Double Sided Pe Foam Tape Foam tape consisting of a PE foam backing and an acrylic adhesive. Features especially: High initial and ultimate adhesive strength. Conformable foam backing to compensate design tolerances or uneven surfaces Excellent temperature resistance performance Excellent sealing and shock adsorption. Double Sided Pe Foam Tape Application fields Permanent mounting of emblems, scriptings; Single letters or labels for cars; Pasting and fixing for car door edges,interior trim panels,water guide strips Double Sided Pe Foam Tape Pe Foam Tape Double sided tape suppliers Product construction: Backing material PE foam Type of adhesive solvent acrylic Total thickness 0.3mm/0.5mm/0.6mm/0.8mm/1.0mm/1.2mm/1.5mm/2.0mm/3.0mm Color Black/white/gray Release liner Red/blue/green/yellow/white film;white paper
Foam tape consisting of a PE foam backing and an acrylic adhesive. Features especially: High initial and ultimate adhesive strength. Conformable foam backing to compensate design tolerances or uneven surfaces Excellent temperature resistance performance Excellent sealing and shock adsorption. Application fields Permanent mounting of emblems, scriptings; Single letters or labels for cars; Pasting and fixing for car door edges,interior trim panels,water guide strips, Product construction Backing material PE foam Type of adhesive solvent acrylic Total thickness 0.3mm/0.5mm/0.6mm/0.8mm/1.0mm/1.2mm/1.5mm/2.0mm/3.0mm Color Black/white/gray Release liner Red/blue/green/yellow/white film;white paper
Double sided foam tapes with hotmelt and acrylic glue.
Self-Adhesive Bituminous Waterproof Membrane, its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminium foil or silicone-coated film, its bottom side is removable silicone-coated film. 1.Reliable application performance: its adhesion, water resistance, airtightness, high and low temperature resistance are excellent,and dimensional stability is good. 2.Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance. 3.Excellent mechanical properties: high bond strength, high tensile strength, good elasticity and extension properties, strong adaptability to interface deformation and cracking, and excellent follow-up to the deformation of objects. 4.The construction operation process is simple. THICKNESS: 1.5MM, 1.2MM. 1.0MM WIDTH: 5CM-20CM LENGTH: 2M-20M ISO, CE
Self-Adhesive Bituminous Waterproof Membrane, its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminium foil or silicone-coated film, its bottom side is removable silicone-coated film. 1) Replacement or repair of flashing 2) Extensions, porches, window frames and chimneys 3)Caravans and conservatories 4) Seals capping bolts and roof ridges 5) Guttering down pipes, skylights 6) Sealing parapets, valley gutters 7) Roof repair of portable building
Butyl tape is a kind of self-adhesive waterproof sealing tape which is made by advanced technology with butyl rubber as the raw material . It has strong adhesion to all kinds of material surface , at the same time it has excellent weather resistance ,aging resistance and waterproof , to the surface of the adhesive sealing ,shock absorption , protection and other function.
Self-Adhesive Bituminous Waterproof Membrane, its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminium foil or silicone-coated film, its bottom side is removable silicone-coated film.
6251 Polyimide tape is a general polyimide film that is coated or laminated on one or both sides with FEP Fluoropolymer, which imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. 6251 Polyimide tape is recommended in applications that require a heat bondable film, or moisture and chemical resistance beyond the capabilities of uncoated polyimide film. Applications Tubing Heater circuits Heat sealable bags Automotive diaphragms and manifolds Electrical insulation Typical Properities NO. Item Index 1 Tensile Stength (MPa) 156 135 2 Elongation at Break 76 93 3 Striping Force Tape to Tape (N/25mm) 4 Tape to copper 4 4 Surface Resistivity 1.5 1015 5 Breakdown Strength (MV/m) 90 6 Volume Resistivity (m) 2.1 1014 7 Dielectric Constant 50Hz 2-3 8 Dissipation Factor 0.0012 Polyimide film FEP Series is polyimide film coated with FEP on one or both side, imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. Mainly used in magnet wire insulation, formed coil insulation, CPTC and release liner. Type Polyimide film FEP Constructions In this series order code of three digits, the first and third digit represents the normal thickness of the coating FEP, the symbol 9 is used to represent 12.7um (0.5 mil) 6 to 2.54 um. HF is used to represent polyimide film coated with FEP on single side, and FHF to double side. Type FEP PI Film FEP Total um um um um HF019 25.4 12.7 38.1 HF019-B 30 10 40 HF019-C 40 10 50 HF011 25.4 25.4 50.8 HF021 50.8 25.4 76.2 FHF616 2.54 25.4 2.54 30.48 FHF616-B 3 25.4 3 31.4 FHF616-C 6.35 25.4 6.35 38.1 FHF919 12.7 25.4 12.7 50.8 FHF919-B 10 30 10 50 FHF919-C 10 40 10 60 FHF929 12.7 50.8 12.7 76.2 Thickness Tolerance % 10 Other size should be talked if we could produce.
Description Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types. Features â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation. â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder. â?? Non-toxic, tasteless, easy to clean. â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion. Application 1. Wallpaper adhesive. 2. Poster. Stamp adhesive. Precautions 1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material 2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days 3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid. It cannot be used and needs to be re-modulated Package 5kg/barrel (20L barrel. Plastic bag inside) 35kg/barrel (big blue barrel, lined with plastic bag)
Flexible, high tensile strength and moisture-proof tapes used in various applications such as heavy weight and sea worthy carton sealing, protection of highly polished surfaces against scratches and abrasion, export moisture-proof sealing of boxes, carbouy and containers of drugs, chemicals, pipeline fittings, for reinforcement & security sealings, etc. Used extensively in textile screen printings for mounting and masking of screens used in printing on various fabrics, clothes, sarees, etc., sealing of refrigerators and freezers cabinets prior to injection foam insulations, water / moisture proof sealing of cable joints / cuts.
Excellent insulation moisture proof tapes with high tensile strength, good abrasion resistance, long shelf life and strong adhesion for wire joints, splicing wire-ends, switch board insulations, panel wirings insulating wires on machinery or construction site, exhibitions, film studios, auto-repairs, heavy duty wire jointing and insulations, in LT / HT installations of transformers and wiring in generation, distribution and circulation application by Electricity Boards, etc. Specifications : IS 2448, IS 7809 Part II with Breakdown Voltage : 2KV min.
These tapes are made from a specially processed fabric for inhibiting moulds and fungal growth. Excellent conformability, high temperature electrical insulation tape with absorbent backing assuring high impregnation with varnishes. These tapes posses excellent adhesion and are printable / hand tearable. Used in telephone and tele-communication equipments, for coil windings, holding wires in motors, in core insulation in relay transformers and solenoid coils. Used in fan manufacturing. These tapes are used in deging slot insulation and securing terminal saddles to transformer coil. They are used in holding wire â?? leads in corrosive and humid environments. Class A insulation tapes with specifications IS 7809 Part II and breakdown voltages of 1.5KV.
These tapes are manufactured from electrical grade polyester film providing excellent electrical properties and di-electric strength. Excellent strength, conformability, high temperature, solvent & voltage resistance moisture-proof tapes providing an economical method for holding, identification, insulation and protection applications in electrical and electronics market for coil, transformer and capacitor wrapping. Available in different film thickness and colours. Used for insulation of wirings, cores & inter-layer insulations, edging of slot liners and anchor coil leads, splicing and holding of wires and harnesses. Insulating of the soldered and welded joints on a line. Protecting coils and preventing corrosion. Used in cable jointing kits. Coloured tapes are used in bus bar insulations, identification of leads, wires and cables, in polyester capacitors for outer wrap. Sealing of bus ducts, plugging extra holes in various equipments like current transformers and pipes in chemical plants for high frequency shielding. Phase separation of small three phase motors and external rotors, etc. Class B insulation tapes with specification â?? IS 7809 Part II and breakdown voltages : 5KV, 6.5KV & 8KV with film thickness of 1mil, 2mil and 3mil respectively available.
Establishes firm grip between two separate entities such as smooth matallic surface and rubber or polymer sheets thereby extensively. Used as Stereo mounting / stereo grinding tape for mounting rubber of polymer stereos while, flexo-printing on various substrates such as plastics, bags, woven and non-woven sacks, paper bags,tissue papers, corrugated carton printing etc., affixing carpets on the floorings, fixing of metal labels, name plates, monogram in automobile industries, in exhibitions & for holding window displays & sales promotion gimmicks. For joining / splicing applications, for leather industries, for fixing and holding plastic moldings, holding small components and parts on to coils and lugs in transformers / coil manufacturing, air-tight container or carton moisture-proof sealings, etc. Available with Release Paper Liner and Release Film Liner.
We are the manufacturers of Polyvinyl Alcohol solution from 10% to 20% solids.Prices are given at the best level according to your requirements.Please let us know your requirement.
Description Self-adhesive membrane is high-strength PE based,combined with bitumen layers, forming rigid copolymer waterproofing sheets with high endurance. Use 1.Foundation and basement waterproofing 2.Flooring,roof deck waterproofing 3.Interior and exterior walls 4.Tunnels,reservoirs,sewage treatment tanks Feature 1.Easy apply, no torch equipment required 2.Self-adhesive,fast and easy application 3.Can combine with the structure as a whole, therefore prevent vapor transmission and expansion Series Product CP-107/Gravel,PE/Thickness : 2/3/4/5mm CP-108/Sandstone/Thickness : 2/3/4/5mm OP2100/PE/Thickness : 1.5mm XOP2101/Aluminum foil Layin plastic mesh/Thickness : 1/2/3/4mm XOP2102/MuLTILAYER PE& Aluminum/Thickness : 1/2/3/4mm
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
Double sided scrim tape is made of high strength glass fiber yarn for strengthening the back material, coated with strong adhesion pressure sensitive adhesive on both sides; The double-sided scrim tape has high tension strength, strong viscosity, high wear resistance and moisture resistance. There is a thin layer of high temperature resistant glass fiber mesh cloth in the middle of the adhesive layer (glass fiber in a very wide range of temperature to maintain dimensional stability very little deformation) can provide vertical and horizontal two-way stable size without deformation. Adhesive materials range is very wide, including rubber, PP/PE, PBT/PET, ABS, PMMA, general plastics, metals, inorganic glass and so on. The adhesive can be maintained in a wide temperature range (temperature range depends on the nature of the adhesive material and the weight of the load). Features of Double Sided Scrim Tape Use high duty fiber glass(PES/PVS) mesh cloth as backing Both sides coated with aggressive pressure sensitive adhesive Protected by gold glassine paper release liner Backing material has very good tensile strength Extremely high adhesion strength Can be removed with no glue residue & no de-lamination Excellent resistance to abrasion, moisture, high temperature Can easily conform to many irregular surfaces Double Sided Scrim Tape vs Paper Tape Double Sided Scrim Tape (or Double Sided Fiberglass Tape) Composition: Double-sided scrim tape typically consists of a strong fiberglass mesh (also known as scrim) embedded between two layers of adhesive. This construction provides excellent strength and durability. Double-coated scrim tape is commonly used in construction and building projects for applications such as mounting, bonding, and sealing. The fiberglass mesh provides reinforcement, making it suitable for heavy-duty applications where strength and stability are crucial. Key Features of the Double-sided Scrim Glass Tape: Strong adhesion on both sides. High tensile strength due to the fiberglass mesh. Resistant to tearing and stretching. Suitable for indoor and outdoor use. Paper Tape Composition: Paper tape is typically made of paper or a paper-like material with an adhesive coating on one side. It lacks the reinforcement provided by fiberglass mesh. Paper tape is commonly used in painting and drywall applications for tasks such as masking, taping joints, and covering gaps. It is designed to be easily torn by hand and is often used in situations where flexibility and conformability are more important than sheer strength. Key Features: Easy to tear by hand. Flexible and conformable to irregular surfaces. Suitable for indoor applications where strength requirements are moderate. As a professional adhesive tape factory, Egret has high-quality aluminum foil tape for sale. Welcome to contact us if needed.
Polyimide adhesive tape is made of polyimide film with acrylic resin adhesive. Application:The heat resistance grade of this product is E grade, which is a transparent film with good transparency, flexibility, high mechanical strength and dielectric properties, uniform thickness, and shiny surface. It is used for low-voltage motors, electrical coils, inter-turns, end wrapping insulation, gasket insulation, magnet wire wrapping insulation, E and B class electrical duct insulation and capacitor dielectric, cable wrapping, transformers and composite materials manufacturing, and can also be used in packaging, FRP, clothing lining collar and other occasions. Nominal thickness:
Material: Tissue Glue: solvent acrylic Color: Translucent Thickness: 100/140/160micron Liner: Paper Size: various and customized Features: strong adhesive, great comfortability to various surfaces, waterproof Application: Great for bonding signage, nameplates, light signs, plastic board, and so on.
