Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution.Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Wrought Iron Accessories Manufacturer Wrought iron accessories are commonly used to build fences, railings, gates and other decorative structures. These wrought iron parts are known for their strength and durability, making them popular for residential and commercial projects. From traditional to modern designs, wrought iron parts offer endless possibilities for creating striking and functional architectural elements, such as wrought iron gate parts, wrought iron fence parts, or wrought iron railing parts. The company is a professional manufacturer of Wrought Iron Accessories,Casting Spiral Staircase,Decorative Steel Ornaments. The factory has the most advanced production lines , and its technical indicators have reached the international advanced level. The company is a professional comprehensive company integrating engineering material research & development, production and sales.We envision that we will be the leader in manufacturing and producing high quality products in the Chinese and international markets. We hope to cooperate with more friends for mutual benefit. The product will supply to all over the world, such as Ecuador ,Morocco ,Mexico ,South Africa ,Nicaragua . Over the years, with high-quality products, first- class service, ultra-low prices we win thee trust and favor of customers. Although we provide the highest quality products and solutions, our professional after-sales service team provides effective and satisfactory consulting services. Based on high-quality products and perfect pre-sales/after-sales service is our philosophy, some customers have cooperated with us for more than 5 years. We work closely with every distributor to ensure that they can get more opportunities in their respective markets in the right way. The company always takes quality as the fundamental, adopts stable and reliable raw materials, introduces advanced process equipment, efficient and pragmatic management, executes strict quality control standards, continuously strengthens upstream and downstream cooperation, explores and innovates to insist on sound operation, and lays a good foundation for further development. In the future, the company will continue to strive to become an excellent tire production and distribution platform. With high quality products, competitive prices and efficient services, we are capable of becoming your satisfied Custom Wrought Iron Gates Manufacturer supplier and business partner.
Wholesale Chew Toys For Dog Teeth Cleaning OEM and ODM are accepted. No MOQ requirement, small orders are accepted. At Chew Toy, we understand that every pet deserves safe and enjoyable playtime experiences. That's why we have dedicated ourselves to creating high-quality, durable, and engaging chew toys for your beloved furry companions. With our mission to promote their physical and mental well-being, we bring you a wide range of innovative and exciting toys that will keep your pets entertained for hours on end. A chew toy is a specially designed toy that is intended for pets, particularly dogs, to chew on. It serves several purposes, including providing entertainment, mental stimulation, and promoting good oral health for your furry friend. Chew toys come in various shapes, sizes, and materials, catering to different dog breeds and their chewing needs. They are typically made from durable materials such as rubber, nylon, or natural fibers, which are tough enough to withstand a dog's strong jaws and sharp teeth. Some chew toys may also have textured surfaces or grooves that help massage the gums and clean teeth, contributing to overall dental hygiene. The primary function of a chew toy is to satisfy a dog's natural instinct to chew. Dogs have an inherent need to chew, which can stem from teething discomfort, boredom, anxiety, or simply as a way to explore their environment. Providing them with a suitable chew toy helps redirect their chewing behavior away from household items or furniture, saving your belongings from potential damage. Chew toys offer mental stimulation and can help alleviate boredom in dogs. Many chew toys are designed with features like treat compartments or hidden squeakers, making them interactive and engaging. These toys can keep your pet occupied, preventing them from engaging in destructive behaviors and promoting a healthy outlet for their energy. When introducing a chew toy to your dog, it's essential to choose the right size and type based on their breed, age, and chewing habits. Supervision is also crucial, especially when introducing a new toy, to ensure your pet is using it safely and not ingesting any small parts. Regularly inspecting the chew toy for wear and tear is important to prevent choking hazards and replacing it when necessary. Overall, a chew toy is a valuable accessory for dog owners, providing a safe and enjoyable way for dogs to satisfy their chewing needs while promoting dental health, mental stimulation, and preventing destructive behaviors.
ZB6705-8 HX Long Thread lifting screw Eye Bolt Rigging Hardware Eye Bolts and nut Lock Stainless Steel 316 Eye bolt is made of stainless steel 316/304. It has good performance on anti-rust and corrosion resistance. Every single part does pass our full and strict inspection before shipping to you. The quality can be assured. * We have three models of this products, if you need, you can contact us. Size M8*80 Place of Origin China Brand Name RICHWITS Product Name HX Long Eye Bolt MOQ 2 Pcs Color Silver Certificate ISO9001 Logo Accept Customized Logo Package Bubble Bag+Carton Weight 0.12KG WLL 250KG Delivery Time 2-15days Quality High Top Wudi Zhibo Metals Co., LTD is located in the Wudi town Shandong Province which is beautiful and rich shore of Bohai Sea. Our company possesses the advantaged position on the verge of Qingdao and Tianjin ports. And we have convenient transportation extend in all directions in China, especially to Beijing city. Wudi Zhibo Metals Co., LTD is meanly engaged in the metal products. Our business is a system includes the designing, production, machining and selling. Our products are camlock coupling, rigging hardware, marine hardware, auto accessories ,as well as the machine parts .According to the standards of API ANSI BS DIN JIS, the products are made to pretty , rational construction, superior performance. The material of our products is kinds of stainless steel ,such as 304\316\316L ;aluminum; brass; pp; nylon and carbon steel. The products are used in many area covering the marine transport, petrochemical industry, Pharmaceutical papermaking, food industry ,electricity industry and so on. Our products are exported to America England, France, Canada, Australia, Holland, Japan and Korea, and the domestic market is vast too,which gain many trust and favorable receptions home and abroad. From the established to now, Wudi Zhibo Metals Co., LTD obedience to the idea of "Quality First, Creditable Management " and objective of the "Win-Win", all the staffs are devote to the technological innovation, building enterprise brand ,to meet the needs of the clients. Welcome the friends worldwide to visit our company and make business negotiations.
