Pneumatically pump the speed of oil :0.6-1.6L/min Connects the height of oil :1.9m Pot body: 80L Tray:10L Cup amount : 10L These exhaust extraction equipments are appliances to change the oil of engines, differentials, gearboxes, ect... quickly and practically on any vehicle on a lift or over a pit and on the ground. Brake oils, corrosive liquids, fuels, or infiammable liquids in general must not be extracted.
Y3090 Air Operated Oil Collecting Machine Technic card: Draining speed: 0.6-1.6L/min Oil drain pressure: 1bar Pot body: 75L Air consumption: 200L/min Cup : 10 L 75 l. trailer-mounted suction equipment complete of 6 suction probes (rigid diam. 8 x 900 mm. - flexible diam. 8 / 6 / 5 x 900 mm.). Appliances to change the oil of engines, differentials, gearboxes, ect... quickly and practically on any vehivle. They anable extraction of hot exhausted oil (70/80�° C) through one of the 4 sensors provided, from the engine sump of vehicles on the ground. After depressurizing (creating a vacuum inside the tank thanks VENTURI system), they are entirely independent and need no continuous connection with the source of compressed air (compressor). Simples to use, extraction is pneumatic , they are equippedes with a pressure relief valve set to 0.5 bar that ensures absolute safety. The outlet pip, equipped with a terminal elbow, is 1.5 m long. The suction tube (with heat insulated handle) is 1.65 m long. Equipped with 6 suction probes: rigid diam. 8 mm and flexible diam. 8 / 6 / 5 mm .
Pneumatically pump the speed of oil: 0.6-1.6L/min Connects the height of oil: 1.9m Pot body: 80L Tray: 10L Cup amount: 10L These exhaust extraction equipments are appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehicle on a lift or over a pit and on the ground. Brake oils, corrosive liquids, fuels, or infiammable liquids in general must not be extracted.
Assemblies: --suction needle: Adaptable for different engine with different size (6root) --hose reel: 1/2", 2m (art. 82010) --pneumatic pump: 1: 1 --bracket: Art. 33115 --vacuum meter and air nipple Suction speed: 2L/min (suction hose dia. 8mm, engine temperature, 60)
Technic card: The pump speed of oil: 0.6 -1.6L/min The height of connect oil: 1.9M The pot body: 80 L Tray: 10 L Oil drain pressure: 1bar The WASTE SERIES adapt to a high-level professional vacuum generator: The immediate vacuum suction of the pot makes it possible for the tank to keep in a highest degree of vacuum. It turned out to be a fastest speed for oil draining. For what it extract is air not the oil, there is no corrsive for the machine, it makes it possible for a longest lifetime. Furthermore, it equipped with a waste oil pot, it is convinient for our custmer to use in a place that is no air supply
Technic card: Air consumption: 200L/min Height of oil: 1.9m Pot body: 80L Saliver: 10 L Oil drain pressure: 1bar With an oil collecting pot, it is convinient for a place that is no air supply.
Technic card: Draining speed: 0.6-1.6L/min Oil drain pressure: 1bar Pot body: 75L Air consumption: 200L/min Cup: 10 L 75 l. Trailer-mounted suction equipment complete of 6 suction probes (rigid diam. 8 X 900 mm. - flexible diam. 8 / 6 / 5 X 900 mm. ). Appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehivle. They anable extraction of hot exhausted oil (70/80�° C) through one of the 4 sensors provided, from the engine sump of vehicles on the ground. After depressurizing (creating a vacuum inside the tank thanks VENTURI system), they are entirely independent and need no continuous connection with the source of compressed air (compressor). Simples to use, extraction is pneumatic, they are equippedes with a pressure relief valve set to 0.5 bar that ensures absolute safety. The outlet pip, equipped with a terminal elbow, is 1.5 m long. The suction tube (with heat insulated handle) is 1.65 m long. Equipped with 6 suction probes: Rigid diam. 8 mm and flexible diam. 8 / 6 / 5 mm.
Pneumatically pump the speed of oil: 0.6-1.6L/min Connects the height of oil: 1.9m Pot body: 80L Tray: 10L Cup amount: 10L These exhaust extraction equipments are appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehicle on a lift or over a pit and on the ground. Brake oils, corrosive liquids, fuels, or infiammable liquids in general must not be extracted.
Technic card: Draining speed: 0.6-1.6L/min Oil drain pressure: 1bar Pot body: 75L Air consumption: 200L/min Cup: 10 L 75 l. Trailer-mounted suction equipment complete of 6 suction probes (rigid diam. 8 x 900 mm. - flexible diam. 8 / 6 / 5 x 900 mm. ). Appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehivle. They anable extraction of hot exhausted oil (70/80�° C) through one of the 4 sensors provided, from the engine sump of vehicles on the ground. After depressurizing (creating a vacuum inside the tank thanks VENTURI system), they are entirely independent and need no continuous connection with the source of compressed air (compressor). Simples to use, extraction is pneumatic, they are equippedes with a pressure relief valve set to 0.5 bar that ensures absolute safety. The outlet pip, equipped with a terminal elbow, is 1.5 m long. The suction tube (with heat insulated handle) is 1.65 m long. Equipped with 6 suction probes: Rigid diam. 8 mm and flexible diam. 8 / 6 / 5 mm.
Digital oil flowmeter suitable for the diesel oil flow meter guns and have all kinds of the size.
YJ-120 series Mechanical Flow meter is used for fuel transferring application, diesel fuel, kerosene ect.These flow meters are reliable, inexpensive, and easy to install and simple to calibrate on the workplace.lt has the advantage of easy reading, quick resetting, and knob, flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999/999.9.The master totalizer registers up to 999999/9999, 9999.Aluminium metering chamber, thread connection. Mechanical readout device with rotating wheels.
Refueling gun is the output terminal of the refueling machine in the gas station. Generally, self-sealing refueling guns and composite refueling guns are commonly used. *Manual and Automatic Fuel Nozzles *Fuel Flow Meter *Diesel and Petrol Fuel Pump *Dispenser Pump Set *Vane Pump *QBY/QBK Series Air-Operated Diaphragm Pump *Swivel,Hose,Breakaway,Accessories Parts Etc.
1. Nominal diameter and flow rate: Model Nominal diameter (mm) Minimum flow rate (L/min) Rated flow rate (L/min) Maximum flow rate (L/min) Display value of meter 2. Metering accuracy: �± 1% 3. Measured medium: Gasoline. If the medium is kerosene or diesel oil, the readings of flow meter shall be corrected. Refer to article 5 of clause 4 for details. 4. Maximum working pressure: 0.1MPa
Refueling gun is the output terminal of the refueling machine in the gas station. Generally, self-sealing refueling guns and composite refueling guns are commonly used. *Manual and Automatic Fuel Nozzles *Fuel Flow Meter *Diesel and Petrol Fuel Pump *Dispenser Pump Set *Vane Pump *QBY/QBK Series Air-Operated Diaphragm Pump *Swivel,Hose,Breakaway,Accessories Parts Etc.
Automatic Oil Nozzle It is an auto nozzle for diesel, petrol, fuel which is suitable for pump system only. Its inlet thread for refueling is 1" BSP (F). With a flow rate of 18-60 liter/min, and "Accu-stop" flow control, it can refuel lubricant precisely.
1. Nominal diameter and flow rate: Model Nominal diameter (mm) Minimum flow rate (L/min) Rated flow rate (L/min) Maximum flow rate (L/min) Display value of meter 2. Metering accuracy: �± 1% 3. Measured medium: Gasoline. If the medium is kerosene or diesel oil, the readings of flow meter shall be corrected. Refer to article 5 of clause 4 for details. 4. Maximum working pressure: 0.1MPa
Product Description Hot popular selling hand operated oil pumps... suitable 200L oil drum. Model: Y-25 Type:Hand operated Suction length:1.5M Max.heigt:5M Flowrate:15-25L/Min Revolution Speed:70/min Net weight:4.85KG Total length:1.3M,suitable for 200L barrel. Using instruction: when installation the tube thread please coated with a little magnetic oil and tighten to keep good seal. Before using please filling a little lubrication oil inside of the pump.Then turn round handhold to suction oil. After using please filling some lubrication oil into the pump.
Hot popular Stainless steel hand operated oil pumps... suitable for 20-30L oil drum;60L oil drum 200L oil drum.
He models are equipped with aluuminium-coated rigid spout on series. Flexible hose dia. Lenght supplied on request mod. Double acting oil pump 24 l/m Body fitted directly on drum. Standard equipment: Flexible hose d. 3 / 4 bsp 1300 mm. Long, bung-adaptor and Viton �® Seal Reciprocating volumetric single acting or double acting hand-operated pumps MEDIUM FLOW-RATE made in carbon-steel with aluuminium components and viton packings.
The hand operated oil drum pump is pumping oil or similar. For the details please review the drawing.
