EPE Foam Sheet/Film/Board Recycling Machine,The waste scrap of EPE foam sheet/film/board can recycle and use again. The scrap can directly crush and recycled, no need any other accessory machine. Youtube: Cathy Li JC-foam
EPE-CO2 foam sheet/film production line is the newest generation of EPE foam machine after our company five yearsâ?? self- development and innovation. This machine has the advantages of higher safety and easier operation system, it will totally replace the traditional butane gas foaming. And reduce the fire accident in the working plant and warehouse, it will be the main type of EPE foam machine and development trend in the next ten years. Youtube: Cathy Li JC-foam
EPE Foam Sheet/Film Production Line (No Wave) from JC foam group, This machine is of advanced structure with reliable performance and high-grade automation. It is easy to handle and maintain. And its output is high, being the preferable model compared with the domestic similar machine in performance and price. The products made by this equipment are widely applied to the packing industry, such as the electronic circuit board, electric products, high-grade furniture, motorcycles, shoes-making, wooden floor, cases and bags, hardwares, bicycles, automobiles, pottety, glass wares etc. Youtube: Cathy Li JC-foam
Film laminating machine is also called hot rolling machine, mainly used for rolling EPE sheet/film with aluminum-coating film by heat. It has lots of advantages, such as products looking nice, high efficiency, automatic adjusting, timing and correction, easy opera- tion etc. JC series film laminating machine mainly uses heat-transfer oil as heat-transfer medium, it transfers the EPE sheet and film in the same direction, the products widely applied in the bag-making, floor, decorative materials etc. Youtube: Cathy Li JC-foam
EPE foam sheet/film machine is widly used in producing the EPE thin film or sheet, also calld pearl wool sheet, made by this equipment are widely applied to the packing industry, such as the electronic circuit board, electric products, high-grade furniture, motorcycles, shoes-making, wooden floor, cases and bags, hardwares, bicycles, automobiles, pottety, glass wares etc.
use of sulphur-free additive at screen-making process enables non-existence of brittleness of screens during/after the rounding and polymerization process. Brittleness is the main cause of screen crack and damage on the rotary printing machine win operation. A convenient way to test the brittleness is the so-called "lighter test": a piece of screen sample burnt by lighter flame for 10 seconds, bend the screens sample to see if it breaks at the burnt spot. Can endure 6-7 times stripping by waterjet or LEN
Price: US $355 Site: suwantoro.com Accept Paypal The Epson DX5 water-based print head is used by different series of Epson and Mutoh printers as decsribed in the printer compatibility. It is a new generation print head that allows fast speed, high resolution printing with water-based inks. The Epson DX5 original print head is delivered in a sealed Epson package. This is the original Mutoh print head. Printer compatibility: Epson 4400 / 4450 / 7400 / 7450 / 7800 / 7880 / 9400 / 9800 / 9880, Mutoh RJ901C / 900C / 1604W Part number: PPHEP48V5W
Price: US $391 Site: suwantoro.com Accept Paypal World Class Ink offers a full satisfaction guarantee on all Epson F186000 Printhead We strive to keep all products, including this Epson F186000 Printhead , in stock at all times. World Class Ink will ship your Epson F186000 immediately so that you receive your order quickly and accurately. Once you receive your Epson F186000 Printhead , should you require any assistance at all, please do not hesitate to contact World Class Ink Customer Support. We will make every effort to ensure you are completely satisfied with your purchase of this Epson F186000. Printer compatibility : Epson Stylus Photo R1900 / Epson Stylus Photo R2000
Price: US $1,050 Site: suwantoro.com Accept Paypal This new Epson DX6 print head is suitable for Roland VS series printers. This is the original Roland print head (part number 6701409010). This product carries a manufacturer warranty and a head ID. Manufacturer: Roland Printer compatibility: Roland VS-540 / VS-640 / VS-420 / VS-300 DP part number : PPHROVS01
Price: US $355 Accept Paypal The Epson F160010 water-based print head is used by different series of Epson Stylus Pro 4400 and 7800 printers. This is the original Epson print head is delivered in a sealed Epson package. Printer compatibility: Epson Stylus Pro 4400 / 4800 / 7800 / 9400
Price: US $589 Accept Paypal Nisca Printhead Assembly - PR5300 & PR5310 20,000 prints For use with Nisca PR5300 and PR5310 ID card printers
Price: US $1,367 Accept Paypal Printer compatibility: Seiko Colorpainter H-74S / Colorpainter H-104S / Colorpainter H2-74S / Colorpainter H2-104S This Printhead is suitable for Seiko Colorpainter H series printers. This is the original Seiko part (number U00130650600 replacing U00129498600 and U00112458300).
Price: US $777 Site: suwantoro.com Accept Paypal Printer compatibility: Seiko Colorpainter W-54s / Colorpainter W-64s This Seiko Print Head Body IRH3223T is suitable and exclusive for Seiko Colorpainter W-54s / W-64s printers. This advanced industrial piezo printhead, designed for longevity and high-volume printing environments, has 254 nozzles (in a non-wetting nozzle plate), a built-in damper and supports 3 different droplet sizes . It has a 36mm print width and fires at frequencies of 36, 26 and 18 kHz. This is the original Seiko part (number 61562062 replacing number U00122416700). Note that this new head 61562062 is different from the old head body U00122416700 with an extra protection plate on the nozzle area that increase the printhead lifespan. The old head U00122416700 is not available anymore and it was discontinued. The new head 61562062 works with a new wiper (part number U00129167800). This new wiper is compatible with the old head U00122416700 but the old wiper is not compatible with the new head.
Price: US $922 Site: suwantoro.com Accept Paypal This OEM JV33 print head is used for Mimaki JV33 / JV5 printers. It is a new generation print head that allows fast speed, high resolution printing with ecosolvent or mild solvent inks. This Mimaki JV5 original print head is delivered in a sealed Mimaki package (part number M007947). This print head is not the same as Epson DX5 printhead which does not fit the JV5 printer or JV33 printers running FW 3.1 or higher. Printer compatibility: Mimaki JV5 / JV33 / CJV30 / TS5-1600 / TPC-1000
Price: US $262 Accept Paypal The Skywalker JA 128/50 print head is a high performance, robust and reliable jetting assembly suitable for solvent based, wide format graphics printers at resolutions up to 600 dpi. This print head is supplied together without the head board. Manufacturer: Spectra Printer compatibility: Witcolor Ultra 1000, Crystaljet CJ-S3308SKY, Gongzheng GZCK 3212 AK DP part number : PPHSPSK128
* ccd image automatic alignment * left-right running table * fast operation, quiet and smooth * precision positioning within 0.01mm * one-piece-forming table, evenness in printing quality * 4-cylinder locking, ensure the same thickness in printing * hmi + touch screen, easy to operate, it can record the part number and detect errors * with emergency stop, safety switch, safety gates, warning light * electrostatic eliminator (optional) * dust-free cover (optional)
Place of Origin: Guangdong, China (Mainland) Brand Name: OEM & ODM Model Number: BGMIM Type: Office Appliance Parts Material: Stainless steel, stainless steel 316L,304,17-4PH Ti Name: Cheap and fine custom size printer accessories Weight: =200g Tolerance: 10mm±(0.02-0.04)mm Size: Custom OEM: Accept Sintering environment: Vacuum Forming Method: Powder Injection Molding Sintering method: Solid phase sintering Post-Sintering: Polishing,Wiredrawing,Sandblasting,Plating,Coated,etc.
Weight 50, 55, 60, 65, 70 up to 220 GSM or even higher as per requirement. Size from 30-220 cm Length as per requirement Colors white or as per requirement Imprint one or six colors imprint (on one side or both sides of the bag) Bag opening Zigzag, heat cut, hemmed PE Lining If required polyethylene lining can be sewn in Laminated/Coated available if required inside/outside Perforated yes if required Mesh 4.5 x 4.5 and up to 15 x 15 Packing 1000 bags per bale or as per requirement UV Stabilized As per requirement
Order number: 464300 External length: 165 mm External width: 130 mm Internal length: 150 mm Internal width: 100 mm Material: PET-NY-PE Thickness: 160 mu Closure: Security tape P620: Yes P650: Yes UN3373: Yes Air Transport: Yes Road Transport: Yes
For efficient and sustainable packaging of food and non-food, our new flat bags are the ideal choice. Available in fresh and popular colours such as; pink, light green, light grey and white. All bags com with a modern and stylish matt finish. Due to the material composition, these flat bags are fully recyclable and have an excellent barrier. They are very suitable for powders, sports supplements, pills, seeds, sweets, jewellery, creams, beads or to send samples to your customers. There is a choice of two sizes; 70mm x 110mm and 80mm x 130mm and they are very functional to use. The tearnotches (notches) allow the user to open them easily. All sizes and colours are available both with and without grip closure. Request a free sample or contact us to enquire about the possibilities of printing them and producing them completely customized for you. Standard colors: grey - pink - green - white Standard sizes: 70 x 110 mm - 80 x 130 mm Tailor made and printing possible from 10.000 pieces
