Two-component polysulfide sealant, as known as a two-component, non-sag, premium polysulfide sealant, which is also called polysulfide sealant for building made up of liquid polysulfide rubber, and add tackifying resin, vulcanizing agent, accelerant and fortifier into it. It contains two components and it can vulcanize and crosslink by itself at room temperature. The two components have clear color difference, which makes the mixing more convenient. It can keep good air tightness and water resistance in continuous vibration and temperature changes. In addition, it has a good bonding effect for metal, concrete and other materials. Application The polysulfide sealant is suitable for outdoor or indoor and can be used to seal both static and dynamic joints: Used to caulk at concrete, building, and bridge. Used in anti-leakage caulking of various types of expansion joints, such as waterworks, swimming pools, reservoirs, power plants, dams, sewage treatment works and water supply and drainage systems and other projects. Used as the joints of precast concrete, and the seams of the glass and construction. Used in the seaming of metal siding, and the bonding of aluminum window frame. Using method Add component B and pigment into component A; Stir quickly up and down until it is well mixed; Wipe the mixed sealant in the site where is waiting for construction with a small shovel; Don´t soak and contact with water within 48 hours after construction. Note Component B should be fully added into component A, which will affect the curing time and plasticity; The available time of mixed sealant is 2 hours. So the sealant should be used up as soon as possible after preparation to avoid the paste curing; The surfaces waiting for construction must be clean, dry and frost-free, and must be free of oils, grease, paints, coatings, sealers, curing compound residues, and any other foreign matter that might prevent adhesion; Notice to avoid water and rain within 48 hours after construction.
Nickel Metals,products is a distribution center located in Houston, Texas. It was primarily founded for the sole purpose of providing FROZEN/DRIED FOOD PRODUCTS at a very competitive price. The company accomplishes this goal by purchasing directly from the mill and passing down the savings to the customer. .We do business all over the world with registered documents of operation,we belong in the USA stock market,we are the fastest and reliable, ls team realizes that most customers are located in the Gulf Coast Region. This is why it has opened a location in Houston, Texas to deliver stock more prompt. GENERAL PRODUCTS: Pangasius, basa, shrimp, catfish, tilapia, tuna, seafood, mackerel, sardine, vannamei, apple,avocado, meat, frozen, fish, juice, coconut, chilli, banana, vegetable, canned, sugar kane, pineapple, lime, dried, dry, dehydrated, cassava, taro, jackfruit, durian, leave, , green spice, herb, banana, oil, powder, flour, black, puree, concentrate, salmon, red, pea, passion, orange, FROZEN chicken, beef, cucumber, Quick Details for frozen chicken. Please advise any update from your end against your inquiry live or is closed ? Type: Chicken Product Type: Poultry Style: Frozen Freezing Process: BQF Part: Cutting Feature: Decaffeinated, GM Food, Low-Carb, Low-Sodium, Low-Sugar Grade: Premium Grade "A" Shelf Life: 24 Months Weight (kg): 35 - 60 Grams Brand Name: Frozen Chicken WHOLE/Feet/HIPS/WINGSCHICKEN QUARTER LEGS AND WHOLE HALAL FROZEN CHICKEN Model Number: 2017
190 series diesel engineParts body * cam bearing bush 12VB.01.34 Screw compressor accessoriesLS10-30 oil filter element 250025-525 oil well cementAdditive BSG-2 16YT/YZ-14 Inhibitor Macromolecular Cations subpolymer coating inhibitor CHM Drilling rig top drive accessoriesDQ40/DQ50/DQ70 flushing pipe packing 1.04.02.01 Detroit diesel engine parts crank linkage * connecting rod bolts 16V149 23512064 50103-16-B Phase control relay E10922 Canrig 118375 GLYD RING: 10IN DIA PHD50 PHM TDS Remote Console Accessory FKQ6406 Lubricator QAL-4000 Drill pipe tong accessories ZQ203-100 rear box 02-18M PLUG, O-RING, .562-18 87196-6-S 91255 SEAL, HOUSING PLUG, EXT PIPE 53000-4-S Polyacrylamide compound ammonium salt YLAY NK400E engine*exhaust valve O-ring (rubber) S01-1229-01N Canrig DIAPHRAGM PROT ASSEMBLY 15K DIAPHRAGM PROT ASSEMBLY 15K E17-152 Electric control box FKDQ640-7 Explosion-proof switching amplifier Ifm-N0533A DC 24V Plug, Cavity (93667-M11) 93667-M11 Gear Sprocket , Drum type , Mud pump 3NB-1600GIICLZ12 BZ100 15 14 ND1250M306N BottomDisc*Cab Lifter Hydraulic Lines Inductive sensor-NCB10-30GM40-N0-15M 106283 Liquid end accessories TEM-CPT800C SMP-600 plunger 3 1/2" GT550E Chassis*Tiressteel ring Bulb: 48V 25/10W F/Hyster Fork Lift 2027396 Hydraulic tank accessories F-1300 Shear safety valve piston assembly Semicircle retaining ring BK-8-6A Logging tool accessories dipole acoustic logging tool KClog energy storage capacitor 1025486002 Falcon AIR BLADDER W31-20-901 VOLVOFM12 chassis*Cab jack hose Mechanical seal cover of the reverse rotation pump SB6Ã??8FJP SB68FJP0011 Accessories for cementing toolsFGFX insert head 339.7mm POWER SUPPLY\CANRIG\E12823 For 1275AC-681 General test mining tool turntable square tile ZP-275 Valve group 2 BK-T-2 Centrifugal fan YF 04 11kW explosion-proof Floating hoop FG ZX QZ 177.8mm Drill pipe clamp accessories ZQ203-100 Plug screw 0101-26M HH-0625NC-0225-GR8 Roller shaft accessories ZJ-40L Roller shaft assembly 3H106.28.20.00 109586-3 SHIM: BEARING RETAINER TOP DRIVE TDS-9S Spherical hinge P0900031AA MANIFOLD 109547-2 Elevator drill pipe elevator C DZ 109*109mm 2250 Hydraulic control system accessoriesFKQ6406GS master switch CE 0201-72 Winch oil pump drive shaftParts ZJ-32 winch oil pump CB-B63 Drill pipe tong accessories ZQ203-100 pressure cap 0101-21M pressure gauge YNT60 Y16100 Telescopic cylinder PIN ACTUATOR LINK 30172173 SHIM, RESERVOIR MOUNTING (.002) 110147-1 PNEUMATIC TUBE CLUTCH 600X250, FOR DRAWWORKS, MODEL: JC 70D, MAKE: HH, P/N: 1300008438 NB800G.05.15 Bolt M10x20 Liquid end fittings 45-21OFM600 Valve body 3102008950 H10409 DWYER Instruments Air Pressure Switch 1950-20-2F PDC bit 101.6mm M0864 Liner Seal QF36001-05.15 Filter Element: Hyd. 82749 OK019000701 OK TYPE PISTON SEAL SOCKET SET SCREW, 1/2" x 1/2" LONG SS, Part No: 6119, OEM Part no: 23731 Logging tool accessories four-arm caliper logging tool MAXIS-500 special sleeve tool SLB J97
SHAFT. Catalog number: 0102-05M. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100. TYPE : GEARSHAFT PIN, CLEVIS 30172181-01 Remote Console Accessory FK75-2 globe valve GYJZF-00-00 1/2" General test mining tool casing centralizer 245 ultra-light swirl rigidity M11-1016-010 PRESSURE TEST JOINT PT-3 FOR DISC BRAKE HPU YZ.100S-096 Screw compressor accessories LS12-50HH filter 241771 YO 110/120V E1/6 Drilling rig top drive accessories DQ40/DQ50/DQ70 back pliers 5" V-BELT FOR F-1600HL ZPEC MUD PUMP 6ZV25J-8500 Trunk accessories ZJ-40L Parallel transmission box with pump shaft assembly BA70002-06.00B VOLVO series diesel engine parts fuel * fuel filter 21492771 Submersible pump QY15-26 2.2kW YB90L-2 53732-B CROSS, PIPE 74191 CONNECTOR,COMPRESSION*SCD* VOLVO series dieselMachine parts Generator * Oil pressure gauge 35�?70 BOP AccessoriesFZ35-70 hexagon socket screw JK00213-44 FRONT SEAL, 2-7/8"-5" VARIABLE RAM, FOR BOP 13-5/8" 5000 PSI, MODEL: 2FZ35-35, MAKE: RONGSHENG, P/N: RS11172.16.02 Tee 56530-12-12S SLEEVE FOR HYD DISC BRAKE, MODEL: PSZ 75A, MAKE: HH, P/N: PSZ75A-2-15 CHECK VALVE, PILOT TO OPEN (CKCB-XCN) 93547-1B30N Drilling hoist rope 45mm 200m 6*36WS 1770MPa smooth surface VOLVO series dieselMachine parts cooling system * liquid level sensor 8140024 Washer: Lock Internal/Star, 40MM 86872-40-S High energy mixer accessories JR5321TSN High energy mixer breather valve B030000512A CONTROL SYSTEM, TK01-01-00A BRAKE VALVE LT07MKA-2X Fitting For Varco Tds 56606-8 700048310 HEX HEAD CAP SCREW,7/8-9 X 2 1/2 J429 GR5;ZN Motor ball bearing Mod. 5GEB20C2 SER:RR10090002A Canrig Detroit S60 DieselAccessories fuel system * hand oil pump Drill pipe power tong accessories ZQ203-100 Straight connector 010801-01MI quick coupling 3/8NP H3-62 PIN, CRANK 30158164 LINK 1 COLLAPSIBLE 30170445 CABLE GLAND NPT 3/4 83444-06 Electric control box FKDQ640-7 PLC controller ILC 151 ETH High pressure joints and accessoriesPress nipple 2-7/8" MAN33.373DFC Engine* Fuel Pump 105220-5960 OIL SEAL 80X105X12MM Siemens motor blade 5.145.71322.40 001 Valve pressure exhaust valve BG80-23 safety caliper cylinder assembly for winch JC70DB/JC102TC Drill pipe hanger accessories ZQ125 upper ring gear 19.300.01 Desander CSS 300mm 2 STRAINER, SUCTION 122253-24 E33-1006-010 GASKET, �¦462:�?1, ROTARY TABLE, ZP375,HH ZB013.01.02.05 Drill pipe hanger accessories ZQ-100 transfer cylinder piston rod bit breaker for 8 1/2" Tricone bit LINER, STABILIZER 30158690 Winch intermediate shaft accessories ZJ-45 Gland 106.02.20.42 Valve: Thermostatic 3-Way 97575 SCREW, CAP-HEX HEAD 50006-24-C5D Oil and gas layer protection agent ST-2 Wire Cable Assy.,18/C M614005490-01-25 35�?35 BOP accessoriesFZ35*35RS piston FZ897.1.9 Square welded steel pipe 40*40mm Q235 Adjusting gasket1 1.03.14.331 Cable: Shipboard Multicore, 7C x 1.5 mm2 56625-1.5-07 Touring block hook accessories YG-170 outer spring
WASHER, LOCK REG SERIES 50906-C PIN, COTTER 51403-14-S 161100169 Winch intermediate shaft accessories ZJ-45 sprocket 2Z=36 t=50.8 Drill pipe tong accessories ZQ203-125 pressure cap 01.01-21M Brake device accessories ZJ-50 Power unit drum gear coupling AF5002020205 S01-1269-01V Winch drive shaft accessories ZJ32L6 shift gear BA70011-03.12 Winch Brake Operation AccessoriesZJ-45J brake handle shaft 106.02.50.25 460*2110 Winch intermediate shaft accessories ZJ32L6 Sprocket AF60001-02.04.02 Cable: 4 Tsp, 18 Awg Top Drive 11Sh M614000373 VOLVOFM12 lubrication*The oil filter element is small Remote Console Accessory FKQ6406 liquid gas switch QKY21-15 Support ring 681-20-0 Canrig Fuse Brake Cabinet 660GH or RGS4/ 63A VOLVOFM12 coolingElectrical appliances*Water temperature sensor plug PRESSURE PLATE W24-03-103 Cartridge : Cxda-Xcn For Mdl : Bx-4-50 94536-130N Rod, Crosshead Extension, P/N:908402,MP-16 Drill pipe tong accessories ZQ203-100 gear shaft 0102-20M 190 series diesel engineSpecial tool for pieces * Intermediate hose set 12VB.14.220A Oil Filter, by pass p/n LF777. FLEETGUARD for CUMMINS VTA28 G5. material: steel SCREW, HEX HD, DRILLED SHANK 117989 WASHER TRUST FOR HYDRAULIC POWER TONG MODEL: 16-25, MAKE: WEATHERFORD, P/N: 114489-001 NK500E chassis* lastaxle shaft RETAINER, OIL SEAL 119359 FRICTION DISC W21-07-900 Bearing Main MPN# 3929016 power cable TDSU to lower torque guide or floor or floor junction box E10232(777MCM 230FT) Detroit Diesel PartsFuel system*diesel filter core fine 1900000444 TIMKEN bearing NU244EMA Electromagnetic eddy current brake accessoriesZJ-45 water air hoist low speed CAT3408 diesel engine withParts lubrication system * oil filter ZR-0716 190 series diesel engineParts lubrication system * oil pump assembly G12V190 223.17.00 56529-6-8-S CONN, O-RING BOSS/37 Actuator 2031388-500 56507-6-8-S TEE, BRANCH 37/37/EXT PIPE transmission no. 1 TransmissionShaft accessories ZJ-30 drive shaft JZCDZ150-1220 30172176-502 PIN: COUNTER BALANCE CYLINDER TDS11SA CARTRIDGE, VALVE RELIEF 111664-1EN Cylinder liner piston accessories F1600 mud pump piston nut T57-3005.0 DIES 2162 FOR 3-1/2" DRILL PIPE SLIP 94821 (MT)PLUG,MODIFIED, 3"NPT,W/.38NPT HOLE Benz 2530 After NK400E brake*brake adjustment arm Drill pipe power tong accessories ZQ203 transfer intake pipeâ?¡ 100 05-09M H11744 PISTON 12820-1 51300-349-B O-RING Shockproof pressure gauge YTN-100ZT 0~25MPa 1.6 class 100mm NK400E chassis * wheel Tire screw and cap front left 56501-4-4-S ADAPTER, EXT PIPE/37DEG Coagulant for oil well cementM-19S Piston Rod, P/N:889438,MP-16 S01-1353-01N Bearing Cylindrical Roller Single 00A06C007.013 Integrated oil-way block 1 BK-Z13 Logging tool accessories Borehole parameter logging tool TTR-IB Thermometer parts H050310300 Huanding Transformer T15 600: 24V, 250VA MICROSWITCH RECTIFIER FUSE E15301 Sleeve: Shot Pin 10852289-001 Brake device accessories ZJ50LDB return spring KQ-48
Due to the excellent corrosion resistance of titanium material, the pure titanium flange is much used for connecting the tube ends of the petrochemical project. It is also useful in equipment exit and entrance to connect the two devices. Titanium flange has high strength and corrosion resistance, it can maintain excellent strength at higher temperature, and is known for its ductility and weldability, titanium is usually used for high temperature and high pressure service but light weight applications such as components for the aerospace industry (air frames) and state-of-the-art equipment for the military. It also has excellent corrosion resistance in marine and chloride applications. Product parameters Material: CP titanium, titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc Size: DN10 DN2000 Standard: ANSI B16.5, ANSI B16.47 Pressure: 0.25MPa 32MPa Technology: Forging, Machining, Welding Surface: RF, FF, MFM, TG, RJ etc Product features 1. High fortitude Titanium has a density of 4.51 grams per cubic centimeter, which is just 60% that of steel. Pure titanium has a density similar to ordinary steel, and some high-strength titanium alloys are stronger than several alloy structural steels. 2. Extreme heat intensity Titanium alloy materials can still keep the needed strength under medium temperature circumstances, and can develop and work for a long time at 450-500 C. 3. Good corrosion resistance The corrosion resistance of titanium alloy is much better than that of stainless steel, such as pitting corrosion, acid corrosion, stress corrosion, alkali, chloride, chlorine, nitric acid, , etc. 4. Good low temperature performance The mechanical properties of titanium alloys can be maintained at low and ultra-low temperatures. Ta7 titanium alloy is a titanium alloy with excellent low-temperature performance and extremely low content of interstitial elements. It can maintain a certain degree of plasticity at a temperature of -253 C. Product type Slip-on Neck Flange (SO) Welding neck flange (WN) Socket welding flange (SW) Threaded flange (Th) Lapped joint flange (LJF) Blind flange (BL(s)) Applications Titanium flanges are known for their high strength and light weight, making them excellent for naval applications as well as oil and gas offshore drilling equipment. They're also frequently employed in chemical processing systems that require chlorine and chlorine compounds. While titanium flanges are known for their lightweight strength, zirconium flanges are known for their exceptional corrosion resistance in hostile chemical conditions such as formic acid, nitric acid, and acetic acid. Typical pipe flange Among the applications are: Chemical processing, which includes polymer manufacturing Production of pulp and paper Engineering in the sea Offshore drilling rigs for oil and gas
Introduction to the Double heads stone engraving machine The machine adopts speed regulation frequency conversion automatic drilling. It has good rigidity and flexible operation. Its main engine runs at double speed and has high production efficiency. The machine is mainly used in stele stone, stone, lanterns, handicrafts and other deep hole processing. General situation of Double heads stone engraving machine The machine USES the domestic first-class yonghong display screen, which makes it easy to operate and responsive. The display screen can store 30 sets of punching parameter data. Through the processing tool instruction input, the system automatically calculates the results. In addition, it can be equidistant, non-equidistant switching. The electric box system adopts the most advanced PCL control system of mitsubishi from Taiwan to make the low voltage control the high voltage action. The machine USES servo automatic positioning control, equipped with automatic alarm device. Therefore, it is safe and convenient to operate and maintain. Heat dissipation system adopts 220V fan, mainly used for heat dissipation of oil temperature, oil pipe, motor, etc. The motor can reach 2500 RPM and maintain constant temperature. This enables it to operate normally in harsh environments, ensuring high intensity and stable work. CNC road control valve system is three - way shunt. Separate the hydraulic meter and monitor each group of cylinders to ensure the balanced distribution of pressure. Product feature and application 1.The machine is designed on a separate table to facilitate the operation of large workpieces. 2.This machine is mass production, price advantage is outstanding 3.The machine shall retain the measured processing data before leaving the factory, and deliver the same parts to the customer together after the transaction. 4.Perforation only takes 25 seconds, low loss, high speed. 5.According to customer's processing needs, the company provides special tooling design, production, and processing guidance. The company will provide processing scheme and video processing on the shooting site. Production details 1. The machine can process deep holes between 0.5 and 3.0 diameters on molds of any size and shape, and the depth-diameter ratio can reach 300:1. Especially suitable for processing stainless steel, hardened steel, hard alloy, copper, aluminum and other conductive materials. 2. It can be directly perforated from inclined plane, curved surface, conical surface and ladder 3. The machine is suitable for machining wire-cutting holes and hydro-pneumatic holes on conductive materials of super-hard materials. 4. Machine box type stainless steel building materials, to prevent the box rust. In order to prevent cuts, the box was passivated at the corners. Richard. 5. The machine is equipped with a color touch screen, so it is easy to operate.
Introduction to the Double heads stone engraving machine The machine adopts speed regulation frequency conversion automatic drilling. It has good rigidity and flexible operation. Its main engine runs at double speed and has high production efficiency. The machine is mainly used in stele stone, stone, lanterns, handicrafts and other deep hole processing. General situation of Double heads stone engraving machine The machine USES the domestic first-class yonghong display screen, which makes it easy to operate and responsive. The display screen can store 30 sets of punching parameter data. Through the processing tool instruction input, the system automatically calculates the results. In addition, it can be equidistant, non-equidistant switching. The electric box system adopts the most advanced PCL control system of mitsubishi from Taiwan to make the low voltage control the high voltage action. The machine USES servo automatic positioning control, equipped with automatic alarm device. Therefore, it is safe and convenient to operate and maintain. Heat dissipation system adopts 220V fan, mainly used for heat dissipation of oil temperature, oil pipe, motor, etc. The motor can reach 2500 RPM and maintain constant temperature. This enables it to operate normally in harsh environments, ensuring high intensity and stable work. CNC road control valve system is three - way shunt. Separate the hydraulic meter and monitor each group of cylinders to ensure the balanced distribution of pressure. Product feature and application 1.The machine is designed on a separate table to facilitate the operation of large workpieces. 2.This machine is mass production, price advantage is outstanding 3.The machine shall retain the measured processing data before leaving the factory, and deliver the same parts to the customer together after the transaction. 4.Perforation only takes 25 seconds, low loss, high speed. 5.According to customer's processing needs, the company provides special tooling design, production, and processing guidance. The company will provide processing scheme and video processing on the shooting site. Production details 1. The machine can process deep holes between 0.5 and 3.0 diameters on molds of any size and shape, and the depth-diameter ratio can reach 300:1. Especially suitable for processing stainless steel, hardened steel, hard alloy, copper, aluminum and other conductive materials. 2. It can be directly perforated from inclined plane, curved surface, conical surface and ladder 3. The machine is suitable for machining wire-cutting holes and hydro-pneumatic holes on conductive materials of super-hard materials. 4. Machine box type stainless steel building materials, to prevent the box rust. In order to prevent cuts, the box was passivated at the corners. Richard. 5. The machine is equipped with a color touch screen, so it is easy to operate.
Specification Details: 1) Gr. 4130 Chemical Component Analysis(%): C: 0.28-0.33; Mn: 0.40-0.60; Si: 0.15-0.35; S: < 0.040; P: < 0.040; Cr: 0.80 -1.10; Mo: 0.15-0.25; 2) Monthly Capacity: 6000 tons. 3) 4130 SR Condition's Mechanical Properties: Ultimate Strength: > 724Mpa; Yield Strength: > 586Mpa; Elongation: > 10%; Rockwell Hardness B Scale: 95; 4) Delivery Condition: Annealed(A), Bright Annealing, Normalized(N), Stress Relie f Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 5) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-DIP paint black with two plastic caps on each end 6) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 7) Relevant Test: ASTM 519-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield Strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 8) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 9) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 10) Packing Type: Round, Square, Rectangle, Hexagon. Streamline, etc; 12) Applications: Automobile Industry, Mechanical & Engineering, Fluid Power, etc. 13) Place of origin: China 14) whatsapp: 0086 13812877559 15) e-mail: tubesolution at sina.com Commercial Information: 1) Delicery time: (45-60) days ready at mil also according to the actual weightl; 2) Minium order: 5 Ton; (some specification are excepted) 3) Term of payment: T/T or L/C; 4) Delivery Port: Shanghai Port; 5) Offer Validity: 5-7 Days; 6) Container: 20GP or 40GP or Bulk; 7) Manufacture methods: Cold Finished method or hot finished Method.
Hipped geomembrane for landfill closures waterproof liner 0.1mm-3mm/m2 1. Geomembrane specifications 1) Thickness : 0.15mm - 4.0mm. 2) Width : Within 8 m (1m-8m). 3) Length : 50m-100m/roll (as request). 4) Material : HDPE,( LDPE, LLDPE, PVC, EVA ). 5) Color : Black , white , red , blue , or as required. 6) Optional surface : Textued(one or two side) or smooth surface. 7) Certificate:CE/ISO9001,14001 2. HDPE geomenbrane Features Good mechanical properties, high tear strength, deformation and adaptable, puncture resistance, anti-aging, anti-ultraviolet-resistant, Anti oil and salt, pH, anti-corrosion, high temperature-resistant, non-toxic, long service life. water, drainage, seepage, the good effect of moisture, width, thickness of the full range of specifications and low cost, simple construction. 3. HDPE Geomembrane Applications 1) Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) . 2) Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.). 3) Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.). 4) Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.). 5) Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.). 6) Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.) HDPE geomembrane NO. Items Value Common Environment 1 Thickness (mm) 0.2 - 4 2 Width (m) 2.5 - 8 3 Tensile Strength(TD/MD) MPa ?7 ?¥25 4 Elongation at Break(TD/MD) % ?¥4550 5 Strength at Tear(Right-angle Tear) N/m?110 6 Carbon black content % 2.0 - 3.0 2.0 - 3.0 7 Anti-crack F20 ,1500 8 -70low temperature impact brittle prope pass 9 Oxidative Inducement Time at 200°C,m20 LDPE geomembrane NO. Items Value 1. Thickness (mm) 0.2 - 3 2. Width (m) 2.5 - 9 3. Tensile Strength(TD/MD)MPa14 4. Elongation at Break (TD/MD) 400 5. Strength at Tear(Right-angle Tear)N/m50 6. Permeability coefficient of Vapour(g.cm/cm2.s.p)
The cloth belt can be considered a standard V-belt. The term wrap comes from the fabric that covers the inside of the belt, giving it a very uniform look and feel, as well as fairly quiet handling characteristics. The top and bottom are encased by the wrapper. Two sides are rubber. V belt with toothed grooves is designed at the bottom to improve the bending property. Features â?¢ Large intensity, high flexibility, good durability; â?¢ Special bottom rubber used, small elongation and long service life; â?¢ Excellent heat-resistence, oil-proot, and wearing resistence; â?¢ High transmission efficiency; â?¢ Suitable for band pulley with minor diamenter; â?¢ Safe performance can be guaranteed even during high-speed operation. Our factory is located in Beiding Industrial Zone in Ren County of Hebei Xingtai. And it is the largest rubber production and export base in North China. We are a professional belt manufacturer. Based on the principle of honesty and mutual benefit, we are willing to build up stable cooperative relations with friends at home and abroad for a bright future. ABOUT US They are sales personnel in our company--- professionally trained, proficient in products and good at communication in English. So what we can do for you? The accurate and detailed quotation can be given at the first time. We can also give you professional advices to help you make the best choice. You will find a trust-worthy trading partner and friend among us. OUR FACTORY We have established long-term business relations with over 40 countries such as USA, Canada, India, Pakistan and Indonesia. It covers an area of 5600 square metres, with total asset of 10,000,000 RMB and about 200 staff including 15 senior engineers and 20 technicans.
Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery pk belt PRUDUCT STRCTURE 1.TOP Rubber Poly Cotton Canvas 2.Buffer Rubber CR 3.Tensile Member Polyester 4.Bottom Rubber CR pk belt PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Product Paramenters If you have special requirements,Please contact us and we will us to satisfy your needs. Manufacturing Technique Company Profile HEBEI BOSHUO AUTO TECH CO.,LTD established in 2014, is specialized in design, research, prodiction and sale of v belt, raw edge v belt, poly v belt, industrial timing belt, auto timing belt etc.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Please tell us your needs and we will give you the best service. Products Description Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRUDUCT STRCTURE 1.TOP Rubber Poly Cotton Canvas 2.Buffer Rubber CR 3.Tensile Member Polyester 4.Bottom Rubber CR PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant
Nickel mesh anode is an anode material crafted from nickel. It is formed through a meticulous precision expanding technique using nickel sheet. Its exceptional corrosion resistance,� reliable electrical conductivity, and impressive durability guarantee a long-lasting service life. Nickel mesh anodes possess notable benefits such as superior� current efficiency, cost-effectiveness, and exceptional corrosion resistance. They are versatile for use in various electrolytes, including those of acidic, alkaline, and chloride compositions. The adaptability of� nickel mesh� anodes to different shapes and sizes expands their applicability to diverse applications. Parameters Material: Nickel� Grade:Nickel� 200,� 205,� 207,� N2,N4,N6,N8 Thicknessï¼?Max� 50mm Widthï¼?50-1000mm Length:500mm-6000mm Mesh� count:1-300� mesh Features 1.Exceptionally lightweight, providing significant energy savings. 2.Demonstrates remarkable resilience against corrosion in both acidic and alkaline environments. 3.Exhibits unparalleled resistance to dry gases at room temperature and can withstand temperatures up to 550â?? in dry chlorine and hydrogen chloride. 4.Boasts impressive mechanical strength, featuring anti-ravel and flexible properties. Application Field Electrochemical Engineering Electrocatalytic Process,Hydrogen Production by Electrolysis Electrochemica Metallurgy Etc. Functional Material Serving as an effective noise reducer, vibration absorber, and wave energy damper. Furthermore, it provides electromagnetic shielding, flame-resistant properties, heat insulation, and other buffering capabilities. Chemical Power Supply Nickel-metal hydride, nickel-cadmium, fuel cell, and other foamed nickel positive and negative electrodes, which doubles the battery performance. Chemical industry The Catalyst and Carrier, Filter Medium (Such as Oil-Water Separator, Automobile Exhaust Purifier, Air Purifier, Photocatalyst Filter, Etc.)
SINGLE-PHASE POLE MOUNTED TRANSFORMER --OIL IMMERSED CATALOGUE 24KV UP TO 36KV >Features of Products The single-phase pole-mounted distribution transformers(single phase transformer) are specifically designed for the decentralization distribution network of servicing residential overhead distributior loads of town and countryside. They are also suitable for light and diversified power applications, These transformers are designed for the application conditions normally encountered on electric utility power distribution systems. Offers 2 basic transformer types and two kinds of metal core types Conventiona type and Complete Self Protect type, and for the transformer core Two types of materials are available: C.RGO. wound core and amorphous meta core. >Standard Full complied with ANSI C57.12.20.ANSI C57.12.00 >Product Features 1.Meet or exceeds ANSI Standards 2.Safe Handling.Installation and Operation 3.Attractive, modern appearance 4.Reasonable Structure 5.Fully-sealed 6.Higher system reliability 7. High security and reliability in operation 8.High capacity of overload and efficiency 9. Robust construction having excellent short circuit and thermal withstand capabilities 10. Transformers are more efficient by Reduced no-load losses and Reducedload losses Advantages: 1. long-term manufacturer of WOLD TOP FIVE HUNDRED ENTERPRISES 2. have accomplished so many projects in the worldwide 3.has much more experiences in tenders/projects 4.has a team with more than 12 engineers and supply good re-sales and after sales 5. design and customized products for the customers, OEM and ODM products 6. has subsidiaries in south African. 7.has a huge distributor network in the worldwide, especially in African market. and so on.
Brief Introductions: Type: Grinding Disc Bond: Vitrified Application: Automobiles; Machine tools; Household appliances; Aerospace industry Grinding Materials Bearing steel; High-speed steel; Cast iron; Ceramics, Silicon nitride Specification: Customized Trade Terms: FOB Packages: Hard carton Delivery Time: 15 workdays by express Description of Double Disc Grinding Wheel: company offers a full line of and CBN grinding wheels and dressing stones for fine grinding machines and single and double side lapping systems. Our vitrified diamond and CBN grinding discs have high grinding efficiency, high wear resistance and abrasive consumption, good surface quality and flatness of the workpiece. Applicable Areas of double discs: Hydraulic pneumatic components. vane pump, conversion valve, piston pump, fuel pump, hydraulic motor parts Compressor spare parts. air conditioner compressor vane, piston, Refrigerator compressor valve plate, cylinder block (grey cast iron or nodular cast iron), sleeve (alloy cast iron), slide (high speed steel) Engine parts. automobile fuel pump parts, booster pump parts, oil pump nozzle parts High precision shaft, seal, watch parts, molds, carbide blade, ceramic valve core, magnetic materials, etc. Shape of the vitrified bond grinding segment: regular hexagon, sector, square, circular, trigonometrical, hexagonal pellets (other shapes can be customized) Detailed Specifications can be customized Advantages of Moresuperhard Vitrified Bond CBN Grinding Disc - High grinding efficiency, long service life and good shape retention. - High strength synthetic diamond for high removal rates while excellent finish. - Sharp shape synthetic diamond for long dressing intervals. - Free cutting design for low cutting energy. - Better cutting edge with smaller chipping. - Good uniformity of size because the stable uniform structure and materials in abrasive layer. - High flatness, good finish, and parallelism. - Save your labor costs.
Aqua Fair String-Wound Filter Cartridges Aqua Fair filter cartridges offer true depth filtration with superior filtration technology. Aqua Clear depth filters have revolutionized filtration with a superior technology that overcomes the limitations and drawbacks of other filters. Aqua Fair technology produces superior depth filters with increased filtration capacity, longer lifetime, and higher performance that reduce overall costs. Aqua Fair filters have high structural integrity combined with a greater void volume, giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional filters. Aqua Fair filters are made of polypropylene, a recognized environmentally safe and recyclable material for purity and ease of disposal. Pure polypropylene Aqua Fair filter cartridges are free from any extractable and contain no lubricants, wetting agents, emulsifiers, ant-oxidants or anti-static agents, etc. They are suitable for use in applications like RO pretreatment (SDI reduction), drinking water and beverage processing, sea water desalination, gas purification, electronics and electroplating, photographic solutions, oil and gas production (deep well injection of produced water and wastewater disposal), cooling tower water filtration, etc. The standard pure polypropylene cartridge is extractable-free and engineered for superior filtration performance. It has been certified by ISO 9001:2015 to NSF/ANSI Standard 61 for Drinking Water System Components. Available in up 10 inch (1828 mm) length and 2â??3/8 inch (60 mm) diameter.
Aqua Fair String-Wound Filter Cartridges Aqua Fair filter cartridges offer true depth filtration with superior filtration technology. Aqua Clear depth filters have revolutionized filtration with a superior technology that overcomes the limitations and drawbacks of other filters. Aqua Fair technology produces superior depth filters with increased filtration capacity, longer lifetime, and higher performance that reduce overall costs. Aqua Fair filters have high structural integrity combined with a greater void volume, giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional filters. Aqua Fair filters are made of polypropylene, a recognized environmentally safe and recyclable material for purity and ease of disposal. Pure polypropylene Aqua Fair filter cartridges are free from any extractable and contain no lubricants, wetting agents, emulsifiers, ant-oxidants or anti-static agents, etc. They are suitable for use in applications like RO pretreatment (SDI reduction), drinking water and beverage processing, sea water desalination, gas purification, electronics and electroplating, photographic solutions, oil and gas production (deep well injection of produced water and wastewater disposal), cooling tower water filtration, etc. The standard pure polypropylene cartridge is extractable-free and engineered for superior filtration performance. It has been certified by ISO 9001:2015 to NSF/ANSI Standard 61 for Drinking Water System Components. Available in up 10 inch (1828 mm) length and 2â??3/8 inch (60 mm) diameter.
The us is self cleaning and enables excellent surface ratio. The bio-film carrier elements are produced from a material and with a procedure that provided properly stored and used ensures a minimum aging time of 20 years. Our can also be used as packing media for water coolers, oil water separators, and de-nitrification systems for polluted fish farms. Due to the use of the biological treatments get highly effective. Advantage Rapid carrier bio film formation mechanism Super decarburization, ammonia nitrogen removal capacity Excellent resistance to shock load performance Flexible way of engineering application Simple operation and maintenance Long service life-100% virgin HDPE material. Deoxidation and phosphorus removal effect is good Application The Sewage plant upgrade project , improve the standard and quantity New sewage treatment project of and Biological Aerated Filter process Biochemical treatment of reclaimed water River regulation denitrification and phosphorus removal Aquaculture in addition to ammonia nitrogen, water purification Biological filter media is used for biological deodorization tower Machine List No Machine Name Quantity 1 Vacuum Loader 1set 2 Hopper dyrer 1set 3 GB-SJ65/28 Single Screw Extruder 1set 4 PE MBBR pipe moulds 1set 5 Vacuum cooling tank 1set 6 Water cooling trough 1set 7 Haul off machine 1set 8 Flying cutting machine 1set 9 Storage silo 1set
Product Description: 1.Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2..Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. the chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
