, Provide American, British, European, Australian and other power cables. 2. Chinese operation panel, English manual, English nameplate, English Certificate of conformity, neutral packaging. 3. Power: 900W 4. Material: Aluminum alloy non stick inner liner 5. Single unit weight: 3.9kg, packaging size: 410 * 310 * 320mm 6. One piece of 4 units: 17kg, packaging size: 645 * 420 * 670mm 7. Packaging type: One unit, one white bag+difference sticker (can be labeled)
Product Description The Abu Garcia Orra SX Baitcasting Reels are built from a durable lightweight aluminum frame and spool providing reliability and performance. These baitcasting reels also feature a smooth performing Power Disk drag system which provides up to 15 pounds of drag. These reels give anglers remarkable cast control. Features: 7 stainless steel ball bearings + 1 roller bearing provides smooth operation X-Cr�¤ftic alloy frame for increased corrosion resistance Graphite sideplates Power Disk drag system gives smooth drag performance MagTrax brake system gives consistent brake pressure throughout the cast Compact bent handle and star provide a more ergonomic design Duragear Brass Gear for extended gear life
Titanium tubes come in various grades, each with specific properties suited to different applications. Titanium alloys are known for their excellent strength-to-weight ratio, corrosion resistance, and biocompatibility, making them ideal for a wide range of industries, including aerospace, medical, chemical processing, and marine. Here are some common grades of titanium tubes: Grade 1 (UNS R50250): Commercially pure titanium with excellent corrosion resistance, high ductility, and good weldability. Grade 1 titanium tubes are often used in applications where corrosion resistance and formability are essential, such as chemical processing equipment, heat exchangers, and marine components. Grade 2 (UNS R50400): Commercially pure titanium with slightly higher oxygen content than Grade 1, resulting in improved formability and moderate strength. Grade 2 titanium tubes are widely used in aerospace, marine, and medical applications, as well as in heat exchangers, piping systems, and condensers. Grade 5 (Ti-6Al-4V, UNS R56400): An alpha-beta titanium alloy containing 6% aluminum and 4% vanadium, offering excellent strength, toughness, and corrosion resistance. Grade 5 titanium tubes are commonly used in aerospace, automotive, and biomedical applications, as well as in high-performance sports equipment and marine components. Grade 9 (Ti-3Al-2.5V, UNS R56320): An alpha-beta titanium alloy containing 3% aluminum and 2.5% vanadium, providing a good balance of strength, weldability, and corrosion resistance. Grade 9 titanium tubes are often used in aerospace structures, bicycle frames, and marine components where high strength and corrosion resistance are required. Grade 12 (Ti-0.3-Mo-0.8Ni, UNS R53400): An alpha-beta titanium alloy containing 0.3% molybdenum and 0.8% nickel, offering excellent corrosion resistance in oxidizing and reducing environments. Grade 12 titanium tubes are commonly used in chemical processing, desalination plants, and marine applications where resistance to chlorides and seawater is critical. Grade 23 (Ti-6Al-4V ELI, UNS R56401): An extra-low interstitial version of Grade 5 titanium with enhanced fracture toughness and biocompatibility, suitable for medical implants and surgical instruments. These are some of the commonly used grades of titanium tubes. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, temperature requirements, and cost considerations. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
Description for S&S Cycle T124 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three Piece Flywheel assemblies with main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 cam Stock 96 Twin Cam bolt patter Forged dished piston 4-1/8 bore 4-5/8 stroke 10.2:1 compression ratio Requires oil line installation kit 434-336 for 1999-2006 FLT models, 434-335 for 1999-05 Dyna models 58MM throttle body highly recommended Carbureted engines will require a performance ignition module that allows adjustments to the advance curves S&S engines are shipped without oil 2 Year Warranty
Description for S&S Cycle T111 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three piece flywheel assemblies with the main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 camshafts Stock 96 Twin Cam bolt patter Forged piston 9.8:1 compression ratio 4-1/8 bore 4-1/8 stroke Requires oil line installation kit 725-169 S&S engines are shipped without oil 2 Year Warranty
FRAME 6061 ALUMINUM BRAKES TEKTRO E-725 QUAD PISTON HYDRAULIC W/203MM ROTORS FORK RST Renegade w/100mm Travel, Preload and Lockout (fat)/RST Titan w/140mm Travel, Preload and Lockout (Boost) BRAKE LEVERS TEKTRO HYDRAULIC WITH ADJUSTABLE REACH AND MOTOR CUTOFF HEADSET Threadless 1-1/8 1-1/2 Tapered HANDLEBAR 700mm wide w/31.8mm clamp SHIFTER REAR SRAM NX 11 Speed Trigger STEM PROMAX 70MM (FAT)/PROMAX 90MM (BOOST) REAR DERAILLEUR SRAM NX 11 SPEED GRIPS Velo MTB Bolt-On Grips CASSETTE SRAM 11-42T SEAT POST 31.6MM CHAIN KMC X11E SEAT POST CLAMP QUICK RELEASE CRANK SET 40T Chainring w/170mm Arms, No Chainguard SADDLE SELLAROYAL SETO S1 BOTTOM BRACKET BAFANG ISIS MOTOR BAFANG ULTRA M620 FRONT HUB 150mm 36H (Fat)/110mm 36H (Boost) DISPLAY DPC-18 FRONT AXLE/SKEWER 15mm Thru-QR LIGHTS Integrated Headlight REAR HUB 197MM 36H (FAT)/148MM 36H (BOOST) THROTTLE THUMB THROTTLE REAR AXLE/SKEWER 12MM THRU AXLE ASSIST LEVELS 1-5 RIMS BLACK 26" 36H (FAT)/27.5" BLACK 36H (BOOST) ASSIST TYPE TORQUE, CADENCE TIRES 26x4" (Fat)/27.5x3" (Boost) OTHER Rockshox Monarch RL Rear Suspension w/ 44mm Travel + 184mm Eye-to-Eye, Clamp On Kickstand
The aluminum shell infrared remote control is a powerful and exquisitely designed smart device. The aluminum alloy shell has undergone oxidation and wire drawing treatment, presenting a metallic texture and delicate touch on the surface, balancing fashion and durability. Featuring 8 buttons, each button has a reasonable layout and uses PVC stickers to make the operation more intuitive. This remote control is equipped with a button battery, making battery replacement more convenient, extending its service life, and providing users with a long-lasting and stable control experience. Whether it's controlling a TV, set-top box, speaker, or other household appliances, this remote control can easily meet the various needs of users. The oxidation drawing surface treatment not only enhances the appearance texture, but also improves wear resistance and corrosion resistance, ensuring stability and durability during long-term use. The material of the aluminum shell makes the remote control more lightweight, comfortable to touch, and convenient to carry, allowing users to enjoy a convenient control experience anytime, anywhere. Overall, this aluminum shell infrared remote control combines aesthetics, practicality, and durability, making it an indispensable intelligent control device for modern homes. Its simple and elegant exterior design, high-quality materials, and advanced technology make it an ideal choice for home entertainment. It not only provides a convenient control experience, but also brings users a fashionable lifestyle
Model features: This series of models is an open aluminum alloy profile structure heat shrink baking machine, suitable for electronic wire harness and new energy wire harness heat shrink tubes, circuit boards, inductor wire diagrams, copper bars, hardware accessories and other products (heat shrink baking size range small, but the product size is relatively long), or products that can only be heat-shrunk and baked at one end. 1. The machine uses far-infrared heating tubes for heating (the new energy wiring harness uses thermal radiation heat shrinkable tubes). There are heating tubes installed on the top, bottom, left and right, which can be heated at the same time. It is also equipped with a high-speed centrifugal fan, which can Stir the heat evenly to keep the entire box at a constant temperature; the products that need to be heat-shrunk and baked can be heated at the same time, maintaining the original characteristics of the product, so that the product does not deform or discolor after heat-shrinking or baking, and the quality Stablize: 2. Use high-temperature resistant Teflon mesh belt (temperature resistant 0-350), feeding in assembly line mode, fast baking speed and high efficiency: 3. Aluminum alloy profile structure mode, the mechanical size and structure can be customized and modified at will, and the machine model has a compact structure and exquisite design, and can also be moved and connected to the production line and controlled synchronously; 4. Intelligent control system, the heating temperature and speed can be adjusted at will, which can adapt to the temperature and heat shrinking time needs of different products; 5. Independent control electric box, away from high temperatures; the double-layer design of the heating box is sandwiched with high-temperature insulation cotton (temperature resistance 1200�°C), so that the surface temperature of the box will not be overheated, which not only makes the working environment comfortable, but also reduces Energy waste.